is Omni 120-1024 Office a touch screen PC?

Similar Questions

• Omni 120-1024-is it possible to install the firewire port via the mini connector PCI Express to spare?

  Hello, my old HP is dead and we bought the Omni all-in-one, I must have fog on the brain I never even thought to the fact that he doesn't have a firewire and I have 1 years worth of my newborn, sitting in the video camera DV tape.

  I see on the site of HPs that there ' a half-length PCI Express mini card "

  But I realize that this all-in-one is more like a laptop to the extent of the site.  Is there a map that I can buy to add firewire capabilities using this slot on the motherboard pci express?  It doesn't seem like he would have anywhere to run 'out' because there are no visible locations, but thought I'd ask.

  I'll be so sad to know that I have no way to capture the video more.

  I'm guessing that the "PCIe half mini map" slot is already occupied by the adapter 802.11 b/g/n. discover your Omni 120-1024 to the HP part surfer. Scroll almost to the bottom and look for "PC LAN card wireless (Interface) p/n 638403-001 - Flamingo, Halfmini 802.11bgn 1 x 1.

  Frank

• HP Omni 120-1024 all-in-one - I think I'll have hard disk problems, I can replace "on my own"?

  Sorry if this sounds stupid, but with the all-in-one is so compact and mysterious, I'm not confident juggling it as I used to be when I got a tour.

  This week the computer starts to work slower than snails. as something and 10 minutes later, he answers with a click. I ran the tests for the virus, but they do not somewhere through; I noticed a ton of mistakes in the event vwr posing problems SATA. I tried to run the Diagnostics and it FROZE at the SMART test.

  I'm afraid it's the hard drive, I'm still trying to diagnose. I just want to know how it is difficult for the swap on a hard drive on one of these all-in-one.

  Thanks in advance.

  BTW, this computer is only 1 year and 4 months. Looks really 'young' to a hard drive failure, I had computers in the past which lasted for years and years.

  Hello

  Unfortunately indeed resembles diving is a failure and should be replaced.

  As examples, the following hard drives would be a good choice.

  500 GB 3.5 "HDD Sata II.

  750 GB 3.5 "HDD Sata II.

  1 TB 3.5 '' Sata II hard drive.

  Best regards

  DP - K

• HP Omni 10 5600ea Tablet TOUCH SCREEN NO longer WORKS

  The touch screen of my HP Omni 10 5600ea Tablet stopped working again. A Windows 8 previous restoration and installation of the graphics driver temporarily solved the problem when it happened before, but now it's happened again and I don't want to have to restore my computer every time that happens. Please give me a permanent solution to this problem. I tried to reinstall the graphics driver and updated the bios without result.

  I hope someone can help!

  (I am lucky enough to have a bluetooth keyboard and mouse so am able to always use the tablet to post this content).

  I have no approach to email you. If you have already made a recovery and updating the BIOS the only option I can give you is to contact the phone support.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the following link to get help from your region number: phone help around the world.

• HP Envy 120: Touch screen does not show. Buttons on the front are unresponsive.

  The touch screen does not appear or appears with vertical bands of color. Power switch; WiFi; Open on the front buttons do not work. It will be printed from the computer and printed the test page. After it printed the test page, it stops and will not respond to the buttons on the front, but will always show from the computer. I unplugged and plugged back in after waiting for 30 seconds.

  If it is not under warranty take it. Buy something else.

• How to organize the order of the icons on the touch screen of the printer? (Office Jet Pro 8600)

  I use the touch screen only to scan documents. It's annoying to scroll through a series of unused icons to achieve the scan icon whenever I turn. How to reorder the icons so that the "Scan" icon is on the main home screen (on an iPhone that would be just pressed until it's mobile, but it does not work here).

  You can customize the selection and order of the icons in the Apps folder, but I can't figure out how to move the other icons. Come on HP, your intuitive user interface needs some attention

  Thank you!

  There is no option to rearrange the icons of an Officejet Pro 8600. Icons available is determined by the firmware of the printer and is immutable.

• Satellite u920t - touch screen does not work

  Since I installed MS office 2013 the touch screen feature is not available any more in the system settings.
  Who can help me?

  Best regards Jürgen

  Hi Jürgen

  Which machine do you have?
  Have you tried to remove Office and test the functionality again?

• Portege A200 - calibration touch screen

  Hello
  I tried to get a touch screen of 8 "with my 200A. There is no problem with the see etc. The problem I have is that when the system is switched between the laptop and the monitor, touch screen resets the graphics settings for laptop (1024 x 768).
  I'm turning the screen touchscreen at 800 x 600 and laptop to 1024 x 768. How set system so it will remember the settings?
  TIA
  Wayne

  Hello

  The European driver Toshiba page provides protected A200 drivers, they are placed in the archives.

  I checked this and found a posting for external monitor Service.
  I recommend that you install this.
  In addition, the laptop seems to use the internal graphics chip 852GM. It s from Intel.
  Then maybe you need to update the display driver too.

  Last but not least check if you are using the latest version of the BIOS.

  Welcome them

• A700 touch screen no longer works

  All of a sudden the touch screen on my A700 has stopped working. I tried to update the drivers (I think elo Tyco Electronics TeTouchPlus v 1.4.0 is installed). The screen takes the input during calibration, but after that the touch screen has no impact. I'm used to be able to use the touch screen to connect. Now, I can't do anything because it is not responding. Suggestions? Thank you.

  I looked in your question and found bad that you can not use such an interesting feature with your office.

