Error in the configuration of the adapter of the EBS for WebCenter

Similar Questions

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• Installation of the EBS for the use of 5-10 years

  Hi all

  ALL EBS

  RHEL

  I understand that when we sell EBS customers, they think that they will use it for a long time in order to make the economy because this expensive product.

  But the limitation is, the server gets amortized and dated or crashed after 4 years. Then the new powerful and less expensive servers will come out, but the old BONES after these times are no longer supported.

  In this regard, we can use VMbox to host the old operating system so that we can still use the EBS for a long time like 10 years? Is that a viable solution?

  Thank you very much

  JC

  Before you try to predict how scenario would be after a few years, you understand why updates are necessary. Updates always bring the novelties that are benefits in many ways. the upgrade of the operating system or software here, in this case is Oracle Applications. Always upgrade decision would be based on the cost to keep the current system and to upgrade the system. It depends also on the support get you from island Oracle and OS suppliers of suppliers.

  From now on, I know too few customers who still know the old 11.0.3 ERP systems that are run on very old OS versions and at the same time there are customers who are always on the latest versions of OS and Oracle applications.

  You can keep your old system of time as long as you can support, you can have BONES on VM while it's the combination of supported

  concerning

  Pravin

• error in the search for driver updates.

  I did a self diagnostic computer and he felt that the 6TO4 card has a 'configuration problem preventing it from properly start"," maybe he have good driver or may be affected by a hardware failure. "The Plug and Play ID for the device is 13" there was another driver that does not leave too, "Plug and Play #is ROOT\ * 6T04MP\0000» I am also including the information that I found on the driver #' s: pilot 6TO4 adapter c:\windows\system32\DRIVERS\tunnel.sys-driver version: 6.0.6000.16386 file version: 6.0.6001.1800(longhorn_rtm.080118-1840). I also found, "this device cannot start code 10.", "Windows finds drivers software for your device but encountered an error trying to install it.". He also told me that Sigmatel C-major also had information about this but I have not checked who yet because I found on a part of the device manager that all the updates had been installed. I went to Windows Update to make sure that all my options have been exhausted and found: "Windows could not search for new updates and error occurred when searching for new updates to your information. Error found Code 80070490. Windows Update has encountered an unknown error. ». He also told me to ask for help, so here I am, I have not install no matter what material I have downloaded a few security programs and what not, I'm too hip on Windows automatic updates I am too a novice not I don't (yet) know it as the computer and does not need, so I left it on automatic from the start. I have clkd on the diagnosis of the problem and the solution to go home, which is what you see above, I tried to clk on install updates, but the computer says all updates are installed, but the driver does not always work. I've had the computer for less than a year (my first one), but I had no real problems with it other than what I've caused by my own ignorance. If I had not run that diagnosis I wouldn't have known I had a problem with the driver, but it is obvious to me that if the computer will function even though all aspects of it should work. I only know about it for about a week, I had other things to do and I can do without this driver does not work, but I want it fixed too. So what do I do about it? Thank you for all that help you can provide.

  Hello dumdeedumdum,
   
  a. you have problems with the network for not being able to update the driver?

  b. What is the operating system installed on your computer?

  The best way to fix this would be to go to the computer or the device Manufacturers Web site' and download the updated driver.

  Do not scan the computer for the update of the driver.
   
  If all your devices and the network works well, you can skip this update. Microsoft has confirmed that it is a problem in the Microsoft products listed in the section "apply to".
   
  If you have a Vista-based computer, you can consult this article:
   
  http://support.Microsoft.com/kb/932520/en-us

  I hope that the information above helps you.
   
  Kind regards
  Manasa P - Microsoft technical support.

• Need help with the error of the EFS for SBS 2008

  I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008.  Server doesn't let me encrypt on our network.  Our certificate on the server says it is valid and run cipher/r does not solve our problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Error "Unloading the box" for the download of victory 8

  I had a problem after another trying to get the 8 upgrade win.  First of all, even if Microsoft has validated my record ID, I could never get to the stage for the upgrade.  Instead, I was taken into a page to pay full for win 8 or Win 8 Pro.  I spend about an hour last night with Microsoft technical support.  No one could discover the problem.  Finally, I agreed to buy the product at full price and take out a loan for the total.  Now when I access my account at Microsoftstore.com, I have all the information on the order.  But when I start the download process I get this message when running the executable: unloading of the box.  An error has occurred.  Unspecificed error.  OK

  I did a complete restore of the system several days ago and then added all the updates on the computer that I use to download.  He has Win XP with SP3 installed and no AV installed (fear that it interferes with the download).  (I got the upgrade with the purchase of a Win 7 machine this last fall and to install the upgrade on the XP machine for now.)

