Tesla M2090 in Dell Precision T7400

Similar Questions

• 4 TB drive added for dell precision t7400 but does detect that 2 TB

  Hello everyone,

  We had a Dell Precision T7400 running windows 7 Professional SP1 and we have added a new hard drive (4to), but it does detect that 2 TB of disk (already placed the GPT disk).

  I read in another post that I started to update the SATA drivers?

  Is this correct?

  Where are the SATA drivers?

  Thank you.

  Best regards.

  The drive is connected to the motherboard or are they connected to a controller card? The T7400 controllers (SAS 6/iR, PERC 6 / i) do not support disks larger than 2 TB. If it is connected to the motherboard, you must update the Intel RST drivers:

  https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

• Workstation Dell Precision T7400 will not power with ATI Radeon 5970 installed

  Hello

  I had my dream, the monster bi - GPU ATI Radeon 5970 video card and installed in my T7400 but the system will not start, all I get is a fast fan rotation and a kind of sounds from food, a bit like "Brrrnt, click on" led me to believe that the power supply could not handle my video card.

  The video card requires an 8pin and 6-pin power plug. When I plug the 8-pin and 6-pin and turn on the computer, is a no-go as shown above. When only the power plug 6-pin I plugged the PC sounds like it will start, the power of fans but no display as I expect.

  I tried this video card into the two PCI-Express slots with the same failure as a result. The computer works fine with the Nvidia Quadro 3700 in it... using a 6 power connector pins.

  I got the ATI Radeon HD 5970 video card in a store of the local computer and it had tested ($15) because I didn't test it in a spare computer and video card passed with flying colors...

  That's why I thought my 1000 Watt power supply was a problem, so as a bet, I ordered a replacement off eBay and received a sweater to work more the wiring harness and completely replaced the two who has a job to say the least! Have you tried to replace the wire bundle? a lot of work...

  I got it all back together, crossed my fingers and prayed and tried again and the same thing... NO LUCK... I put the graphic card Nvidia Quadro 3700 back in and the system of power like a charm.

  What on earth could it be the cause for it? I REALLY want to get this video card works in this system.

  I even tried a bios update and carefully watched the card mother and everything that I could to see if there's... nothing exploded capacitors...

  Please HELP - I want to get my game...

  Wesley

  I think I found the solution and I would like to mention it here to help others if they get him...

  A: the power of Dell for the T7400 was designed to produce five rails 12 volts @ 18 AMPS each and the video card requires approximately 45 to 50 amps to work properly. Video cables (one with a 8 pin) and 6-pin on the harness even seems to only provide amps 18 or more and the computer will not power because power protection circuit sees too many amps being requested by a 'rail' and turns off immediately...

  I went to electronics of FRY in San Jose and bought a few cards that helped divide the current between different sources, such as the cables of the hard drive and video.

  B: I have a small battery backup power unit and my T7400 was plugged into the saved game... When I got the video card to work, he could make a beep loud and after minutes cutting my T7400 due to the mainstream power support... I plugged the computer into a 'surge protector' but not battery backed up to the slot and since then had no problems...

  Now after several tests including FurMark, my graphics card stress works very well in this system... This is due to an unfortunate design in the T7400 power supply and wiring... Now that I have this solved, I hope that someone else can benefit...

  Get an adapter like this one, it allows to separate the power sources for the 8 power connector pin and use the PIN 6 original which is connected to the Dell printer condition 8 pin adapter, for the 6-pin slot... hope that makes sense... by trial and error, you got it right!

  I had one like this:

• Is the Dell Precision T7400 support 64 bit platform?

  OK, my company bought the machine above, which has the double hearts Inet Xeon E5410 2.33 GHz CPU and 16 GB of RAM and 3 500 GB SATA HDD, as it should be my virtual machine.

  I installed Ubuntu 9 64-bit as well as 2 VMServer.

  I created a VM XP 64-bit, HARD drive, but when I booted from its ISO, Windows says it wasn't a 64 bit system?

  VMWare does support this 64-bit system, as its tool of 5.5 detection PDF lack the correct command for linux?

  If it is supported in Windows but not Linux, well, at least I can still use it like a virtual environment.

  Hello

  According to the information that you gave, your machine supports 64-bit CPU comments, but:

  You have activated VT settings in the BIOS of your host? If this isn't the case, you must do.

  You must enable "trusted execution" (if it is present in your BIOS).

  You have to cold reboot after that.

  J.

