Is the Dell Precision T7400 support 64 bit platform?

Similar Questions

• Will be the Dell 1850/2850 support 64-bit os under esx 3.5

  Will be the Dell 1850/2850 support 64-bit os under esx 3.5.  If it will feature HA?

  Hello

  If the processor supports VT and enable you it in the BIOS. So yes

  What kind of CPU do you use? 5300series, 5400series

  and HA will also work

  Best regards

  Lars Liljeroth

  -

• 4 TB drive added for dell precision t7400 but does detect that 2 TB

  Hello everyone,

  We had a Dell Precision T7400 running windows 7 Professional SP1 and we have added a new hard drive (4to), but it does detect that 2 TB of disk (already placed the GPT disk).

  I read in another post that I started to update the SATA drivers?

  Is this correct?

  Where are the SATA drivers?

  Thank you.

  Best regards.

  The drive is connected to the motherboard or are they connected to a controller card? The T7400 controllers (SAS 6/iR, PERC 6 / i) do not support disks larger than 2 TB. If it is connected to the motherboard, you must update the Intel RST drivers:

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

• the dell photo printer 720 32-bit vista driver work with xp?

  the dell photo printer 720 32-bit vista driver work with xp?

  No, a Vista driver will not work with XP.

  Check the Dell support site to see if they have XP drivers for your printer.

  Reference Dell Driver Downloads:

  http://www.Dell.com/support/drivers

• Dell Precision M6400 Win7 64 bit Dell Webcam Central software missing

  Dell Precision M6400 Win7 64 bit Dell Webcam Central Software.

  Long story short, just bought a M6400, updated after purchase with SSD, clean install. Can't find Win7 64 bit Dell Webcam Central Software.

  Please help, no I can't go to my account and download due to the transfer of my laptop has not yet closed.

  Webcam is recognized in the windows configuration, but not at dell. Already deleted the software of the victory, but I have no way or nothing to replace it with.

  Help, please

  Hi hdpartman,

  If the webcam does not work, I recommend you to uninstall and reinstall the webcam drivers.

  To uninstall the Dell webcam central software, perform the following steps:

  1. Click Start.
  2. Click on Control Panel.
  3. Using the drop down next to the view by: in the upper right, select large icons.
  4. Click programs and features.
  5. Click Dell Webcam Central.
  6. Click on uninstall.
  7. Confirm the uninstallation by clicking OK.
  8. Once uninstalled, restart the computer.

  I have provided a link below to reinstall the webcam drivers.

  http://Dell.to/YZkDs3

  Waiting for your answer!

• Card PCI-6259 is compatible with the Dell Precision 390?

  Hi all

  I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

  Thanks to all in advance.

  Kind regards

  justdomechanicalengineering

  Hello

  We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

  Best,

  Dan Nelson

  Technical sales engineer

• The destination does not support 64-bit clients

  My VMware server contains two Quad Core 64-bit processors.  I'm migrating a physical machine running Windows 2 k 3 64-bit to a virtual machine, but the migration/converter of VMware software responds with, ' < span class = "objects" > the destination does not support 64-bit clients.» Why doesn't it let me convert the machine?  Thanks for any help.

  You must enable VT in the advanced options of the BIOS of the HOST servers.  Once this is done, you must turn off the physical machine and power then turn it back on.

• Workstation Dell Precision T7400 will not power with ATI Radeon 5970 installed

  Hello

  I had my dream, the monster bi - GPU ATI Radeon 5970 video card and installed in my T7400 but the system will not start, all I get is a fast fan rotation and a kind of sounds from food, a bit like "Brrrnt, click on" led me to believe that the power supply could not handle my video card.

  The video card requires an 8pin and 6-pin power plug. When I plug the 8-pin and 6-pin and turn on the computer, is a no-go as shown above. When only the power plug 6-pin I plugged the PC sounds like it will start, the power of fans but no display as I expect.

  I tried this video card into the two PCI-Express slots with the same failure as a result. The computer works fine with the Nvidia Quadro 3700 in it... using a 6 power connector pins.

  I got the ATI Radeon HD 5970 video card in a store of the local computer and it had tested ($15) because I didn't test it in a spare computer and video card passed with flying colors...

  That's why I thought my 1000 Watt power supply was a problem, so as a bet, I ordered a replacement off eBay and received a sweater to work more the wiring harness and completely replaced the two who has a job to say the least! Have you tried to replace the wire bundle? a lot of work...

