Is not properly sleep

Hi all

I recently bought a 4085 CTO W500 laptop and abandoned the OS Vista 32-bit to 64-bit. Now I have problems with the sleep function.

Whenever I put the computer in sleep (by any method - Fn + F4, close the lid, by clicking on the start menu button), he would do, the indicator light turns on as well - for a second and then automatically be reactivated. The computer would then be in the locked mode, but with the screen turned off (maybe put it in hibernation? "I don't know too much), and if I don't do anything to it for awhile, then he did enter mode 'sleep' for good (the amount of time I had set for it under Power Manager).

He did do that when he was in 32 - bit, but now it does, and I have no idea why. Any suggestions would be greatly appreciated! It is quite annoying when I have to wait at least 10 minutes for the computer to sleep, instead of every time I said it too.

Thanks again!

P.S. I'm not exactly a computer savvy person, so I have not configured really nothing advanced, either.


Ah, never mind. I thought about it.

Apparently, I can't put my computer to sleep under the "Energy Saving" option in graphics switching. It was a very unexpected way to solve it - or maybe not, but it was for a n00b such as I have.

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite P30 Pro: Will not properly sleep mode


    I do not normally use the standby feature, but it hibernates.
    Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
    Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.

    The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
    I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!

    Any help?
    Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.

    Thank you

    PS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)


    If I understand you right, the laptop is on standby and it s is always connected to the local network.

    Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.

    Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.

  • Safari Web Clip does not properly

    Hello everyone

    I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

    Is this some sort of bug or can I fix it myself?

    Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

    Dashboard widgets in general, are an old technology that has not been updated in many years.

  • IPhone 6 does not properly?

    Lately my Iphone (6) was not properly.

    It it constantly restarts randomly, it is not allow me on apps (they crash). If I get on its connect outside and very slow. The screen is most of the time of freezing and glitching. It's really slow, sometimes too the point that I have to wait about 10 seconds for the lock screen comes on. Also when I open the texts, it does not allow me too click anywhere, so the only way I can answer is too open the app about twenty times or drag the text down and answer.

    It has been like that since then, time I plugged my charger of friends, next to the issue of texting (I don't know if this has nothing do with it). I tried to manually reboot several times, and I don't know what else to do. I plan to do a complete reset.

    Is anyone know a cause or a possible way to fix this?

    Try these...

    Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

    If this does not help, you may need to restore your iPhone:

    If your backup in iTunes, make sure that it is an encrypted backup.

    The next step would be to restore like New.

  • iPhone upgrade of the navigation software now works not properly

    iPhone 5

    New IOS software updated and now the navigation screen not working not properly

    is your site on?

  • Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected


    I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

    Thanks in advance


    Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

  • Toshiba 47L7453DG - CEC does not properly using exernal amplifier

    I bought Toshiba 47L 7453 a few days ago.

    It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

    My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

    The wire connection is HDMI 1.4 certified.
    Maybe the problem is with the firmware of the TV.

    Maybe someone had the same problem.

    Any suggestion?

    Thank you


    From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

    Manual, you will find some important notes:

    _Page: 11_
    + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
    + If several devices are connected, the HDMI CEC control function may not work correctly. +

    _Page: 86 - 87_
    + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
    + On, also allocated to individual features will be activated. +
    + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
    + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

  • Satellite A300-1HP is not in sleep mode after 30 minutes inactivity

    Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
    Windows settings are OK (I'm an experienced user).
    He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,

    Any idea?


    Hello, Norbert

    Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
    I tested it with all three power plans. Have you done the same?

    Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.

  • EQUIUM A60: graphic ATI does not properly



    Can you tell me when this message appears?
    First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
    Check this page for the driver download.

    Good bye

  • Message: Cannot perform this operation because the default mail client is not properly installed

    I get the following error message:

    Cannot perform this operation because the default mail client is not properly installed

    Could someone help me please?

    Moved from the community involvement Center


    You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.

    The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.

    Windows Live Mail is popular
    Is Thunderbird

    Windows Essentials help:

    You can access via Windows Live Mail

    Set up an email application with - Microsoft Windows Help:

    After installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.

    Web-based e-mail services can only be made the default e-mail program in these 2 cases:
    * Yahoo, with the Yahoo tool bar
    * Gmail with the installed Google toolbar


  • Error message: Shockwave, Flash Player does not properly during playback Slotomania

    Original title: shockwave flash player

    Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

    Hello Marilyn,.

    Thanks for posting your query in the Microsoft Community Forum.

    According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

    It would be useful that you can answer these questions to help you further.

    1. are you facing problems that when you play online game Slotomania?

    2. using Internet Explorer or another web browser?

    3. what version of the Windows operating system is installed on your computer?

    4. have you made a recent software or hardware changes to the system?

    If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

    The problems of games online using Internet Explorer

    It will be useful.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • fan does not properly

    Does not properly on the laptop

    Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

  • I cannot access the application "contact me" when a website, get error "Default Mail Client not properly installed."

    I cannot access the application 'contact me' when a web site and receive the answer "Default Mail Client not properly installed" instead of going on the requested site.

    How can I fix this problem?

    Separated from the:

    CrystalBall © SEZ...

    Unlike Windows XP & Vista, Windows 7 does not include a default email Client. [What were thinking?]

    You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.


    In these forums, you will find support for Windows Live Mail:

  • Setup.exe does not properly

    I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

    Repeat: You need upgrades to Windows 7 not Windows updates.

    Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

  • Message: "default mail client is not properly installed.

    I deleted several programs to get more system memory. I tried to restore my system to an earlier date, that date of was not available for a restore. Then when I click on the email toolbar icon I get an error message "could not perform this operation because the default mail client is not properly installed". What should I do to restore this ability? My OS is Windows XP Professional.

    Separated from the:

    Control Panel | Add/Remove programs. Set Program Access and Defaults. Custom + down arrow | Select the option for Outlook Express. Also in Add/Remove Windows components, make sure OE is checked.

    Making OE the default e-mail client:

    For the links in the email:

    Restore OE to e-mail clients list in Internet Options

    If you have installed MS Outlook, see also #13: 



Maybe you are looking for

  • Damaged during childbirth - what to do?

    I ordered a new iPod Touch (128G) from the Apple store online - with free and custom engraving. He was released today by FedEx and packed it was damaged while the delivery guy suggested that I should open the package to see if the contents have been

  • Import icon appear when I click file - I want to import favorites.

    I want to import my favorites, but when I click on the file, the icon tax does not illuminate and unresponsive.Roger

  • Excel sheet can not be changed op OSX machines

    We received an Excel spreadsheet for tracking working hours. This Excel sheet works fine on all devices Microsoft with Office 2010-2016. When we try to use the same sheet Excel on a Mac Excel sheet can not be filled. Excel keeps saying that it is sec

  • Advertising, freezing the icons on the taskbar

    I have a laptop G7. I get this pop up telling me I need to upgrade to flash player pro. I click it off and then it freezes the icons on the taskbar. Those on the office work. I have the icon of chrome from google on this subject or I couldn't get to

  • Failed to open the street & trips after download on samsung Tablet

    Buy the full version of S & T for Samsung Galaxy Tablet. It shows 1.32 G loaded but the display of the message 'Cannot open file' help. There is a new Tablet for a truck driver for the father's day that I obviously don't know how to operate.