Is it possible to type ApplicationMessage conflict?

Similar Questions

• Type AutomationParameter conflict

  Hi guys,.

  I tried to use a model of station customized with a movie file, but when I open it I have an error Code AutomationParameter Type of conflict:-17329 Source: TSAPI as shown in the attached photo. I can usually solve other conflicts of type making just the 2 Types are the same in both sequences however, in this case, I don't really see where the types are able to compare them. Any help would be appreciated

  Concerning

  Kewal

  I think I've solved the problem. By loading the sequence with the conflict of type and then by opening the Type Palette, the Palette of Type actually shows a (*) in the title, showing that it has changed but it doesn't automatically ask to be saved when closing TestStand, so you must save it manually. And this seems to solve the problem.

  Concerning

  Kewal

• Is it possible to type a letter on Windows Vista, to be printed?

  Is it possible to type a letter on Windows Vista, to be printed?

  We play, 25 October 2012 21:36:20 + 0000, JeannotChenard wrote:

  Is it possible to type a letter on Windows Vista, to be printed?

  Sure. What version of Windows you are using few questions. You need a
  program of processing and most of them can operate under any
  version of Windows.

  The best-known word processor is Microsoft Word, which can
  be purchased either by itself or as part of Microsoft Office.

  My favorite is WordPerfect, which is less expensive than
  Word.

  You can also use one of the free, such as word processing programs
  LibreOffice (http://www.libreoffice.org/). It's supposed to be a clone of
  Microsoft Word, and although I don't use it personally, I hear him very
  good things about it from others.

  And another choice, I mention with reservations. WordPad comes
  with Windows. If your formatting etc needs are very modest,
  You can use it. But note that WordPad is really more a glorified
  as a real word processor text editor and has very few options.
  If you do a lot of processing in the future, you should
  you get a real word processor. I advise you to WordPerfect, if you
  are ready to buy one or LibreOffice if you want a free.

  Ken Blake, Microsoft MVP

• maximum ram for hp mini 210 1175nr possible. There are conflicting messages: is it1gb or 2 GB?

  HP mini 210 1175NR w / Win7 (32 bit) starter.  No hardware changes.

  I am interested in increase of the stock 1 GB RAM to 2 GB.  The problem is there seems to be a lot of conflicting information about the Max RAM that this PC can handle.  Site Web of HPs indicates she has a maximum of 1 GB.  There are countless articles on other sites, claiming that it may be higher.  I know that Windows 7 Starter will recognize up to 2 GB, so that shouldn't be the ceiling?  So what - this: 1 or 2?

  Hello:

  2 GB is the maximum.

  See Chapter 1, page 2 of the memorandum on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02241579.PDF

  This can be confirmed by reading the card processor directly from Intel where the 2 GB of memory is shown as being supported.

  http://ark.intel.com/products/49491/Intel-Atom-processor-N455-(512K-Cache-1_66-GHz)

  Paul

• error: conflicting types for 'myFunctionOne '.

  Hello

  The help page of LabWindows/CVI 2013 for C language Extensions seems to show the functions of overloading is supported in C99 extensions:

  ' Function overloading in C | Yes '.

  The same thing in the table in the following link:

  http://digital.NI.com/public.nsf/allkb/73AEAD30C8AF681A86257BBB0054A26B

  I tried to compile a source file with the following definitions of the function overloaded with C99 extensions enabled in the compilation Options:

  void myFunctionOne (double d) {}
  printf ("value = %f\n", d ");
  }

  void myFunctionOne (int d) {}
  printf ("value = %d\n", d ");
  }

  and I get the error:

  "types of conflict for"myFunctionOne"

  Overloading of functions is based really, and if so, how you allow it?

  Thank you
  Mark B.

  Hello Mark,

  You must add __attribute__ ((overloadable)) in the definitions of the functions you want to overload.