  You can read Re: problems installing Windows Server 2008

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• x 8 connection distance MXI causes conflicts with my on my Dell Precision T3600 PCI slot

  Hi all

  The easiest to say is that I am migrating from a x 4 MXI explicit connection to an x 8 MXI express connection and when I do I get an error on the motherboard which is unable to load the single PCI slot.

  Error in WIn7 64 bit Device Manager reports a yellow exclamation point

  Device "Intel (r) 82801 PCI Bridge - 244 properties"

  The error listed in the device status box: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Unfortunately, I need this slot machine to run a card calendar to conjucton with PXI hardware. There is no anomaly when I used the x 4 connections with virtually the same loadout except for one Exchange a PXI-5122 (x 4 config) to SMU 5122 (x 8 config).

  If I leave the MXI PCIe card in but do not connect to chassis PCI slot SMU (and the fine card appear.)

  If I remove the PCI card into the slot, the error still occurs.

  I swapped the x 8 card and NVidia graphics card without success (the 16 x only two slots).

  I photographed the reader and removed the H310 Dell PERC RAID card and charged the RAID array RAID integrated Intel C600 and still no change.

  I have updated BIOS to A07 to latest A08.

  I updated the Intel Chipset at the latest on the Dell Web site.

  I guess that I just wonder at this point if someone is able to run a x 8 MXI express at SMU with a Dell Precision T3600, T5600 or a T7600 chassis.

  PC - Dell Precision T3600

  Windows 7 Enterprise 64-bit SP1

  3.2 GHz Xeon 6 core (E5-1650) w 16 GB of DDR3 memory

  Reference Dell PERC Raid (x 8 PCIe) H310 / C600 onboard Intel RAID

  Nidia Quadro 600

  2 x 1 TB SATA drive (mirrored)

  SMU Rack - OR 1082

  Slot 1 - SMU - 8381

  Slot 2 - OR SMU 5122

  Slot 3 - NOR SMU 5442

  Housing 4 - OR 4 to 6 TB RAID NI 8262 x MXIe

  Housing 5 - PXI 6733

  Housing 6 - PXI 6733

  NI MAX report is attached as a text file.

  After much work by NI Applications Engineer Kyle K, this problem has been resolved.

  I'll post the solution to this PC dependent problem here, just in case it will help others in a similar situation.

  It seems that Dell sometimes uses one default BIOS quite restrictive on the number of PCI bus in these (and other). By allowing several PCI bus, you will be able to list all the devices in the sacrifice of some memory available for OS 32 bit running on 4 GB of RAM. No problem for me because I'm under 64 bit OS.

  Congratulations to Kyle even if he has not posted here yet for him give real congratulations.

  Greg

• Card PCI-6259 is compatible with the Dell Precision 390?

  Hi all

  I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

  Thanks to all in advance.

  Kind regards

  justdomechanicalengineering

  Hello

  We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

  Best,

  Dan Nelson

  Technical sales engineer

• I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS

  I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS

  Original title: upgrade of 390 dell precision

  Unless you can find the product that is not manufactured, your choices are limited to Windows 7 and Windows 8.

  Compatibility of your hardware and software research first...

  Windows 7: http://www.microsoft.com/en-gb/download/details.aspx?id=20

  Windows 8: http://windows.microsoft.com/en-gb/windows-8/upgrade-to-windows-8

  Tricky

• Dell Precision 690 memory risers

  Original title: Dell PRECISION 690 MEMORY RISERS

  Help...
  Ive a precision 690 workstation, WITH 4 GB = (2 X 2 GB) WITH MEMORY installed now and Ive mounted a 1kw power.

  I JUST GOT A PR OF MATCHING RISERS (EG) 1,2 & 3.4...

  BUT THAT IS WHERE THE PROBLEM BEGINS.

  THE DISPLAY SHOWS THE RISERS MUST BE INSTALLED IN SETS OF FOR.

  AS SOON AS I INSTALL MORE MEMORY MAKES THE FAN BACK SOUNDS LIKE HIS WILL EVEN TAKE OFF BY PUTTING IN THE GAME OF MEMORY (4 GB), I GOT IN WITHOUT THE RISER INSTALLED FANS TO ACCELERATE.
  SOMEONE POINT ME IN THE RIGHT DIRECTION BECAUSE IM CERTAINLY SOMETHING WRONG.

