is the system of valid remote adjustment?

Similar Questions

• How to tell if someone uses remote adjustment to control the use of my computer?

  How to tell if someone uses remote adjustment to control the use of my computer?

  * original title - monitoring computer use *.

  Hello

  Why do you think that someone is watching your computer use? One would have to have
  loaded tracking software (trojan) on your computer or have access to the source of the network
  you use, such as cable, on your leg of it and have very sophisticated equipment.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• "Info product programmed into the system card is missing or not valid card system:

  Info product programmed into the system card is missing or not valid card system:

  The OOA product name,

  OOA serial No.,

  OOA product #.

  System OOA board ct #.

  I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

  Jenn121 wrote:
  

  How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

  Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

• When I go to open the file on my desktop, the system is said to I need to select a valid program

  Original title: RECYCLED FILES

  Hello

  My son deleted my files from a USB key that I got my recyle folder, but when I go to open the file on my desktop, the system is says I need to select a valid program (ending in exe).  I was thanks to troubleshoot which recommended I have download iLivid I have but when I paste the document my Clipboard is empty.

  Thank you

  JO

  Hello

  1. what operating system is installed on the computer?

  2. which documents are is it?

  3. for where you retrieved the documents from the trash?

  4. What is the full error message when you try to open documents?

  You need a program to open any document.

  Change the programs that Windows uses by default:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• Remote Desktop error: the system cannot find the specified file. C:\WINDOWS\system32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI

  Came across an interesting problem this morning. After starting my PC from various applications (OutLook 2002, Management Studio of SQL Server 2008, etc.). I was able to connect to a server by using Remote Desktop (RDP, alias). On trying to connect to a second system, I started getting the following error message:

  The system cannot find the specified file. C:\WINDOWS\system32\\mstsc.exe.MUI

  Will always be connected to the server, I tried to launch a second instance using RDP, but received the same error message.

  I googled the error and found different solutions (the best solution to examine ishttp://social.technet.microsoft.com/Forums/en-US/itproxpsp/thread/164d1e0b-51e6-4201-9dc2-3f4a0ccb14e5), however, none of the solutions seemed to work.

  I tried checking the virus/malware, etc, but nothing was found. I tried to re - load the dll and the exe (s), but still not received the error message.

  The next solution was to try to see what can be changed on my system (new programs, etc.). I noticed there is an update downloaded to my system (C:\Windows\WindowsUpdate.log): AutomaticUpdates content success install successful and Restart required for the following update: update for Windows XP (KB969084)... the update is related to remote desktop.

  I rebooted the system, still not received the RDP error messages. Is I did a complete "install updates and shut down ', and then restarted my system that started working again.

  For the record, here is some information on my system:

  XP Professional: Version 5.1 (Build 2600.xpsp_sp3_gdr.091208 - 2036: Service Pack 3)

  c:\windows\system32\mstsc.exe: 6.1.7600.16385

  I wanted to just post this in case someone else runs into a similar problem...

  Thank you!

  Argue for your limitations and of course they will belong. -Richard Bach, Illusions

  I have a machine with the same problem

  XP Professional: Version 5.1 (Build 2600

  I installed the update for Windows XP (KB969084).

  It does not, but a reboot is required because the system is running on the old dll

  MSTSC.exe works now

  Thanks for the info!

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ &#60; LANG_NAME &#62; \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Remote Desktop area is missing the 'Remote' tab in the System Properties dialog box window?

  Remote Desktop area is missing the 'Remote' tab in the System Properties dialog box window? I can not set up or add users. Remote assistance is the ONLY settings and options that I see. It is a brand new OEM Vista Home Premium X 64 installation with all updates (SP2). That's the problem since it was first started.

  I'm sorry, but it is not possible to access Vista Home Premium via Remote Desktop.  To do this, you need Vista Business or Vista Ultimate.

• WIN 64: The application is valid but was designed for a different system (32-bit).

  I have an application written in Toolbook 4.0 (WIN 95 to 1996). It works fine in XP 32-bit. When I try to run in XP 64, I get the error message "the application is valid but was designed for a different system" is at - it an emulator or a way to make a 64-bit computer to run 32-bit code? I know that this application is old but it works fine in XP 32 and I can't replace it witout totally re - develop from scratch.

  There are several options depending on your operating system.

  For XP/Vista: You can use Microsoft Virtual PC 2007 and run Windows XP x 32 inside your x 64 system.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

  For Windows 7 (Pro and Ultimate only): you can use Windows Virtual PC, which comes with a copy of Windows XP on the inside to run legacy applications.

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• When you try to log on, get error - "the system event notification service has no logon. the remote procedure call failed and did not execute. »

  My netbook will not open a session because it can not find a certain file. She won't tell me the file. and when I try to go to safe mode it freezes... is there anyway I can just read another account another point? the message I get is "the system event notification service does not log. the remote procedure call failed and did not execute. "tips anyone? I care is no longer the files it contains. If I could wipe it off somehow to factory settings then would be too cool. his windows 7 starter edition

  
  Original title: hp netbook to log issue

  You have two options:

  • Perform a factory restore. Check the homepage of the manufacturer for instructions.
  • Start the computer with your Windows XP installation CD, and then follow the prompts. You will have to find the different drivers to match your hardware, for example a driver for SATA hard drive.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Name of the system does not appear in the remote site

  Dear community,

  I have C - 60, which is recorded in SIP, I mentioned the name of my option 'SystemUnit' unit and also type the same ID of H:323 Alias (but I'm not using H:323)

  This is: when I connect the call Point-to-Point or via MCU part remote see our IP not the name

  Kindly seated me in this matter.

  Ahsan Syed

  Hello

  Try the following command:

  xConfiguration SystemUnit ContactInfo Type

  Describes what setting to put in the field of status at the top left of the screen. The information can also be read with the command SystemUnit ContactInfo xStatus.

  Requires the user role: ADMIN

  Value space:

  Auto: Salons of the address that can dial to reach this system, according to the default dial Protocol and registration from another system.

  None: Do not show any contact information.

  IPv4: Watch IPv4 address as the contact information.

  IPv6: Watch IPv6 address as the contact information.

  H323Id: Indicates the H323 ID as the contact information.

  E164Alias: Shows the H323 E164 Alias as the contact information. SipUri: Displays the SIP URI as the contact information. SystemName: Displays the name of the system as the contact information.

  Example: xConfiguration SystemUnit ContactInfo Type: automatic

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC5/api_reference_guide/codec_c60-c40_api_reference_guide_tc51.PDF#page61