  Sub __attribute__ ((overloadable)) myFunctionOne (double d) {}
  
    printf ("value = %f\n", d ");
  
  }
  
  __attribute__ ((overloadable)) void myFunctionOne (int d) {}
  
    printf ("value = %d\n", d ");
  
  }

  You can see an example of extensions clang here.

  Constantin

• Resolve the conflict of data type of TestStand pragmatically in CVI

  Hello

  I'm porting a UI for the 2010 ICB/TestStand.  My problem with the badly planned spread data types defined custom.  While I can handle the MyTypes.ini and StationGlobals definitions, sequences that we are loading are originally the dialog box 'Type to the Type of conflict'.  The sequences that are loading have been created in previous versions of TestStand (3.1 and 4.0 for the most part).  The main reason why a 'conflict' is detected because the data types of the sequences can either have different indicators (for example, "modified") or updated dates.  The structure of the types are ALWAYS the same, so there is no danger by choosing the "wrong" data type  However, given that the "currently loaded" Type is one that "must" always be used, it would be great if the resolution could be resolved so that the operator never has to see the dialog box.  In our environment of manufacturing of these dialog boxes are considered errors.

  There are hundreds of files in sequence that could be affected.  The process to go through each of them individually and setting data types would be impractical (really, out of the question).

  I use TSUI_ApplicationMgrOpenSequenceFile() to open the sequence and can not find a way to settle the conflict resolution to automatically choose the "currently loaded.  Please let me know if there is a way to do it, and if so, provide an example.  Any other suggestions you might have would be welcome.

  Thank you

  JF

  (Either by the way - I meant "programmatically", not "pragmatic" in the subject heading)

  I tried your suggestion and I still get the dialog box when

• type definition and reference

  Hello

  When I look at the 'Use' in the opinion of Types column, I am fair to assume that the first location given for a type whose type is defined, all the others where it is referenced?

  Example:

  Use of Version of Type name

  OMS_StdQueueInput container, Type definition 0.0.0.4 OMS_Types.ini; OMS_LocalTypes.ini; OMSStart.seq no comment

  So here I guess, the type OMS_StdQueueInput is defined in OMS_Types.ini and used/referenced in OMS_LocalTypes.ini and OMSStart.seq. Is this correct?

  Kind regards

  Peter

  INI file do you mean a Palette Type TestStand file?

  A new feature has been added to TestStand (4.1, I think that Yes do it) which allows control of automatic conflict resolution cases (choose the most recent version of a type in silence). The setting is located under the tab file from the dialog box Options of Station and is called "allow automatic Type Conflict Resolution." In general, I recommend to change for a bit more restrictive setting 'Only if a Type Palette File a higher Version' because that will get rid of the possibility of automatic fix of conflict at the opening of two files in sequence with different versions of a type when the type does not exist in a file of type palette. But if your type will always be in a file of pallet type then the default is fine.

  First of all, some basic information.

  Type automatic conflict resolution - this occurs when a file is opened, whose type is different from the version already loaded into memory, and the auto resolution criteria is met (i.e. the station allows it, or verison of the type is marked as modified, and versions of the type as the different version numbers). In case of automatic fix TestStand automatically selects the version of the type with the higher version number.

  I would like to know if you want to explain otherwise.

  What I recommend for the management of the types:

  (1) create a palette file type for your standard types. Make sure all efforts and development systems are using the / load this file type of pallet. If you need more information on how to do it please let us know.

  (2) control updates to these types by using a source code control system to control the update of the files palette type. Ideally, one person should be modifying a palette file type at a time. Source code control systems can be used to enforce this.

  (3) let your developers know that they must only edit types in the type palette files and not in the files of each sequence.

  (4) try to make any changes to your types and substep code backward compatible so that the old sequences will continue to work with newer versions of the types. If you break backward compatibility, consider instead to create a new type and use the new type in the future, but the old guy to let backwards compatibility (you can use flags to hide the old version of the types in the Insert menu, if necessary).

