Is it possible to toggle different parts of a dynamic form by checking / unchecking a checkbox?

Similar Questions

• I want to run a SWF in several screens, is - it possible a .swf can divided into different part and meet

  I have a flash file, I want to split application in 4 different part and individually run on 4 different screens (monitors o/p). If this is then can not possible I develop 4 rows of 4 different screens, but how they can jointly associated with one application.

  I have the application developed in Adobe Flash CC but no problem to switch technology. Please suggest...

  Thank you

  Maury

  Yes, you should be able to do it with a bit of CODE.

  Apply a transformation scene (scaleX = 2, scaleY = 2) and change the x / y position corresponding to higher positions left, upper right, lower left, lower right.

  The export of 4 different sovereign such as each of them show only a quarter of the original film after processing and implementation in different points of view.

• Best way to add words to the different parts of the frame?

  There are sometimes opportunities when I want to put the text on different parts of the screen, possibly with different fonts sizes and colors etc.

  On this occasion, I'm going to fill in the spaces in the jury of the Clap below.

  Is there a quick way to do it using a single title I can position each word (or groups of words) exactly where I want to?

  Or do I just add writing in Photoshop? This would limit still edit in FCP X.

  To add the likelihood that I will use fonts like marker felt, slate etc.

  

  Change the fonts and sizes is normally done in any title - just select the text and apply the changes. No need for a special title for this.

  To move the text independently:

  It is very easy to create a title in movement with more than one piece of text - this is a title with two layers of separate text:

  

  By posting the Position for each text, you can place and move independently.

  This will appear in the tab title of the Inspector instead of the video tab.

  In a quick test, I could not change the name of the parameter, but it works very well

  :

  

  

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• Pages - selection of different parts of the text at the same time

  The old version of Pages used to have a really useful feature that allowed you to select the different parts of a text at the same time by pressing the command at the same time you did drag the cursor over the text you want to select.

  This feature doesn't seem to be available on the new version, which is a shame because it was really, really useful.

  Is there another way to select different parts of a text at the same time?

  I would be really grateful if someone could find a solution!

  Any rejection of Pages v5 supports non-contiguous text selection. No tricks to work around this design limitation. You may always continue to use Pages ' 09 v4.3 If you wanted these "professional" features of return.

• Satellite A205 - S4629 BIOS Update Fail - file has different part number of BIOS

  I used the download from Toshiba support page to identify my notebook A205-S4629 Satellite of model and downloaded the following BIOS update utility sa200f0v520.exe.

  After construction the IOS Installer disk and running the Phoenix Phlash16 utility I get the following message "file a different part number of BIOS.

  The utility uses the image file after MW10M520.ROM.

  Any contribution is appreciated,

  Thank you

  Hello

  As far as I know the BIOS package downloaded from the Toshiba WE page driver contains the ZIP file self-extracting WinRAR 32-bit which includes both based on Windows and disk according to the BIOS update installation options.

  Have you tried to update the BIOS using the BIOS Win-based?

  What operating system do you use?

• Is it possible to buy different Windows operating system in bulk?

  Original title: buying in bulk

  Is it possible to buy different Windows operating system in bulk?

  It is, see the purchase program volume here to purchase licenses of Windows in bulk: https://www.microsoft.com/en-us/Licensing/how-to-buy/how-to-buy.aspx

• Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Hello.

  Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Desktop: Windows XP 32-bit Home Edition. Laptop: Windows Vista Home Premium 64-bit.

  I have a DVD I paid for and used a software to copy video clips (unprotected) to mpeg2 files. There are 4 of them. It was a DVD recorded in 2004 at a dance event. It is not a commercial version.

  XP: The 1st clip allows me to open it in Windows Media Player 11 and I can drag autour in various places to look at different times of the clip. The clip of 2nd, 3rd and 4th are locked and won't let me pick different times to watch. They will play through.

  In Vista: I can't the cursor around anywhere, then select any time to look into all parts of clips with THE 4 clips.

  I took the clips, put them on a USB stick, moved in both sense between each system. I tried two more than once.

  I used the software to rip the clips on XP and Vista. It's the same result. The fault seems to lie with XP.

  Perhaps some of this DVD had some kind of protection against copying for XP but not Vista (and other OS of potentially). Or it's the encoder?

  My account has been locked or something, I couldn't answer.

  It is therefore probably encriptación with Windows Media player. I can read files with RealPlayer on Windows XP and Vista in Windows Media Player.

  Tried to use my software for video editing, re - export files in mpeg2. But each of them had sound problems. So, this is how the DVD is probably protected.

  I have something on Vista operating systems and a workaround with XP using RealPlayer for the original files. I'll keep looking. It's mine to archive all I want at this stage.

• Printing pictures, is possible to print different pictures on one page at the same time?

  When you print pictures, is it possible to print different pictures on one page at the same time? If this is not the case, the photo paper is lost because you can't get your full 4 prints if you do individually. There is a similar question on the change of the position of the image, that might work. However, the answer is not helpful at all.

  The following steps may be worth a try:

  In Windows Live Photo Gallery... Hold your Ctrl key
  and left click / Select the four pix you want to print...

  In your toolbar left click... Print... Print / Next...

  Now you should see the selection of the photo screen
  the photo printing wizard with the 4 pix selected.

  Left click... ... Left click... "Print options".
  and choose the Type of paper and quality parameters.

  Left click... Next... now you should be on the layout
  Screen.   Scroll and select... 3.5 x 5 cut
  prints cropped and rotation to fit.

  The 4 different pix should appear on the print template.

  Click next and your pix should start printing.

• Adding key event to different parts of a pie chart

  Hi, I'm working on a Blackberry app I need to create pie chart from an array of integers. Unfortunately I could not find any graphics APIs for Blackberry (is there really one?), so I've implemented using the method (graphics.fillArc).