  I got it all back together, crossed my fingers and prayed and tried again and the same thing... NO LUCK... I put the graphic card Nvidia Quadro 3700 back in and the system of power like a charm.

  What on earth could it be the cause for it? I REALLY want to get this video card works in this system.

  I even tried a bios update and carefully watched the card mother and everything that I could to see if there's... nothing exploded capacitors...

  Please HELP - I want to get my game...

  Wesley

  I think I found the solution and I would like to mention it here to help others if they get him...

  A: the power of Dell for the T7400 was designed to produce five rails 12 volts @ 18 AMPS each and the video card requires approximately 45 to 50 amps to work properly. Video cables (one with a 8 pin) and 6-pin on the harness even seems to only provide amps 18 or more and the computer will not power because power protection circuit sees too many amps being requested by a 'rail' and turns off immediately...

  I went to electronics of FRY in San Jose and bought a few cards that helped divide the current between different sources, such as the cables of the hard drive and video.

  B: I have a small battery backup power unit and my T7400 was plugged into the saved game... When I got the video card to work, he could make a beep loud and after minutes cutting my T7400 due to the mainstream power support... I plugged the computer into a 'surge protector' but not battery backed up to the slot and since then had no problems...

  Now after several tests including FurMark, my graphics card stress works very well in this system... This is due to an unfortunate design in the T7400 power supply and wiring... Now that I have this solved, I hope that someone else can benefit...

  Get an adapter like this one, it allows to separate the power sources for the 8 power connector pin and use the PIN 6 original which is connected to the Dell printer condition 8 pin adapter, for the 6-pin slot... hope that makes sense... by trial and error, you got it right!

  I had one like this:

• The Dell Precision T7600 CPU temperature and fan speed

  Hi all

  I recently got a Dell Precision T7600 workstation that has two processors Xeon E5-2620.  I checked the specifications of Intel and the maximum temperature for these processors apparently is 77.4 C.

  However, when you run fairly intensive applications that can last a few days or so to analyze, I noticed that the CPU temperatures get much hotter than this no difference in the speed of the fan.  I used speedfan and CPUID to check the temperature/fan speed.  The highest I've seen the temperature was 90 c and the fan speed has been only 900 RPM.  He regularly sits on 70 c and still no response from the fans.

  I find this a little hard to believe given that surely fans should be a little lower than 90 c action!  I checked the settings of the bios (version A05) and the fan speed control is on auto.  I have also run the diagnostics and it reported no problem.  The fans run, but I'm not convinced that is the speed controller!

  Is this normal?

  I managed to re - install the A10 bios (it appeared to include a few things my already installed version is not ).

  Anyway, tried to launch a number of things to keep the processor at 100% for a few hours.  It seems that the fan speed changes now and the maximum temperature of the processor, I was able to get (and briefly) was 72 C.  He had served mainly the mid to high 60s with fan speeds ranging between ~ 1000 - 1500 rpm, as required to keep it there.

  I would say that the new BIOS has solved my problem.

• Windows 7 works with the Dell Precision 670 computer?

  I have a Dell Precision 670 workstation. It came with Windows xp x 64. I later upgraded to Windows Vista Ultimate x 64. The only problem I had at the time is that the host SCSI controller is not recognized by Vista. I used the XP x 64 drivers for the scsi controller and worked well. I want to upgrade my Vista x 64 to Windows 7 x 64. Everything else does? Doing a job? The Windows 7 Upgrade Advisor reports the controller scsi HD as an unknown (just under the name Vista Upgrade Advisor).

  The HD controller is an embedded controller the Adaptec SCSI HostRaid (Ultra320). I was not able to determine the model # of the controller.

  A representative of Micorsoft with what I discussed this said as a general rule, if your hardware works with Vista service pack 1, you're usually good to go.

  On the Dell website, it lists the 690 as working with Windows 7. It is a similar job, but I can't say with certainty how similar.

  I saw him last night. I'll look over it.

  Dave.

• The Dell Dimension E520 Support PCI Express 2.0?

  Hello

  I have a Dell Dimension E520 and I'm going to buy a graphics card but I don't know if my Dell Dimension E520 supports PCI Express 2.0.

  Thank you

  Message edited by Winston Liang on 19/08/2008 15:32
  
  

• Tesla M2090 in Dell Precision T7400

  I'm trying to use a Tesla M2090 GPU in my Dell workstation to expedite the processing of the CPU.  I have a nVidia GPU GTX580 for my monitors.  I downloaded the drivers, but I get a message for the Tesla which says "insufficient system resources exist to complete the API".  It also gives me a "Code 10".  Any suggestions?