  The page linked below can be useful, since it covers the installation of memory with the memory riser cards:

  Dell Precision Workstation 690 user's Guide
  Installation of memory (with maps of memory riser option)
   http://support.Dell.com/support/eDOCS/systems/ws690/en/UG/memory.htm#wp1063555

  If this is not enough, so I suggest the following tips to Shenan Stanley and contact Dell technical support.

  Kind regards

• Dell Precision T3500 speaker internal

  Hello

  I just installed an internal speaker in my Dell Precision T3500.  How to configure a Windows 10 system use this speaker?  The internal speaker made reference to the T3500 product documentation, but I have found no documentation on how to make it work.  I guess it's a cheap business speaker, so I know that the quality is not great.  I hope just to a few basic out of it sounds.

  Thanks in advance,

  Rob

  Until you install the OEM driver, it will not work. The oem driver install the ESP AUDIO Panel that "recognizes" the speaker.  The generic Microsoft driver does not support the internal speaker of business.

  AD198X and ANALOG Soundmax AUDIO must have AUDIO ESP to detect the speaker.

  ESP AUDIO Control Panel Soundmax Applet which 'sees' the speakers and the headphones etc plugged into the audio codec or NOT.

  

  The problem is that by default, windows 7 or 8 or 8.1 10 will use a generic HD Audio driver and therefore things like the internal affairs speaker will not work and soundmax Audio ESP does not exist.

  

  The solution is to install the Dell driver and let windows update to decide if the driver needs to update whql.

  It is a common problem.   The function Audio ESP asking you what is attached to the port is not enabled in generic win7, win8, pilot win10.  You will also need to install DOTNET 4.0 and Directx June 2010

  Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

  Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  

• Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content

  I have a

  Dell Precision 7710

  6920HQ-i7 CPU @ 2.9 GHz

  32 GB of Ram

  Windows 7 Pro Sp1

  NVIDIA Quadro M5000M 369.49 driver version

  I bought an upgrade for my

  M6700 Precision

  Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer.  When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable.  The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.

  We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.

  As far as I can tell all our drivers for everything on this laptop are up-to-date.

  We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.

  I tried tweaking pretty much all other settings I can think / see.

  I tried to use the Dell Precision optimizer to select different profiles with no luck.  The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.

  I ran Diagnostics on the laptop available on the Dell support site.

  I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application.  We have desktop computers at the office where he works well with other Nvidia cards / best of all.

  In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect.  I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.

  So I wonder:

  If anyone out there has experienced something similar?  If so, any suggestions on how to fix or things to try would be greatly appreciated.

  Thank you

  We solved the problem by making changes in our application software.  We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also.  Perhaps because we are trying to run the application at 4K.  If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.

• Dell Precision T3500 and SPDIF Port

  Hello

  I'm in the market for a new computer because my old HP died and I really like the Dell Precision T3500. I would like to put one of my old graphics card in the new Precision T3500, a Nvidia Geforce 8500 GT because it has a HDMI port on it and I want to drive my television station. However, have sound out of the HDMI on the Geforce port, you must connect an SPDIF cable on the Geforce to the SPDIF port on the motherboard. Is my question, there a SPDIF port somewhere on the motherboard in a Precision T3500? I looked but I have never seen a list of anywhere. Thank you very much for the help!

  Chris

  Hi Chris,

  Thanks for looking in the Precision T3500 computer next and we hope that you don't end up buying one!

  That said, I must not be the bearer of some bad news that this system is not equipped with an SPDIF port on the motherboard. A possible solution would be to buy a sound card has a SPDIF connection and then connect the graphics card to that. Of course, it would take one of your PCI/PCI-Express slots.

  I hope that answers your questions - if there is anything else, please let me know!

• Dell Precision 5510 - M2 SATA SSD

  Hello

  I recently bought a Dell Precision 5510 and I now intend to install a 500 GB SSD (M2), or a Samsung 500 GB 850 EVO m2 and a critical CT500MX200SSD4.

  Does anyone know if one of these two SSD is compatible or have any problems with this laptop?

  Thank you

  J.

  Thanks for posting your request here.

  These two device should work without any problems after the upgrade.

• Dell Precision 490 CPU Upgrade

  Hello

  My Dell Precision 490 currently runs 2 x Intel Xeon 5130 (Woodcrest) 771 socket LBA.  The Intel Xeon 5160 next would be compatible with my system. My mobo is ODT031 / 5000 X of Chipset / 6321ESB Southbridge.