  Here's my PieChart class:

  public class PieChart extends Field
  {
      //declaring private variables to store data
      private int[] percentage;
      private int[] angles;
      private int totalRecords;
  
      //declaring colors to be used in pie chart
      private final static int[] availableColors = { 0x00CDCD, 0xFF0000, 0xFF00FF, 0xCC9900, 0x9900FF, 0x990000, 0x66FF00, 0x6600FF, 0x3300FF, 0x0000FF};
      private final static int totalAvailableColors = 10;
  
      //assuming 250 for chart width and height
      private int chartWidth = 250;
      private int chartHeight = 250;
  
      public PieChart (int[] marks)
      {
          //calculating percentages and angles covered by each record
          totalRecords = marks.length;
          int sum = 0;
          for (int i = 0; i < totalRecords; i ++)
              sum += marks[i];
          percentage = new int[totalRecords];
          angles = new int[totalRecords];
          for (int i = 0; i < totalRecords; i ++)
          {
              double percent = marks[i] * 100 / sum;
              percentage[i] = (int) percent;
              angles[i] = (int) (percent * 3.6);
          }
      }
  
      protected void layout(int width, int height)
      {
          //setting the field to cover the whole width of display
          setExtent (Display.getWidth(), chartHeight);
      }
  
      protected void paint(Graphics graphics)
      {
          //generating a random color from predefined colors
          Random random = new Random();
          int lastAngle = 0;
          int previousColorIndex = -1;
          int startColorIndex = random.nextInt(totalAvailableColors);
          int currentColorIndex = startColorIndex;
  
          //adding offset to create the chart at center of the screen
          int offset = (Display.getWidth() - chartWidth)/ 2;
  
          for (int i = 0; i < totalRecords; i ++)
          {
              //if last record, cover the remaining area of the circle
              int finishAngle = i == totalRecords - 1 ? 360 - lastAngle : angles[i];
  
              //drawing the arc
              graphics.setColor(availableColors[currentColorIndex]);
              graphics.fillArc(offset, 0, chartWidth, chartHeight, lastAngle, finishAngle);
  
              //calculating text position to print the percentage
              int txtX = (int) (125 + 75 * Math.cos(Math.PI * (lastAngle + angles[i] / 2)/180));
              int txtY = (int) (125 - 75 * Math.sin(Math.PI * (lastAngle + angles[i] / 2)/180));
              txtX -= graphics.getFont().getAdvance(String.valueOf(percentage[i] + "%")) / 2;
  
              //drawing the percentage over the respective section
              graphics.setColor(Color.WHITE);
              graphics.drawText(String.valueOf(percentage[i] + "%"), txtX + offset, txtY);
              previousColorIndex = currentColorIndex;
  
              //tracking total angle used so far
              lastAngle += angles[i];
  
              //checking if color generated is previous color or starting color, if it is the last of the record
              do
              {
                  currentColorIndex = random.nextInt(totalAvailableColors);
              }
              while ((i == totalRecords - 1 && currentColorIndex == startColorIndex) || currentColorIndex == previousColorIndex);
          }
  
      }
  
  }
  

  Now, when the user touches a any part of the generated pie chart, I need to show him the details of this particular section, which is different for different parts of the chart (for example. Say that if brands of students is used, during the click on an article I have need to display information about the marker). From my understanding, different parts of the pie chart must be different fields to contain the touch individual events. However, it seems there is no way to create irregular fields, and I can't reach camembert if I use fields rectangular for different parts of the chart (such as it's going to tear the pie! ).

  Any suggestions?

  BTW I develop for BB OS 6.0 (Blackberry Torch).

  The word dreaded no programmer doesn't want to hear: math. You'll just have to figure out where all of your divisions are based off of their percentages, determine where the touch and then discover what segment is in.

  In fact, I don't think it's going to be too bad, just refresh you on geometry.

• Is it possible to toggle the setting panel open a closure with a combination of keys?

  Is it possible to toggle the setting panel open a closure with a combination of keys, or y at - it a script that can do?

  

  Try this instead:

  Go to Edit/shortcuts...

  Then where it says "shortcuts to: ', pull down the menu drop down and select"request Menus.

  Then expand the category of 'Window' and from there to the bottom, you will find 'Properties' - give a keyboard shortcut.

  This might work

• Is widgets of composition - possible to have different sizes/heights for each container?

  Hi - I am currently a mobile version of our site of Muse and I wonder if it is possible to have different containers of sizes for each area of the trigger. I use the widget of the COMPOSITION of the TOOLTIP.

  Each container of the tooltip basically has an area of text in there with some information. The container of the tooltip is always the same size as the largest container in the composition of ToolTip widget.

  So, for example, I have a container of the ToolTip that has only a a text box with a few lines of text. A different ToolTip container has a text box with a few paragraphs.

  What I see is the length of the default container the size of a container with 2 paragraphs. Empty the container with the text box with a few lines of text has a vast space underneath, and I can't resize it to look any good.

  The only option is to fill the space with something like an image or another, which is less than satisfactory solution.

  
  

  See you soon,.

  Marty

  Yes you can, just go to the setting of the composition and change the position of straggling.

• How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

  I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

  For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

  I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

  This is a suggestion, but I would like it to be considered.

  Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

  Thank you.

• It is possible to crop a part?

  I have a graph I want to crop into 4 different parts.  I could mention in Illustrator and separate items, but I was hoping there was a way to reframe the AE first issues.  Research into it, I see something on the use of a "region of interest" tool of this kind of sounds like what I want to do but I can't find anything that explains how this is not used, I can understand even when

  It is called masking in AE. Take a look in the files help or Start here. You use the mask tools or the pen tools to do this.

  It's really basic things. Region of interest, it's not what you want.