Is possible to System.myopstream.println

Similar Questions

• System.out.println () in the performance of blackberry

  Hello everyone.

  Can I print the messages during execution of an application from BlackBerry device? I would like to make something the link tipical System.out.println ("' you are in" ");

  I don't want messages between class and then use add (ritchtext...), etc. I want just a feeling at this moment. It is possible that in blackberry?

  Otherwise, there is another way to simulate something similar?

  Thack you.

  You can attach the debugger to the real blackberry as well.

  We use a loggerservice making:

  -DD

  -Journal newspaper of the device (EventLogger class)

  -Journal of a persistent internal newspaper

  the simplest solution would be to use http://www.blackberry.com/developers/docs/6.0.0api/net/rim/device/api/system/EventLogger.html

• Strange problem of Debug with System.out.println

  Hello

  I have an interesting question that I have not been able to solve and I reach out for more help.

  Earlier today my app stopped writing System.out.println messages in the console.

  It is not a fact that I'm not running it in debug mode, because all debugging information is still there. I see that things get focus, etc.

  But none of my system.out.println messages are written.

  Even with System.out.println ("main entry method"); on the first line of the main method does not appear.

  Is this a problem with the Simulator?

  Restart the Simulator, restart eclipse and restarted my computer, I tried the Simulator, cleaning.

  I use 8900 Blackberry Simulator.

  Any help you offer is very appretiated!

  Updated, I guess I was a bit premature in posting about me.

  After rebooting my computer again, by disabling the Simulator a few times and restart Eclipse once again, its started to work again.

  Strange strange question...

  Well, ~ FIXED ~

• How do you see the System.out.println (without using Eclipse and BlackBerry JDE)

  Hi all

  I just want to know if there is no solution to see System.out.println.

  I use neither Eclipse nor BlackBerry JDE for my development.

  I have my jar, jad files. I convert my jar file using the CAP tool. The .cod files are generated.

  I start the trainer. Now I have 2 windows: Windows Simulor and the output (see picture).

  Then I load my .cod files. But I see not all System.out.println ("...") in the output windows.

  

  How can I see these System.out.println ("...")?

  Please help me.

  Thank you all.

  Thanks for your help.

  I try your solution EventLogger.

  But I have another problem:

  My request is not a native application (it is a midlet in J2ME, not a UIApplication). Do you think that it will work with EventLogger?

  How can I make a registry for EventLogger:

  static boolean	register(long guid, String name)  Registers the name and the guid of the calling application.
  static boolean	register(long guid, String name, int viewerType)

• System.out.println () + Eclipse + Simulator

  I expected that System.out.println () would be exit in the Blackberry Simulator output Console, but I don't get anything in this window.  Y at - there a trick to getting the output here?

  Thanks in advance,

  You must attach the Simulator in debug mode. To do this simply right click on the project > Debug as > BlackBerry Simulator. That should fix the Simulator for the Eclipse JDE plugin and println (s) should now appear in the Console output for the Blackberry Simulator.

  To connect a device in debug mode, right-click on the project > Debug as > BlackBerry device. It attach the unit to the Eclipse JDE plugin and as above, println (s) should appear in the Console output for the Blackberry Simulator.

• System.out.println in the controller log

  Where can I find the exit from my System.out.println calls made in my controller?  I looked in the logs and diagnostics but did not meet my output.  When I run into JDeveloper, they are found in the built-in console OC4J tab.  So I know they work.  I can't find the on the server.

  Thank you

  Hello

  You can take a look at the tables of FND_LOG_MESSAGES.

  Please refer to the link below and configure the profile to the user level options and check.

  http://oraclemaniac.com/2012/08/15/how-to-generate-logs-for-tracing-OAF-page-errors/

  Thank you

  Sandeep

• Custom defined function and "System.out.println".

  Hello
  
  After some cdf sample looking on the web and bring them to work on my development machine, I was wondering if the many order System.out.println (...) in the java classes indeed out there messages to. I wasn't able to find them in all the log files, I was looking at, IE. or ESSBASE. JOURNAL, or the exemple.log where I was testing the functions.
  
