Is it possible to extend the time-out of release of app?

Similar Questions

• Disable the time-out SSH ESXi 4.1?

  Hi all

  I use a scheduled task and ghettoVCB to back up ESXi system, but the SSH timeout keeps giving me grief, is it possible to disable the time-out and have the demon of support tech SSH running all the time?

  See you soon,.

  Joe

  You can disable SSH timeout by setting the value 0, which disables the time-out all together. To do this, you will use the DCUI. Take a look at this VMware KB which guides you through the activation process of TSM - http://kb.vmware.com/kb/1017910 and you are going to disable the timeout TSM

• How to adjust the time-out setting?

  I'm in a certain OBIEE in Firefox which, by nature, do not take a long time to run. One of my local Technical Support people suggested increase Firefox's timeout setting (he showed me how to do this once, but I didn't write it). Can you provide instructions written (or annotated images of the screen), please?

  Alright. There are two ways to do this. You can extend your timeout, or you can completely disable timeout. Depending on how you are using firefox, can be useful. If you want to extend your time-out, type about: config in your search bar on the top. From there, need you a list of preferences. There is a search bar. Type "Timeout" in there. The top two are disable the time-out and the 'County timeout'. If you want to disable the timeout, simply double-click the "enabletimeout" on the top. This will change the false value. If you want to change the value of how long it takes to timeout, double-click on the "CountTimeout" and type in your new value. If this is not sensible, see screenshots.

  Have a great day!

  -Jon

• The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

  I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

  Hi KarlMaskery,

  1. When you receive the error message?

  2. you have any external hard drive connected to the computer?

  3. do you have security software installed on the computer?

  4 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Error - the specified i/o operation on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period.

  Original title: XP USB device timeout - is there a solution?

  Under all the circumstces I get: "Windows - Device Timeout" The specified IO on Device\Harddisk2\DR4 did not complete before the time-out expired period.  The drive is a Sony external 150 GB USB2.  The only way to remedy this is turned off and let windows re - recognize.  It stops usually after 18minutes regardless of activity. I did all the USB install no etc no difference.  Please advise as soon as POSSIBLE!  Please not flaky ideas or suggestions.  P.S > I looked the FIX for USB, but it is not specific to my question - if I ask this question instead.

  Hello

  ·        What is the brand and the model of your machine?

  ·        What steps you have tried to solve the problem other that Reinstall USB?

  ·        You did it all change hardware or software on your machine before this problem?

  You can contact the manufacturer of your computer to update the chipset drivers and check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the time-out for the vote of the files

  Hey, is there a way to change the default time-out for files with right to vote. The idea: I have a grid storage (soft). Then I configured the external redundancy for my roc diskgroup where is my votingfile.
  
  When one of the stored mirror gets turned off, the system hungs for almost 2 minutes. The deadline to vote is set to 99 seconds, right? This should be the default setting, at least, according to the journal of crs alerts.
  
  Is it possible to change this value?
  
  At present, the database gets shutdown, after which expires the time-out.
  
  Christian

  Hello
  This note will help you with the IO time-out, but I think that's not your problem.

  See:
  Component sync (CSS) of the Oracle Clusterware services maintains two mechanisms of heartbeat heart 1.) the heart rate of the disk on the device with the right to vote and 2.) the heartbeat of the interconnection network which establish and confirm the valid membership of node in the cluster. Both of these mechanisms of heart beat have a timeout associated value. The heartbeat of disc has an interval of time-out of e/s internal (DTO disk time-out), in seconds, to complete an i/o to the drive to vote. The parameter misscount (MC), as noted above, is the maximum time, in seconds, that can not miss a heartbeat of network. The e/s disk heartbeat time-out interval is directly related to the setting of parameter misscount.

  Change the default value of misscount not only affects the delay interval to wait for IO to the drive to vote, but also affect the tolerance of pulses missed through the interconnection network.

  MissCount should NOT be changed to work around the problems mentioned below.
  HBA QLogic cards with a link down Timeout greater than the default misscount.
  Cables wrong with Matrix Storage/SAN this purpose IO latencies
  SAN switch (such as Brocade) failover latency greater than the default misscount
  EMC Clariion array at the intrusion of the AOC for superior to default misscount MS backup
  EMC PowerPath path and to repost IO error detection and redirect than default misscount
  Bad network configuration SAN that creates latencies in the path of the I/O.

  Then I configured the external redundancy for my roc diskgroup where is my votingfile. When one of the stored mirror gets turned off, the system hungs for almost 2 minutes.

  As you use external redundancy Oracle knows not that there is a disk mirrored by behind.
  Perhaps the OS or storage keep I/O when you stop mirroring due to a bad configuration. I think that this problem is related to the OS or storage not the Oracle Clusterware.
  If you perform this test with the diskgroup (external redundancy) storing data will have the same result.

  Kind regards
  Levi Pereira

• Save before the time-out...

  Hi all...
  
  Please help me solve this problem.
  Let's say I have a simple form 'report' on the EMP table. In my application, I have the "Timeout" for 15 minutes.
  As you know if define us the time-out and the end user is idle for 15 minutes, the application will log them after 15 minutes.
  Is it possible to save your changes, just before the end user got "timed" out
  I mean if the user has made a few changes and idle for 15 minutes and hit the button changes apply after 15 min.
  they lose the changes they made.
  
  Is it possible to save these changes before the time-out period.
  
  
  Thank you

  Yes, there is a difference between these two times.

  I need to get this "APEX downtime" to notify users or make the BACKUP process before that date.

