Is TAPI service, necessary?

Similar Questions

• Warranty service necessary for my thinkpad keyboard. Who should I call? I have a protection plan.

  I have a Lenovo plan protection.  A key broke on the keyboard.

  Thank you

  Randy

  Welcome to the forum!  You can find the phone number you need in this list:

  ThinkPad Support Center Worldwide phone list

  They will probably deliver just a new keyboard for you.  When they arrive, go to this link to find a video showing you how to replace:

  Matrices of film - laptops

  And this link for the hardware Maintenance Manual:

  Hardware Maintenance Manual index - ThinkPad

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• ThinPro with VMware View USB Redirection

  Hi all:

  I'm trying to configure my workstation (t620 ThinPro 5.1 running) to start required services necessary for USB with VMware View forwarding at startup.  I tried to add the command to /etc/rc.local and created my own init.d script, but none of these options automatically launch services.  Run manually /etc/rc.local and the custom init.d script launches the services successfully.

  Has someone managed to get the necessary USB redirection services running at the start?  Any guidance is appreciated.

  Thank you.

  Solved my problem... changed under USB Manager Remote Protocol of VMware View.  Updated this setting caused VMware services to run at startup.

• 2230-N-Intel wifi adapter problem. stops on the map

  I just bought a laptop HP 17-j029nr.  He has a wifi card intel proset N-2230.  I have already returned your laptop under the return policy of 3 weeks for the same problem.  I didn't know what was wrong, then I discovered that the issue on the last day I could return it, so that seemed to be the best course of action.  The new laptop began to have much faster than the previous issue.

  The problem seems to not have a link with the windows updates, but not spend 8 to 8.1.

  In the beginning, everything is normal.  Good solid connection on my network for this device and all my devices.  Then, I lose the internet connection.  On the notifacation of wifi, there is a!, open it and it only shows my network, and it said limited.  I can ping all other computers on my network or my gateway, it seems that there is not any connection at all.  If I disconnect, then says no available networks.  A reboot will get me back online.

  Everything's fine again for 10 minutes up to 2 hours.  Then he repeats, said I have a metered, but I have no connection, and I have to reboot for it to come alive.

  A google search reveals that this is not a problem rare, nor specific to HP laptops.  He also had a decent knowledge base of solutions I've tried, all to nothing does not.

  I tried a few different versions of the driver.  First, I tried the latest version of the driver.  Then I tried all the drivers that were made for windows 8.1 64-bit.  I came across an ad that suggested using the Intel PROSet/Wireless WiFI connection utility.  I defy anyone to get this application installed right the first time.  My limited knowledge of windows 8.1, my networks are managed by this application.  The only reason why I believe that it is because it runs in my sandbox, and if I right click on it, it gives me the possibility to 'use windows to manage wifi"yet, my windows wifi Manager runs as well.  I can't understand how to disable wifi management service without disabling other services necessary to use the card.  So, Yes, I have something not configured correctly, but the behavior I get is the same.  After some time, whatever it is, makes my life hell, continues to occur.

  Any thoughts on why this is happening?

  Being a miniminalist, I try to remove all the junkware that comes with the computer.  One of the things that I removed has some star power demand.  He had the blue background with the White Star, the standard "Energy Star Rated" sticker on a device, you will see.  A quick search online doesn't have reviel a lot on the application, but immediately got me into the hell of Googling turning all kinds of results I don't care at all.  So I removed the program.

  Earlier I was in the properties of the device and I noticed the power management tab and behold, it has been verified to allow the computer to turn off the device to save power.  I don't know if this is the solution, but at least it's something.  I will update, and I promise with something better than, "nevermind, fixed it.

  -L' sad HP user

  New adapter wifi solved the problem. Too bad HP support sucks so I have to use different elements to get the machine to work.

• Deployment of shared Variables failed

  Hello

  I can't deploy a shared variable.

  I get the following error when executing my exe.

  Initializing...
  Calculating dependencies...
  The checking for conflicts. This may take some time...
  Prepare the items for download. This may take some time...
  My computer deployment
  Deployment deployment failed shared Variables.lvlib\\192.168.1.109\Shared Variables (error:-1967362042, operating system and Network Services: (Hex 0x8ABC7006) could not start service.).
  Completed with errors of deployment
  You want to run the application in any case or abandonment of execution?

  I tried to google the error code, but my search has been unsucsessful at the moment. Has anyone encountered this particular error? It would be useful if he said what service especially could not be started!

  Any help would be greatly appreciated!

  Thnaks for the research,

  Iain

  Welcome to the world of partially useful LabVIEW Error Messages (even if they usually Microsoft beat by a mile here).

  What version of LabVIEW you run?  It is the only version that has been installed on your PC?  [The reason for seeking it is me and others, have experienced the installation, say, LabVIEW 2015 on a system that has already LabVIEW 2014, something that is "legal" and should work, but during the Installation, OR HHT are stop and restart not.]  [A single Service, necessary for the operation of shared Variables, is the Variable Service NOR].