  Someone at - it an idea where messages from System.out.println (...) Finally end and that there is a log file containing these messages.
  
  Volker

  Hello

  Try to run essbase in a command window (run it from the start menu or type essbase on windows OS) and not as a service, then you should see the output of the command in the window.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Get java & quot; System.out.println & quot; content in a CF model

  All,
  I am a newbie to CF/JAVA integration and inherited about 20 java applications that are called from a template CF. abounding in all the java code (in hundreds of places) it is System.out.println () statements. So far I have not been able to get this output to display on the web page.
  
  CF Code:
  
  < CFSET UploadName = UploadsDir & "-" & cffile.serverFile >
  < CFSET ExceptionName = UploadsDir & "-" & ExPrefix & BaseName >
  < cfobject type = 'java' name = "UploadObject" class = "UploadProgram" action = "crΘer" >
  < cfset params = ArrayNew (1) >
  < cfset params [1] = UploadName >
  < cfset params [2] = ExceptionName >
  #UploadObject.main (params) #.
  
  Excerpt from Java:
  
  System.out.println("");
  System.out.println (recCount + "entry" records);
  System.out.println (hdrCount + "header");
  System.out.println ("good" account +);
  System.out.println (errCount + "bad");
  System.out.println (ignCount + "ignored");
  System.out.println("");
  System.out.Flush ();
  
  Any help will be appreciated. Thank you!
  
  

  I have it!

  I finally understand how to redirect the output stream, then return the var. toString().

  Java:

  public static main (String [] args) String
  throws the Exception
  {
  ByteArrayOutputStream outstream = new ByteArrayOutputStream();
  PrintStream ps = new PrintStream (outstream);
  System.setOut (ps);

  If (args.length< 1="">
  {
  System.out.println ("use: java InetLoad inet_sales_spreadsheet");
  Return (outStream.ToString ());
  }
  inetLoad.run ();
  Return (outStream.ToString ());
  }

  CF:

  
  #UploadObject.main (params) #.
  

  Time for a beer.

• System.out.println)

  I have a question.
  I tend to use a lot of System.out.println () in my codes for debugging purposes.
  Now, when we deploy our code in the case of Oracle applications, what happens to these System.out.println ()?

  Hi pradeep,.

  System.out.println () does not store the output anywhere in the server.
  But as Summit says that this unnecessary code lead to performance problems.

  There is only one output and one error in the JVM. Multiple threads calling these methods must be synchronized and will potentially block. Also in production (iAS 1,0.2.2.2), STD on is not to redirect to a file and is lost.

  Prasanna-

• Possible Hijack, System get "changed" or perhaps "partially virtualized" virus strange very important situation