  If you are using a palette file type in this way, I think you'll get something close to what you're asking. The default setting for "allow automatic Type Conflict Resolution ', if all your systems of TestStand charge your standard type palette files then you will get the version in the type palette file or your will get a dialogue of the type of conflict if the version in the movie file is more recent. There will be no possibility of silently using one version other than the one in the type palette file. Is it enough for your needs, or you are looking for something different. If you are looking for something different, please let us know the specific behavior that you need.

  Hope this helps,

  -Doug

• File/property permissions is messed up (just a file type, I know)

  Hello.

  I've been on send it a file by e-mail, but when opened file that contains, some files are invisible.  In fact all the files in that folder, that I edited recently, are invisible through Windows Explorer and is visible to FL Studio, the application that creates / uses of this type of file (and these files have a lock on them gold).
  This seems to have started around the same time I had to reinstall Windows, but I don't know if they are related.  Another possibility: the type of file that has touched (file .flp for FL Studio music making app), installation, last of the latest version of FL Studio, it asks if you want the application to be available for all users or current user. This time on a whim, I chose "all users" (normally I do 'current user').  Maybe this caused a conflict?
  I asked someone about it and they gave me a link to a possible solution [http://www.howtogeek.com/howto/17117/remove-the-lock-icon-from-a-folder-in-windows-7/], but it has suggested a new user (but I already have user).  Overall, it seems that I have more things listed in "group or user names: ' under the Security tab that I had (not that I really know):
  CREATOR OWNER
  SYSTEM
  Administrators (PC name\Administrators)
  User (PC name\Users)
  TrustedInstaller
  Should I have many groups/users?  When you click on edit to the above list, all have full control, except for CREATOR OWNER (only special permissions is ticked) and TrustedInstaller (which only display the contents of the folder and special permissions checked).  If I try to make changes, they seem not just to 'take' or I get an error popup that says I can't do that.  Fortunately, I have created a restore point before this misadventure.
  Trying to figure things out, the record (which includes the invisible files) repeatedly returns to read-only, even though I still haven't the folder or its contents, read-only.
  It's really frustrating.   I need to get a file to someone; I understand the need for security, but when it gets in the way (especially when I completely trust anyone with access to this computer), the work can grind stop unnecessarily.
  Please someone help, a solution that does not require me reinstall Windows!  :-)
  I use Microsoft Security Essentials (circulate regularly, auto-update)
  Thank you!
  Andy

  Problem solved - files moved and have been in a different place.

• HP Elitebook 8470p: possible upgrade to Intel AC 7260 802.11ac wireless? HP Elitebook 8470p

  I want to improve the wireless card on the 8470 p, and I read that HP has whitelisted some Wi - Fi cards, so only those approved by HP may really work

  Now the 8470p is released in 2010 / 2011 (?) - some time then anyway and 802.11ac wasn't really one thing in 2011 (at least not outside the offices of the IEEE)

  I found this on the interwebs:

  http://Forum.techinferno.com/HP-business-class-notebooks/6691-installing-wireless-card-Intel-AC-7260...

  And this person implies that it would be possible to type in a 802.11ac wireless adapter and it would only work? Thought ID ask the official HP forums, because it's a HP product!

  Thank you

  EDIT: The Solution is wrong. See jlong pos

  No AC adapters will not work. Only wifi cards that are on the whitelist, that is those in the manual and only ref HP versions of those.

  The Intel cards are limited to the Ref. HP versions contrary to the statements of the Wicki guy. There are a few options of 5 GHz, but not 802.11ac cards. Sometimes the cards that are not in the manual will work somehow and I know there is a 7260N that many people confuse for the 7260ac card. I know that the 7260AC will NOT work because we had messages before people here who have tried, but it would not shock me if a 7260N card would work. Cannot promise, however. It is largely a guessing game since the actual whitelist itself has never been made public.

• Deployment w / Type custom (CommonResults)

  OK, first of all, I admit I'm not an expert when it comes to Types or even their deployment... where the issue. I'm looking for a recommended way to handle the situation I have.