  Updates, that I initiated on two other computers have finished without any problem, so I feel comfortable with the process.  However, the third effort seems to be missing the "charm" of the first two.

  Thank you for your help.

  This change solved my problem.  I found the information after a search on the web.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/problem-initiating-Windows-8-Upgrade-Assistant/a81a2b80-F032-46EC-a0e6-4512aa8bcbf4?page=3

  The problem seems to be that a service (Terminal Services) under Win XP does not start when necessary as part of the download process.

  Go to my computer. Right click and choose manage. Choose Services | Highlight the Server Terminal Services | Right click and choose Properties.

  Change the manual setting to automatic.  (Note that on the site, some users choose a different setting, but auto allows the service to run at startup.)  Close and restart the computer.

  I hope it's useful to others.

• The button "open in Smartview" error in the workspace for a user

  Hello

  One of our users is facing a problem while trying to open the data forms in Smartview via the workspace by using the option "open in Smartview. When you click on it it gives the following error: "the address is not valid."

  FYI - just to make sure I tried the same thing on another system with a different user name, and it seems to work correctly for the user and the system.

  It looks like an option or setting is not right or was messed up. Can you get it someone please let me know what setting/option could be the cause of this error and how to fix it.

  Future prospects for entries...

  You can connect to My Oracle Support Site and search for document id in the knowledge base search box. BTW, here's what you can do:

  1. uninstall Smart View
  2. Select START-> RUN
  3. type regedit
  4. go to HKEY_LOCAL_USERS\\software\HyperionSolutions\SmartView
  5 remove the Smart View key.
  6. close regedit.
  7 install Smart View

  Also, did you use are secure https protocol? In the options of IE, try to activate "Display mixed content" and see if that helps.

  See you soon... !!

  Rahul S.

• Convert the EBS for one example at RAC

  Hi all

  EBS R12.2.4

  11 GR 2

  OL 6.5

  I want to convert our EBS instance to RAC.

  Can you share me documentation on how to convert a single instance of the EBS R12.2.4 CARS?

  I need to convert both the apps and the level of db? or the level of db only?

  Kind regards

  JC

  Hi Vishnu,

  I ran the 2nd step: but received the error

  rman target $ /.

  Recovery Manager: release 11.2.0.3.0 - Production on Tue Feb 23 11:42:11 2016

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-00554: initialization of the package manager internal collection failed

  RMAN-04005: target database error:

  ORA-21561: OID generation failed

  Kind regards

• 91 error to the database for data Variant

  Hello

  This issue was raised after that I "solved" this problem earlier today: http://forums.ni.com/ni/board/message?board.id=170&thread.id=446931

  Now, I get the above error message on all functions 'DB retrieves the element '...

  

  I have the polymorphic option off - as I have it set to automatic...  The stored procedure in the above case is trying to choose a 0 or a 1, Boolean values ala.  However, this is not the only point of failure.  Actually, I get this error on each item to search, using 4 data types: Boolean, String, I32 and DBL...

  

  Can you see what I'm doing wrong?  I spose I'll upload my VI, but you will not necessarily be able to see the data of my STORED procedure is back...

  Thank you!

  Dave

  OK, this problem occurred because the stored procedure has been throwing up on my settings input parameter, unbenouced for me until I entered the code...

  The reason why I was getting this error was that I believe because I was getting a NULL Recordset...

  After that, I fixed my problem of input parameter, this large all worked.

• All printing errors in the queue for a shared printer

  I have a HP6110 connected to an XP machine.  It is shared and the printer is installed on a computer vista laptop.  I could print however now each job is in the queue and then goes into an error state.  The only way I can remove the task from the queue is to restart the print spooler.

  How can I fix once and for all?

  Well, I never aspired to be certified MCSE on NT than a few computers existing except in places like Bletchley Park to crack the enigma code messages .