  I have a problem with 2 computers and its kind of a large.  Hard to know where to start so I'll keep it short, but I think it may concern even Microsoft, because it involves the use of what I believe to be false "terms of service" or small print and I knew even where the source of this problem is, but I really need help! Myself and others use laptops we bought together.  We live in a family, but laptops, a TOSHIBA and a HP/COMPAQ F700 satellite, as well as what I call a wireless router belong to the USA! We are connected through this wireless device, a PRISM which is perhaps a bit older, but of course seems to work, it is plugged into a modem cable motorola belonging to someone else in the House.  To make things moving along, he came to our attention that A: our systems periodically change without our permission, by that I mean that the toshiba that was purchased at walmart brand new, came with an Intel Celeron, and I think THAT the wireless card IS an atheros brand.  I KNOW that was the case with the Compaq regarding the wireless adapter, and Compaq was bought at a rent to own store and came with a 1 GB ram AMD processor.  For some reason, we are under some form of control Admin, and our system is changing periodically on BOTH computers to say his family chipset intel and our wireless adapters will go to realtek USB 2.0, once again on BOTH computers.  When this happens, our user accounts admin, that we had as an administrator user accounts AND I have unlocked the hidden via the cmd prompt and hold SHIFT + ENTER thing, will be signed in some way limit our ability to do things.  LAST FEW DETAILS, I promise you: the so-called matrix memory of intel as magically appeared with software RAID of surveillance and we saw our event logs, which we prob didn't know existed, being transferred by a remote user, and we have never consulted the remote adjustment, except in order to turn them off, as well as file sharing options.  However they continue to change when this happens.  Yesterday, to finish that, I found strange things after doing a thing of complete system repair, not for the first time, this time on the compaq.  After the repair, which seemed fine at first, I was embarrassed to find a few shortcuts readme present in the recently amended on the start menu folder.  I followed them to the folder locations that led me to the prog. files, THE SIMS 2, and various subfolders with S.W.R. claiming to be from MICROSOFT and don't mention any particular O.S. except with reference to .NET and some virtualization programs that we noticed the menu running task.  OH, I shouldn't forget that with the processor changes in both pc, THEY BOTH now say that they ar x 86 client or PC workstation and a recent attempt on the repair of the system or pressing f8 on the toshiba somehow led me to a weird command prompt which began with X : ??  I'm prob a few things set aside even if it is really long, but the SIMS 2 folder is very disturbing because a person who lives here once gave us a CD on an old computer that has not been used for at least 3 years and we have certainly not installed this game WE NEITHER of these new computers.  I SUSPECT SOME things but don't know what to do.  I TRIED to get our product off the coast of the TOSHIBA key but was said previously by a repairman it seems to have BEEN DELETED!  The records in question, according to me, are always on both pc and we executed the software suggested, including microsoft security databases, s.s.and destroy, and the malewarebytes thing, as well as to have a repair shop gives us some tips. They said several things, like the toshiba tried to boot from the drive cd/DVD, then boot pxe or something and someone had changed the wake on lan option, and maybe other things I do not remember.  OK SORRY FOR ALL this THAT REALLY, but I wanted to make sure that I gave as much information as possible because we never wanted our PC clone, virtualized, or something like that, whatever realtek usb 2.0 is, it's another icon of the wireless connection in the tray on the lower right AND THE COMPAQ is REMAINED CONNECTED WITH the off switch wireless?  Help!

  Thank you for your gracious reply. It certainly sounds to me like your computers are compromised. As I said, the only way to fix now is to restore as long as the plant once more after you back up your data and then set them up by the suggestions below. It costs you nothing but time. I'll also give you my general information on the configuration of the network wireless safely. Unfortunately, you must have control of the wireless router to do this. If you do not, then consider doing your own Internet connection and wireless router. Addition to the steps of General safety below, make sure that file/printer sharing is DISABLED.
  
  The result of all this is to keep on the front of your mind is that security, physical access to a machine trumps all. If you do not trust the people with whom you live and/or people who visit them, you have to keep the computer with you or in a locked environment that no one else can enter. And of course the locks can be chosen. Or find the best people to live with. I understand that this is not possible in your real world, but I'm telling you all the options.

  Computer security - any computer running an operating system is accessible by a person with 1) physical access; (2) time; (3) jurisdiction; (4) tools of. There are a few things you can do to make it a little more difficult but:

  1. define a password in the BIOS that must be entered before starting the operating system. Also to set the supervisor password in the BIOS so the BIOS configuration cannot be entered without it.

  2. starting at the BIOS, change the order of boot to hard drive first.

  3. set strong passwords on all accounts, including the built-in XP administrator account (it is disabled by default in Vista).

  4. If you leave your own account connected, use Windows key + L to lock the computer (or set the screen/power economy saver) when you step away from the computer and require a password to use.

  5. do the other accounts of users limited in XP Home, regular user accounts in XP Pro. All users must be on a Standard account in Vista with an administrator account (called something like 'Tech' or 'CompAdmin') only used for purposes of elevation.