  Situation: I have test sequences with a change to CommonResults. We put a Boolean variable to 'IncludeInProductionLog '. I expect to see this property on all steps in the sequence. I have the sequence initially registered in TS 4.1 / LV 8.6 and now I'm upgraded to TS 2013 SP1 / LV 2013 SP1. It seems that, before developers (not me) had replaced the pallets of Type on our development machine as this type was standard on the computer. Now, when I open it on a new machine, I get a Type conflict (no surprise here). I have the option to use the Type of the sequence (the one that I want) or use the Type currently loaded into memory (by default installed w / TS).

  So I select load the Type from the file in the sequence. Cool, looks good, but my ParallelModel.seq / NI_DatabaseTypes.ini / NI_FlowControl.ini /.../NI_Types.ini all have the sign (*) next to them as if they have been updated and should be saved. Of course, I get that I changed the types in memory and therefore these pallets Type / ProcessModel everyone thinks that they have been updated. More on that later.

  I plan on deployment (Deployment TestStand) my sequence of about 10 machines, all new w / TS new installs. I don't want to go through and update all the pallets of Type / type of conflict dialog boxes that come with this. I'm looking for how to deploy either my Type Palletes, save this CommonResults in MyTypes.ini or something that I can just deploy the CommonResult Type updated and I can't go through all the headaches of type conflicts.

  I tried the things:

  I've been good analysis that the documentation (I try to RTFM when I can) and he talks about versioning of Types and have it select the latest version. Updated my type of sequence to 5.2.0.0 (old version was 5.1.0.0) but I still get the same type conflict.

  I know that the Type of TestStand differ is there, but once again, without really understanding what I'm doing and eager to have this "get" just with my deployment, I'm looking for other options.

  What I need:

  It is quite simple, just do not have the conflicts of Type, don't want the user to have to save all Types or ProcessModel and I don't care even to maintain the types of origin on these systems. I'm happy to just replace. Just want to make sure I'm on the subject with "best practices" in mind.

  Sorry for the long post... any recommendations would be useful. Thanks in advance!

  I recommend that you update all files of type palette to have the latest version of your type of CommonResults and re-record the (you may need to run teststand "as Administrator" when you do this because the files are in the directory program files and therefore are not writable by default on newer operating systems). You must then make sure you install those in the \Components\TypePalettes directory on your target computers, overwriting those installed there by default. Which will get rid of type conflicts, you see.

  When you open files from existing sequence they will be marked as modified if they were not already using your version of CommonResults, but you don't necessarily have to resave all since they get converted back to use your CommonResults type whenever they are responsible since the type is in the type palette files, but if you want to get rid of the brand of change you need to re-register the. You can use the tool "Sequence update files... "in the sequence editor to re-record them all at once.

  In the future, you can consider using the 'Other results' feature more recent, or adding an attribute to the result object of a step use CommonResults instead. They have not the same problems with the type of conflict and change file because they have now a custom data type used by all the steps.

  Hope this helps,

  -Doug

• Getting IP address conflict

  Hi all
  Recently we are facing a strange problem, we have about 5 windows server 2003 and about 50 users windows xp SP3 all our servers get IP address conflict error at the same time, and we need to disable and enable the network card, sometimes even need to restart servers, its every 7 or 8 hours past what we did :

  We have checked all our wireless routers their DHCP is Disable. (If even the DHCP is enable the DHCP range is totally different with the release of the DHCP range for computer) 1-100 IPs are excluded for servers, printers and etc... customers leave 101
  We have disabled the DHCP server and connect a computer to the network and wait for intellectual property. (We wanted to make sure that there are no other DHCP running on the network service, we do not have the IP).
  All our customers get automatically the IP person uses the static IP address, they are limited to change the setting of the intellectual property. (if someone IP static value as possible 5 servers download conflict at the same time, she would be in conflict with a server not all).
  We have changed the NIC for servers and even uninstall the driver in case if something wrong with the LAN card but the same problem exists.
  All servers are updated with the latest Anti virus and I look on the internet about the possibility of any virus, bringing to this conflict, no results.
  I tried to see the same log, there is no log for IP address conflict and sometimes my customers also complain that they are getting the error of conflict but they receive only notification noting that most everything works normal for them
  its really make me mad don't know how to solve when the conflict get server all of them stop working sometimes I just OK the error all of this hard work. I don't really know what to do.
  Do you have an idea what could be the problem?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information is useful.