  Deleting the files in the folder is at the heart of the fixing of the problem if my hypothesis about your problem is correct. The problem is one of the frequently reported printer problems.

  Don't forget to tell me the version of Adobe Reader, you?

• Error in the driver for the new DVD player,

  The SATA DVD drive is nine, works of a system boot when I put in a windows install disc and do a start up cold, but drive does not work to complete startup. Got update driver and same driver deleted and reloaded, still does not work, contact manufacturer (Memorex) not much help from them other that telling them that this is a conflict of microsoft. Checked the settings of currency, system error Code 39 in the properties of the device such that the system does not recognize the reader cannot understand cela one, seems to be a software conflict but do not know if this is another driver or Vista conflict causing the error code. Flat, system does not recognize the drive. After running the driver update you get a msg saying the system thinks that the best driver is already installed.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Backup error Windows - the volume for a file has been changed outside...

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  I had this error with Vista n now with 7 and killed a few cd trying to figure out.  I get the error even if the CD is formatted first or not.  However, I can't get my backup to run.

  Any ideas?  Or any step-by-steps that I should try?

  Hey QEDDave

  It's an instance of vista installation

  Read how to back up vista on the link below

  http://www.vista4beginners.com/how-to-backup-your-data

  Get to know windows 7 below

  http://www.Microsoft.com/Windows/Windows-7/features/backup-and-restore.aspx

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  and here's the forums windows 7 for you to repost in

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Walter, the time zone traveller

• Short WAT Kapov - error with the client for a Web site certificate

  Hello

  I'm new to the WAT of short component and I try something.

  Whenever I enter any website URL, it throws this error indicated in the screenshot.

  I read WAT usage guide that says to add the SSL Web site certificate in the folder ' certificates/server '.  I still get the same error.

  Any help would be appreciated.

  Thank you

  

  If you need a proxy server and you have not defined a, try to set a proxy server.

• The EBS for 12.2 Setup error

  Hi all

  Had this error:

  NER the /u01/oracle/VIS/11.2.0/admin/ Log file VIS_ebs/diag/tnslsnr/ebs/screws / Alert/Log.xml

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server)(PORT=1521)))

  Summary of services...

  Service 'SCREW' has 1 instance (s).

  Instance of "SCREW", status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  addlnctl.sh: exit with status 0

  addlnctl.sh: check the /u01/oracle/VIS/11.2.0/ log file appsutil/log/VIS_ebs/addlnctl. txt for more information...

  change ebs_logon trigger: DISABLE

  InstallAppNode2: Please see the remaining newspapers on the applications node secondary to the - / u01/oracle/SCREWS/fs2/inst/apps / VIS_ebs/logs/02061816.log

  
  

  Here are some excerpts: he failed the T2K session:

  Installation 10.1.2 remedial tools.

  With the help of /u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/xmldocs/instToolPatches.xml

  L'exécution de commande : /u01/software/ebs/stage_R12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/u01/Oracle/vis/FS2/inst/Apps/VIS_ebs/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/u01/oracle/VIS/fs2/EBSapps/appl/admin/VIS_ebs/-Doracle.apps.fnd.txk.runtime.config=/u01/oracle/VIS/fs2/inst/apps/VIS_ebs/temp/xmldocs/instToolPatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: FileSys OS COMMAND Failed: output = 2 see Journal for more details. CMD = make-f ins_forms.mk sharedlib installation # node = NodeId = 1103 Type = TypeName = filesys_patch_action name = RefId = 457 24 State = init ConfigDoc = APPS_C_HOME ParentDoc = null topology = R12 Action = os_cmd

  at oracle.apps.fnd.txk.config.FileSysPatchActionNode.doFileSysOSCmd(FileSysPatchActionNode.java:169)

  ************

  any way to restart or to clean and to make the installation process again after cleaning?

  
  

  
  

  
  

  
  

  Please check the following logs for details about the error.

  /U01/Oracle/vis/FS2/inst/apps/VIS_ebs/admin/log/ApplyAppsTechStack_02062027.log

  /U01/app/oraInventory/logs/installActions2015-02-06_06-52-20PM.log

  Complete set of newspapers can be found in (troubleshooting quick install for E-Business Suite version 12.2 (Doc ID 1378579.1)).

  Thank you

  Hussein