  6. If more than one person uses the computer user set permissions/restrictions:

  If you have XP/Vista/Windows 7 Home, you don't have the built-in ability to create fine-grained limits. In XP and Vista, you can use the Security Console or MVP Doug Knox or the program MS SteadyState to set restrictions as you wish. SteadyState now supports Vista but not Windows 7. Mr. Knox security console may still work in Win7.

  http://www.dougknox.com
  http://www.Microsoft.com/Windows/products/winfamily/SharedAccess/default.mspx
  Information about SteadyState - http://aumha.net/viewtopic.php?t=27570
  SteadyState support - http://social.microsoft.com/forums/en-US/windowssteadystate/threads/
  SteadyState How - to (not supported in Windows 7 still) - http://www.howtogeek.com/howto/6520/windows-steadystate/

  Please understand that these are technical answers to what is essentially a technical problem and there are ways around these precautions. It is a problem of family / interpersonal which cannot be solved by technical means.

  Establishing a safe wireless router - have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the password by default because everyone knows the default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing.

  If you want to develop me on this or have any other questions, feel free to ask. MS - MVP - Elephant Boy computers - don't panic!

• Internet Explorer cannot display the Web page - trying to restore as soon as possible a system restore point

  I get Internet Explorer cannot display the webpage message on my cell phone.

  I can get my desktop to connect to the internet, so it is not an ISP issue.  The laptop can see the router so it's not the question.

  I ran the network diagnostic and that did nothing.  I call my ISP helpdesk and they said it was a known issue with Vista after last update.  Therefore, they suggested that I tried to do a system restore to an earlier point.

  I tried to do this, but the system comes back and says that he did not work properly and gives an error unspecified as to why it did not work.

  Was the ISP Helpdesk right what I try next?

  Thank you

  Mark

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• PC is not always start, sometimes freezes at startup of microsoft moving display bar. At the start, hit TAB main screen shows no primary master or slave readers only sata 1 + 2. Possibly starting system and work well. (but don't see cd/dvd drive)

  tried to repair by using external cd drive but fails to completely load the system.

  Looks more like a hardware problem, not software (Windows). You can solve yourself or take the machine to a competent local professional. Do not use a type of BigComputerStore/GeekSquad of the place.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• System.out.println (significantly) slows an application?

  I couldn't find any other posts about this, but I've always wondered to this topic.  Of course if you have the debug window open and print much info, it certainly slows down due to the scrolling in the IDE.  However, it affects the application once it is on the device and is not being debugged via USB?

  The guys take off your println when you compress your code for immediate release?

  From my experience, this output does not slow down the program significantly when running on the device. I think the BONE to eat out if there is no connection of USB debugging.

  That said, we take 'more' these lines for a production version.

• Accidentally deleted a dynamic link library (DLL) file and the need to replace one possibly other system files - what is the best method?

  I did a system restore to a point before that my main user account has been established.  I had to set up a new user, and then it was suggested that to copy all the data of the user "existing" to the newly created user.  When I did this it's not well at all and some DLL files have been corrupted or deleted or not connecting correctly to the user of your choice.  I actually then did a restore of the system to the last restore point.  However, given that SR does not change the data, I was stuck with the wrong DLL and other system files.  I thought I had stupid test because I had backed up data.  I tried to restore to an earlier point (using Windows backup and restore).  Unfortunately the restore will not work and I get the following error: "a systematic failure of the initialization of the Dynamic Link Library (DLL).  I need to repair or replace the corrupt to get the system back and then protected files again.  I'd appreciate any help!

  Thank you

  In the case that he is a protected system file, you can check if you can always run the System File Checker

  http://support.Microsoft.com/kb/929833

  You can boot from a system repair disc to retrieve an image from the previous system that you have made.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

• println method static of System.out?

  In Lesson 1-5, the System.out::println is an example of a reference to a static method, (~ 5 min)

  But it seems to me that println is a non-static method of PrintStream (PrintStream (Java Platform SE 8) (System.out is an instance of PrintStream))

  I'm wrong or have I missed something?

  You are right; println is not a static method, whereas System.out is a static variable, which may be where the confusion arises. I posted a similar request on this a few days ago. You can hear some hesitancy in the audio at that point, where I suspect an element of doubt has crept in Simon's mind as it has been described.

  Another example would use something like the whole parseInt method, as I suggested to my request.

  David