• Not possible to write space characters in the fields 'Subject and Message' [Send & Track]

  • Acrobat Acrobat Pro DC 2015.016.20039
  • OS X El Capitán 10.11.4

  Problem since the last update.

  1. File > Send file > Send and track...
  2. Choose "Send Invitations personalized (with track)"
  3. Go to the fields 'subject and Message.

  Problem: I can write a text in these two areas, but it is not possible to type any space character. The only solution I know is to copy a space character outside of Acrobat, and paste it in via the clip board.

  Does anyone know how to recover the ability to write normal.

  The keyboard is ok, no problem.

  Mrs. Willi Adelberger

  Hey Willi,

  Today we released a hotfix that resolves this problem on space/line jump does not work in the transmission and the railway. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• Where can I get a complete list of all types of events (tasks and events) vSphere

  Hi all

  I am looking for a way to get easily all types of events (events and tasks) that you normally see in the client vSphere for vCenter / ESX host.

  What I would like is the name of actual event/task for all types that are available. I know that there is the event manager in the CROWD that could be used to query for specific events, but it would be possible to get all the possible return types?

  Otherwise, if there is a document that lists all of them could someone tell me, who would also help!

  Thank you very much

  Sean

  Yes, that is all documented in the vSphere API reference Guide

  Tasks - http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc%2Fvim.Task.html

  Events - http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc%2Fvim.event.Event.html

• Is it possible to change the settings in "help > system information?

  Is it possible to change the settings of Photoshop by clicking Help, and then click system information? Since there is the possibility of type and the OK button, I just started wondering.

  Any help > System Info done is to your specifications so that you can copy and paste into the forums for troubleshooting purposes.

  You can choose what to highlight and copy, but it changes nothing in your system as editing a configuration file.

• Vista keeps close unexpectedly.

  original title: Vista keeps stop unexpectedly. Have reinstalled Vista, checked for viruses and malware/spyware and reinstall the memory, still no luck.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: have reinstalled Vista, checked for virus and malware/spyware and reinstall the memory, still no luck

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you reinstalled Vista, chances are good, that it is not a software but a hardware problem.  It could be overheating (any part of the computer is too hot to the touch for a long time) caused by the fan doesn't work does not correctly or clogged inlet and/or exhaust - you should check it and clean if it's a problem with a can air or possibly replacement fan or power set.  It could be also problems with the hard drive, motherboard, processor (too much, it can overheat and they sell small fans for them which can sometimes fix this), perhaps, but probably not RAM or even another device that causes some type of conflict - perhaps even something as simple as a bad connection tight so check connections to make sure that they are all well know a lot about.  The following can help you diagnose a hardware problem:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  If you have spare parts that work from another computer trying to Exchange out them to see if you can identify the source of the problem (but be sure to check that they are compatible and that you install the appropriate drivers for them - otherwise you may cause more damage that may already exist).

  If this does not help or if this level of troubleshooting is out of your reach (these skills require experience, education, or not many people are trained and you do not want to cause any damage by guessing or trying things where you don't know what you're doing), then I recommend you take the system at a reputable computer repair workshop (NO Geek Squad or anywhere like that but one true professional) or return it to the manufacturer for repair, repair or replacement.  Compare costs, guarantees, reputations, parts availability, timing, effort required on your part, and any other factor consider you important and make your choice.  I recommend a full backup before sending or bringing as there is a good chance the drive will be wiped clean during their troubleshooting process.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.