  Please uninstall the Tyco Touch driver, then reboot the system after that install the driver of the keyboard, then Tyco Touch driver version 1.2.0.0

  Please download the keyboard driver of the cited web link below.

  http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_show_3284.html

  Please download the driver of Tyco Touch of the cited web link below.

  For 32-bit operating system, please follow the link of web http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_show_3283.html

  For 64-bit operating system, please follow the web link

  http://consumersupport.Lenovo.com/us/en/DriversDownloads/drivers_show_3282.html

  Best regards

  Tanuj

• Help with the touch screen!

  Hello, I hope someone could help me.  I just installed Windows 8 Professional on my TouchSmart 520-1070, and now the touchscreen does not work. I tried updating the driver, but that didn't work. I'm not computer savvy, but it does not work?

  How can I solve this problem? If anyone from HP is there, please help! Heck, if someone knows the answer, please help!

  OK... no one answered, but I guess it's ok because I've solved the problem.  You must make the updates for the office and add the extras. It is the Extras where the updated driver is for the touch screen.

• Slate touch screen deactivation 21

  I would like to know if there was a way to disable the touchscreen on the slate 21 all in one office. The evening when I watch movies or click Browse, sit of bugs on the screen and the screen moves on their landmark since the touchscreen slate 21 is optical and not capacitive. It is very irritating and at times criticism can be dangerous. So it would be a lot of help if someone know how to disable the touch screen when required.

  To be honest I have never personally tried the apps. I don't have access to a tablet that uses a mouse to test the feature for you and you will need to go with the old method of "trial and error".

  Good luck!

• Touch screen not working not not after upgrade from 8.1 to win

  I have a PC HP Envy product number X 2 C2K61UA #ABA now Win 8.1 32 bit running. After the upgrade is installed, the screen no longer meets a contact. On the other hand, the touchpad works.

  Masters,

  Welcome to the HP Forum.

  I just went through this process on my own want of X 2 and the touch screen is OK after the upgrade.

  Something that I've done that maybe makes the difference: I have day all driver sets for Windows 8.1 before the upgrade.  Pilots have been out for awhile; the drivers for the 8.1 are also compatible with Windows 8 update was possible before installing the Windows 8.1 operating system.

  I had also stripped most of my personal computer programs: I refresh the system using a customized several months back Image, which included only a relatively bare installation and installation of Microsoft Office standard packages.  I left installed HP SimplePass (I use a device of fingerprinter USB with this computer) and my photo editing software that has been designed for Windows 7 which was SO painful to install that I decided to take the risk of letting up.   Those who survived.

  The stripped upgrade Firefox and Chrome (no biggie), Flash, Kindle, various programs and the old OneDrive files the installer for Windows 8 and a couple of obsolete Broadcom drivers.

  • If you not already have, update all your drivers from the website of media from your computer.  You can always reinstall the drivers - if they have already been installed, you can select "Yes to all" and reinstall / reload the packages during the installation.  Restart the computer after installation.
  • You must run also immediately the Windows updates to 8.1 after the upgrade - there is not zillions of updates, but there are several critical fixes that you do not want to get on the system.

  Changes

  Content deleted from here about RemovedApps - it was not correct for this context.

  • If you find that the question is one of the 'lost files', structure pilot, lost 'something' - lost-at so you can get in C:\Windows.old offending data / missing.  You have 28 days from the date of the upgrade.  I'm not sure of the type of 'time bomb' built into the data - you might be able to actually prevent lost data by copying to an external drive if you really want to keep.

  I hope this helps.

  Click on the Thumbs-Up Kudos to say thank you for the help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP 1010 a 320 touchscrreen: cursor problem touch screen model 3201010a HP

  Hello

  I had a touch screen 320 HP 1010-a computer model of office. I hurt me with the departures of cursor.it movement crazy everything in a sudden.it seems that someone starts to control the other place.all open webpage start moving cursor will disappear and the cursor move still crazy. Any suggestions to fix this? Furthermore, I don't know much about computer. Thanks in advance.

  Hi @mechpilot, thanks for your help. I appreciate your help. Anyway, someone here in this forum had the same problem and he has found the solution... I applied the solution and it's been 3 days I have no problem... it's here...

  Go to the MANAGER of DEVICES

  find The DEVICES of HUMAN INTERFACE

  search for HID-compliant touch screen

  Right click and select Disable.

  Thanks for your help.

• How can I change the appearance of the touch screen on my hp

  I have a new 23tm touchscreen and the new office cannot switch 'touch screen' on the part of the screen. "My screen" and control panel do not seem to have the settings I can adjust for this. I ran the cd that came with the monitor.

  Connect the two cables - HDMI & USB

• XPS 18 - touch screen in the BIOS?

  Hello world

  Anyone know for certain if the touch screen on a tablet PC from Dell XPS 18 should work in the BIOS?

  There are buttons in the touch interface and a tactile keyboard in the BIOS, Dell support seems to indicate that the touch screen probably would not work in the BIOS but there is no windows drivers.  I thought that it was strange to have one without the other, but it only would be not the first time the options were left in a tech design.

  The tactile feature on the one we have here in the Office has stopped working and still does not work after that Dell has replaced the entire screen.  I'm hoping to make sure that we indeed have a hardware problem and not an obscure issue of Windows 8, but I don't know how to test it outside the Windows environment if it is not designed to function in the BIOS.

  Thank you.

  I thought that I would like to boot in the BIOS and try out it for you. Drum roll please... Yes! Touch works very well on all the screens of the BIOS on my own.