  I don't have your question, I think I got it now, you want to know the downtime from the time displayed on tracks internally within the apex. I couldn't find all the tables where this information is held, probably someone from the dev team can give some information about this part.
  However, you can set a JS variable to the loading of the page with the date and then compare with the current date in JS to get a rough estimate of which (given that the variable gets reset loading the page, so the apex timer is also).

  to run the JS code above, I need to have a (hidden) button with the name 'IDLE_TIME_OUT_SAVE '.

  No you don't need any button, it works fine without it. By default, apex buttons send the page with their name as application, this does not mean that buttons may not submit the page.

• Reset the time-out without clicks or the keyboard input

  Hey all,.
  SO, I have a RFID reader that triggers events in a film's Director. My timeout is set to 2 minutes, but it is possible for the user to never touch the keyboard or touch screen and always in interaction with the program through the RFID interface. How can I reset the timer of the time-out for the program don't timeout in the middle of the activity of the user. I can't find anything in the documentation that says, although it seems that there should be a property that I could put everything back to 0. Like countDownTime or something like that. Any ideas?
  
  -Bruce

  > it seems there should be some
  > property that I could just reset to 0.

  If you use the ' timeout' Manager (and setting of the)
  timeoutLength), try to reset 'timeoutLapsed' to zero when you need to.

• MacBook Air how to extend the timer

  I listen to a tape of meditation 1 hour and 14 minutes and it stops after an hour

  How can I extend the timer to last more then 60 minutes? It's a Mac Book Air 13

  Not sure about "Timer" you mentioned, even if your MacBook Air does not work in mode "sleep" more than 1 hour of system preferences > energy saver, and then set computer sleep more than 1 hour.

• extend the time for the home screen before its judgment

  How to extend the time before my phone turns off?

  settings - touched / access code - require the access code - see if you can change it.

  If you have a job exchange account on your phone you will not be able to change it.

• Is it possible to keep the timer "always on top"?

  When you use the timer I like to keep the timer of disappearing from the screen saver, but I didn't understand how to do... If that's possible.  After the timer starts, he goes down to a few seconds and the clock face appears again.  To check the time remaining on the timer, you must click to the home screen and select new application timer... which, in few seconds again goes to the background and the face of the clock reappears, again he must open the clock app to see the remaining time.  If there is a way to keep the timer "on-top" without having to repeatedly touch the screen during execution of the timer, I have not discovered.  I would also add the timer to my eyes so I can toggle to him as well.  Of course, I can do it on my iPhone, but the Watch has not yet this ability.  Apple engineers could make sure with the timer and the timer if they see the need.  Are there others who want that ability as well?  I think so.

  Hello

  It is not currently possible to add Timer looks. However, your watch can be configured for more convenient use of the application of the timer:

  • Set your watch to return to the last app used to raise your wrist:
    • On your iPhone, in the application of the watch, go to: Watch My > General > wrist Detection - turn on.
    • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
      • Raise the topic on the wrist, select RESUME last activity.

  After you start a timer by opening the timer app, your watch will return to timer (for as long it remains the last app used) when you then lift your wrist.

  • Add a Timer to your dial of the watch as a complication. When you view the time on your watch:
    • Firmly press the display > drag left / right to the face of the watch you want to customize (not to slip if you want to customize the current face of the watch).
    • Press the Customize button.
    • Some watch faces offers more than one screen customization options > move left until you reach the last screen to select (if available) complications.
    • Tap a complication to customize what is shown in this place.
    • Turn the digital Crown to scroll through available there complications until you reach Timer.
    • Press the digital Crown, then press the dial to return.

  To start the timer directly from your watch dial, press the complication. Once started, the remaining time will be then showed complication on your watch until the end of the timer dial, when the application opens for you to make them disappear.

• Is possible to extend the graphics memory or replace the graphics card on the Satellite P10 504

  Anyone know if it is possible to extend the video memory on the satellite p10 504, or to replace the video card. Because the memory is too small to play most of the good games.

  Hello

  Unfortunately, it is not possible to increase the graphics memory or replace the graphics card on the laptop computers of s.
  Please don t compare cell phone technology with the desktop simply.
  Laptops use other motherboards and graphics cards are mostly welded on the boards!

  Nothing to do, buddy

  I wouldn't buy a laptop if you want to play the latest games! Why? Because of the possibilities of upgrading equipment.
  The desktop PC can be upgraded very easily but not the laptop

• Is it possible to extend the warranty of the MacBook Air 13' after a year?

  Is it possible to extend the warranty of the MacBook Air 13' after a year?

  The extended warranty is available for 60 days after purchase. It seems that you have missed this deadline.

• Is it possible to change the timer increment?

  The timer is changing in increments of 100 milliseconds. Is it possible to decrease it to 1 millisecond? For my application, I need to know when the waveform is a multiple of a number specified, for example, 7 millisecond. I have a Boolean indicator, and I would that he true to see the ot whenever the time is a multiple of this value.

  Is is possible to change the timer for this increment? Or y at - it a better way to reach my goal?

  Your problem of synchronization is the express VI simulate Signal.  You say it take value of 100ms of data.  So your loop will run through the 100ms.  If you want your loop to go to the 1ms (good luck with Windows), tell the express VI to collect only 1ms to a data value.  In your case, it would be 360 samples instead of 36 samples k.

• How to extend the time that your computer stays on without activity

  How to extend the time that your computer stays on without activity?

  How to extend the time that your computer stays on without activity?

  Start button > in the search box, type power options > press the Enter key > left column > click on choose when turn off display > selections for battery and plugged inare. Click on the pointer, and you can choose how long. It may be 1 minute forever. Take that seek you. > click save changes when done. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.