  Server Intel Xeon 5160 3.0 GHz dual core Socket 771 CPU SL9RT 4 M/1333 64 - bit

  Type of CPU / microprocessor
  Server market segment
  Family Intel Xeon 5100
  Model number? 5160
  CPU HH80556KJ0804M reference numbers are a microprocessor tray/OEM
  BX805565160A is a microprocessor in a box
  BX805565160P is a microprocessor in a box
  Frequency? 3000 MHz
  The bus speed? 1333 MHz
  Clock multiplier? 9
  The package 771-land Flip - Chip Land Grid Array (FC-LGA6)
  1.48 "x 1.48" (3.75 x 3.75 cm)
  Socket Socket 771 (LGA771)
  Introduction date 26 June 2006
  Price at introduction $851

  S-spec numbers
  Production processors of'RE / QS
  Part number QLUF QOXI QTII QXQT SL9RT PLATE SLAG9
  BX805565160A +++
  BX805565160P +++
  HH80556KJ0804M +++

  Architecture / Microarchitecture
  Core microarchitecture
  Bensley Platform
  Cranberry Lake
  Glidewell
  Core processor? Woodcrest
  Review of basic? B0 (QLUF)
  B1 (QOXI)
  B2 (QTII, SL9RT, SLABS)
  G0 (QXQT, SLAG9)
  CPUIDs 6F6 (SL9RT, SLABS)
  6FB (QXQT, SLAG9)
  0.065 micron manufacturing process
  Data width 64-bit
  The number of cores 2
  The number of threads 2
  Floating Point Unit integrated
  Level 1 cache size? 2 x 32 KB instruction caches
  data cache 2 x 32 KB
  Level 2 cache size? 4 MB of shared cache
  Multiprocessing up to 2 processors
  With MMX technology
  SSE
  SSE2
  SSE3
  Extended Memory 64 technology (EM64T)?
  Virtualization technology?
  Execute disable bit?
  Power mode low features HALT
  Extended halt mode
  Stop grant mode?
  Enhanced SpeedStep technology?

  Thermal/electrical parameters
  Nucleus of V? 1V - 1, 5V (B2 Stepping)
  0.85V - 1, 5V (G0 stepping)
  Minimum/Maximum operating temperature? 5 ° C - 56.5 ° C (B2 Stepping)
  5 ° C - 60.7 ° C (B2 Stepping)
  5 ° C to 65 ° C (G0 Stepping)
  Maximum power dissipation? 130.83 watt
  104,84 watt (continued)
  Thermal design power? 65 watt

  Notes on Intel HH80556KJ0804M
  The bus frequency is 333 MHz. Because the processor uses Quad bus Data Rate effective bus speed is 1333 MHz
  Part BX805565160A includes 3U + active / passive thermal solution 1U
  Part BX805565160P includes the 2U passive thermal solution

  I tried an Intel x 5365 and it remains as a CPU not supported. I'm under revision of BIOS A08. There is sauce more involved magic, such as a general release BIOS rev no?

• Hard drive not recognized by BIOS in Dell Precision T7910 workstation

  Greetings,

  I recently acquired a Dell Precision T7910 workstation without all the hard drives installed, so I went to the store and buy a 240 GB Sandisk SSD put in the hard drive and then installed caddy caddy in port 0 (I also tried port 1 with the same results), and then I turned on the computer and it says "no drives found" press f2 to enter setup or press f5 for the diagnostics. I think there is probably a setting in the BIOS to configure the hard drive that I'm ignorant, so any help would be appreciated.

  Is there a CTRL-R (or another command CTRL during POST) to enter a for the LSI controller configuration utility? Possible that if installed/enabled, ports are managed by the controller LSI instead of the BIOS. However, I have not a 7910 to watch... just go out how it worked normally.

• Dell Precision 390, processors who work for an upgrade?

  We have two Dell Precision 390. One with the Conroe E6300 and one with the Pentium 4 631, variety of Cedar Mill.

  We want to upgrade the P4 to something better.

  We have a lying here Q6600 processor, and an old Pentium D 830 dual core CPU, but it's be better performer than one heart P4.

  Are the same motherboards in these two 390 s? I think that our E6300 could be improved to a Q6600, but the 390 with the P4, I'm not sure. They are all two socket 775. We already have the necessary correct heatpipe radiator for more hot processors.

  Thank you

  I got the info from Dell today. There are two motherboards used in the 390. We support the line Cedar Mill and Conroe CPU. The other motherboard for 390 supports the Q6600, QX6700 and QX6800.