  In fact, while composing this Post, I went to my Services (because I wanted to be sure to specify the correct Service), to see that the Service is missing (again) and (again), the shared Variable engine isn't available.  Indeed, I get exactly the same error message.

  So here's how I'm going to (try to) fix.  I will go to the Panel, programs and features, National Instruments and will repair LabVIEW 2015 (32 bit).  I expect this process to take about 30 minutes (if I'm lucky) - I'll post my results here...

  Bob Schor

• Demotion of a domain controller

  HIE.

  I installed the ADDS on a production server, and it became the only domain controller in the network. Then, I realized some of the services that I was using for my accounting program not able to connect. I then decided to demote the domain controller. After entry and confirmation of the Restore Mode password I hope to return to my original administrator account, but it turns out a new was created. now the services necessary for the opening of session are no longer available and I would return to my administrator account of origin with all its settings and user profile. wanted to know if this is possible and how I can do it.

  I did this first on 2012 R2 server and 2003 server.

  your help would be greatly apprecitiated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• WinXP2 husbands freezes in a short time after he got on the computer.

  My husband was my old computer, Windows XP-2 is loaded on this subject at this time.  About 4 weeks, an update automatically which sent his computer in a failure cascade drive.  I reformat the hard disk THREE TIMES since that happened. A few minutes of him onto the computer, it freezes and must be extinguished by the surge protector.  I ran all types of diagnostic programs available, I have Mcafee and two spyware. Malware progroms has running 24 hours a day on her.  (we are a home network with DSL). I read all the forums, asked in response, and I chatted online with Tech tries to solve. Basically, nothing IS REALLY WRONG!  I would like to get him a new system with Vista on it for Christmas, then someone can PLEASE help me keep his computer until there?

  Hi djs755ma,

  Thanks for posting in the Microsoft answers Community Forums.

  Following the suggestions below would be useful to keep your computer working well.

  1. I suggest you to start your computer in safe mode and perform the boot whether if any software is causing this issue.

  2 safe mode is a diagnostic mode of windows that starts your computer with the required services necessary to start your computer.

  3. restart your computer and press F8 key continuously when the system starts and before the windows logon screen appears.

  4. you will be prompted with advanced options, select Safe mode to enter.

  After that, you perform the clean boot which is a System Configuration utility to determine if a any software causes this problem.

  1. Please read this article which talks about starting clean and how to perform,
  http://support.Microsoft.com/kb/310353

  Alternatively, you can run the Chkdsk utility that checks for bad sectors on your hard drive and fix them.

  1. open the command prompt, type chkdsk /f /r and plan the check disk for the next reboot.

  Please visit the link below for more information about this,
  http://support.Microsoft.com/kb/310747

  Hope this information helped you.

  Thank you and best regards,
  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer HPp6203 of desktop screen freezes randomly

  Original title: windows 7 freeze

  I have a high HPp6203 desktop screen freezes at random no program special time frame or action. Unable to move anything or courier. Just before that happens blue circle appears next to Messenger then it freezes. No new software has been installed. Start button / Stop button to clear. Works fine in safe mode. He had already done once before and I restored it at the earlier time and it changed but now it won't let me restore uniquement3 days before and always an error if the restoration is never completed.  Thank you Gary

  Hi G Conrad, j.

  Thanks for posting your query on the Microsoft Community.

  I would appreciate it if you could provide the error message to better support on the issue. In addition, I would like you to answer the following questions to refine the question.

  • You did it any significant hardware or change software on the computer before this problem?
  • You are able to use the system anyway after the system hangs at startup?

  There are a few reasons your computer might hang, freeze, or crash. So I would say, you can remove the external devices except the mouse and keyboard, try the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If method 1 does not work, see the steps in the following link and check if they are useful.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Disclaimer : The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• How do windows 7 start, power button problems

  Windows 7 Home premium on side of Dell inspiron 560 3.6

  Windows does not start when the Start button / stop is pressed, windows has become a mini dump to protect the system, there is a timer on the Start button, what is the procedure to start?

  Hi Joan,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  a. you are able to view the Dell logo, when the system is turned on?

  b. What do you mean when you say, "windows went into a mini discharge to protect the system?"

  c. you are able to boot, sometimes, when you refer to "timer on the Start button? What Timer are you referring?

  d. do you have the Windows 7 installation disc?

  e. What is the final on-screen display when you turn on the system and let idle?

  If you are not yet able to see the logo of the manufacturer Dell during system startup, you may need to communicate with the hardware Dell supports for the diagnostic system hardware.

  If, however, you are able to see the nut of Dell logo not able to reach the login screen, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  If you have not tried running a startup of your system using a Windows 7 DVDrepair, I suggest you to try once. Try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If the problem persists, try the following method.