  I got it works!  I saw the power connector 8 pins at the rear of the Tesla (I used only the 6 pins on the side).  It wired properly and reinstalled all the drivers.  Don't know how do to post a picture, but the device driver displays the two cards to work.  A ran a benchmark CPU and got better results, especially with floating math, the numbers first and Compression.

• How I could recover the Dell Center's Support, Internet Explorer and Recycle Bin Icons?

  I have a click with the right button on desktop, click on customize, click Change desktop icons, and clicked on restore by default as advised by you. However, nothing happened. Could provide you an alternative? Trash is very Important and I don't know what to do.

  Hello

  Thanks for posting the question on the Microsoft Community Forums.

  According to the description, it seems you are trying to arrange the icons on the desktop.

  It would be great if you could answer these questions to help you further.

  1. you try to create the desktop icons?

  2 have you made changes on the computer before this problem?

  3. is that your desktop icons are missing?

  To create the desktop icons, I suggest you to consult the following Microsoft article.

  Add or remove icons on the desktop: http://windows.microsoft.com/en-US/windows7/Add-or-delete-desktop-icons

  The desktop icons are missing, then I suggest you try the following steps.

  Check if the icon show desktop is enabled.

  a. right click on an area empty office.

  b. click view.

  c. Select the Option "show all desktop icons.

  Reference:

  Show hidden files: http://windows.microsoft.com/en-US/windows7/Show-hidden-files

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  Note: I suggest you continue on the original thread that will help to avoid the creation of duplicate threads please.

• Whenever I try to upgrade Vista to Windows 7, I get the following "the mode is not supported on this platform" what the problem is. ?

  Try to upgrade Ulitmate from Vista to Windows 7 Ultimate

  If you purchased Windows 7 Upgrade

  You try to go from 32 bit to 64 bit? You can't go from 32 bit to 64 bit, a clean install is required. If you have any questions about the upgrade from 32 bit to 64 bit or vice versa, please see this FAQ: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  If you have purchased a "Anytime Upgrade"
  If the product you have Windows 7 'Anytime Upgrade' does not allow to move from XP/Vista to Windows 7. You can buy the product at retail of Windows 7 Upgrade not the ' Anytime Upgrade '.

  Windows 7 'Anytime Upgrade' is for moving from one version of Windows 7 to a higher version, such as Windows 7 Home Premium to Windows 7 Professional.
  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  How to upgrade:

  If you have Vista:

  Update: http://windows.microsoft.com/en-us/windows7/help/upgrading-from-windows-vista-to-windows-7

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Installation - 'upgrade' means what?
  Upgrade means that you can install Windows 7 simply by inserting the Windows 7 upgrade software in the DVD drive of your PC and follow the instructions on the screen. While you are not required to backup and reinstall your files, or reinstall your programs, it is a very good idea to back up your files and settings before you start any upgrade to the software. Get more information on the software updates and best practices .

  Installation - what does "Custom (Clean)" Mean?
  A custom (clean) installation clears the contents of the hard drive of your PC. Your files, settings, and programs will not be transferred to Windows 7. This means that to install Windows 7, you must:

  • Back up any files and settings you want to keep

  • Install Windows 7

  • Reinstall all your files

  • Reinstall all the programs you want to use.

  These four steps take time, skills, techniques and Windows Easy Transfer can help. However, if you are not comfortable with this process, please consider having the installation carried out by a local service provider.

• Dell Precision 390 and Windows 7 64 bit driver support

  We have a Dell Precision 390 and want to pass this to a Windows 7 64-bit operating system.  Several months ago, I noticed driver support for Windows 7 64-bit for the Dell Precision 390 model but pilot at the moment the site and downloads not support all these drivers for Windows 7.  It seems that the support has been removed.  At best, it supports only Windows Vista 64-bit.  Can someone explain why there is no support driver for Dell Precision 390 for the 64-bit Windows 7 platform?

  Tony

  I have a Dell Precision 390 and Windows 7 Ultimate 64 - bit loaded just fine and it is running.

  It is strongly suggested that you do a clean install.

  So I wiped my HD (after backing up personal files). Don't come to format your drive, I mean totally wipe it.

  Automatic updates will install the drivers you need for any connected device or visit the manufacturers for your drivers.

  So in short, "Don't sweat it".

  Go ahead and download this puppy goes for a few years.