  Method 2:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Server wait times 2012 - Win 7 - DNS Client

  Background:

  Single Server R2 of 2012:

  Domain controller: * field (192.168.0.12)

  Primary DNS Active Directory integrated, double cards configured network team

  Clients Windows 7 Pro:

  Quantity 15 (with an assigned static IP, no DHCP, all cables, wireless), defined primary DNS on 192.168.0.12

  Cisco SmartSwitch SG200-26 - show NO error on one of the ports

  Randomly the DNS server stops just in response to DNS queries.

  Clients receive Error 1014: no DNS servers responded ORS

  Wait times when Internet browsing and access to the local server

  Computers lose all network connectivity, (as long as I use 192.168.0.x references I can access files on the network) just DNS resolution

  Customers (when it works)

  nslookup microsoft.com

  Server: server2015.* *.

  Address: 192.168.0.12

  Non-authoritative answer:

  Name: microsoft.com

  Address: 23.100.122.175

  When things do NOT work

  nslookup microsoft.com

  Server: unknown

  Address 192.168.0.12

  Unknown can't find microsoft.com: no response from Server

  After a few minutes, I can retry the command NSlookup and return works.

  All Windows updates have been installed on the server and the clients.

  This server / configuration is only 2 months old.  New server hardware and software.  Replace Windows SBS 2003.  Customers have been the same.

  Tried to disable all anti-virus, disabling all services necessary, re-configured to use only one network card.  The problem is more common that a new server has just arrived.

  I have no idea where to go from here.

  Thank you

  The problem ended up being the on the DNS server.  The local ISP changed the DNS server address and the forwarder was not set correctly on the DNS server.

  Thanks for all the support.

• Acer Aspire laptop computer does not start

  Lites button power screen stays black, the system tries to start, but he keeps power button light turns off.  I have a new disc of windows 7 32 & 64 bit.  I have the disc as a dvd before I turn on the power button.  With the new windows 7 dvd of 20 to 30 seconds to place power turns off.

  Anyone with knowledge of this problem would be grateful.

  Thanks in advance

  Hello Mojo,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?

  2. What is the brand and model of your computer?

  3. What are the troubleshooting steps you have tried so far?

  I understand that you are unable to start your Windows 7 system. To prevent your system from automatically restart, try to access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Select the option disable automatic error system reboot. Also, I suggest you try the following steps of diagnostics to verify if you are able to reach the office in one of the following modes methodical.

  Method 1:

  Please follow the underlying steps:

  Step 1. Disconnect all external devices except the keyboard and mouse.

  Step 2 I would like to start your computer in last known good configuration.

  If method 1 does not work, go to method 2.

  Method 2:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If method 2 does not work, go to method 3.

  Method 3:

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally.

  If the problem persists, proceed to method 4.

  Method 4:

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

• A Boot Configuration data (BCD) store

Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows 

Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows 7 Aero theme lost during the upgrade to IE11

  I lost the Aero theme when I upgraded from IE9 to IE11 and the update installed some Windows updates.  I've seen other reports, but nothing has worked.  I tried to uninstall KB2670838, but Aero is not returned.

  I need help to restore Aero.    The Aero Troubleshooter have not set, no problem, so who needs some attention.

  Update: I uninstalled the update of IE, no Aero.  I uninstalled the updates of windows, one at a time. still no Aero?  And the resolution of problems Aero said that everything goes well for Aero?

  Thank you

  Doug

  I got it fixed!

  Service of themes has been disabled!  Now why in the world an update would disable themes, and, if this is a necessary service for Aero, Aero store not that find and correct?

  Come on Microsoft, you have the resources, it's a lousy job!

  So Ashish, please add to your canned response, to check all the services necessary to support Aero.  I have checked a few previous attempts, but did not know that the themes was a necessary service.

  Hope this helps others with the same question, surely you won't get any help from Redmond.

  Doug

• Error in the Windows registry

  Sir when to start my laptop an error occure which...
  component 'iNova_tabs.ocx' or one of its dependencies not correctly registered: a file is missing or invalid.
  Please any1 help to fix this error.
  I have try several method but doesn't quite work...

  Hello Vikash,

  Thanks for posting your query in Microsoft Community Forum.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. What is the accurate and complete error message that you receive?
  3. What were the troubleshooting steps you have made in order to solve the problem?
  4. You have Microsoft Visual Studio is installed in your system?

  I understand that you get a boot error message when you start your laptop. This can happen due to third party software that may have a corruption of the file operation. Then I suggest that you try the following steps of diagnostics and check if the problem persists:

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode http://Windows.Microsoft.com/en-in/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Refer "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  Method 2:

  Check if you have set Windows Update to install pending. To do this, follow the steps in the following link:

  Install Windows updates in Windows 7

  Please install updates waiting for Microsoft Visual Studio.

  Try these steps and check if the problem persists. Post back with your results for assistance.