Is this a good product?

Similar Questions

• I think switching from Windows XP to Windows 7, but it seems complicated. Is this a good idea?

  I want to get rid of my security Computer Associates software. It overload my system.

  I believe that a combination of Windows 7 and Microsoft Security Essentials and Web of Trust would do a good job.

  Switching from XP to Windows 7 seems complicated. Is this a good idea?

  I would appreciate any advice. I am a former novice

  Thank you

  Get rid of CA security software and do general maintenance on your system would probably go a long way to improve your computing experience.  See help! My computer is slow!

  Unless you plan to buy a new computer with Windows 7 pre-installed, make sure that your hardware is compatible with Windows 7 (for the most part, this means that Windows 7 drivers are available; problems are more likely to occur with older laptops).  Download and run the Windows 7 Upgrade Advisor.

• Is this a good practice if oracle home is installed under / opt directory?

  Is this a good practice if oracle home is installed under / opt directory?
  Appreciate any suggestions.
  
  S.

  PL post OS and database versions. You can install in any directory you choose - recommendations are documented - http://docs.oracle.com/cd/E11882_01/install.112/e24321/appendix_ofa.htm

  HTH
  Srini

• Is this a good model?

  Hello

  I work with a team to create an application that can acquire data of up to 24 channels of thermocouple.  We plan to create an Assistant to help the user to set up the test (specifying stop conditions, frequency of sampling, sample channels, output file and email/text notifications).  After installation, if the user cancels, then the program continues.  We have defined parallel loops and their roles, trying to fit into a design of producer/consumer model.  I've attached the main file that shows the structure of the program.  We try to keep it clean and modular.  Before diving into development, we are finalizing a detailed design specification so that different people can work on each of the loops subvis.  I was hoping that people could review the block diagram and offer suggestions to improve or validate that we have chosen a good method of implementation.

  Notes on the block diagram

  The plan focuses on the terms of the judgment to be detected by the notifier of the event, managed by the main user interface event of data and then the data collector is loaded to stop (as well as the loop main user interface).  When the data collector stops, it releases the queue, the queue reference becomes invalid, and then loops with the Dequeue will be stopped.

  I don't know if a structure of additional event should be in the DataCollector to run specifically on the UI, the Stop button, because if it's in the structure of the Main UI event, the DataCollector would not be stopped immediately.  It is important to stop quickly because the sampling rate can be VERY long.  I understand how to use a structure of the event instead of waiting FOR him, but did not know if he is an effective way, letting down in the structure of the Main UI event...?

  Collecting data is the producer, it currently does not collect data and passes.  If the program must contain a start button from the collection, or put in pause/resume, I need to know how to handle this with the structure of the main user interface event.

  Event notifier consumes data from the data collector.  It examines all data and must set a flag if a stop condition is met.  The flag will be provided by the structure of UI main event of data collector to stop saying.  The notifier of the event has also sends a notification to the appellant to e-mail/text when thresholds have been exceeded to justify a reason for the user to be notified by text or e-mail.

  Email/text calling waiting for notification and calls a Subvi to send an email or a text with some data and channel information.  The Subvi call is long, we decided to put it in its own loop instead of a structure of matter inside the event notifier.

  Report generator saves all the data in a file.  A second line was used, but uses the same data as the first.  What's the correct implementation because the two consumers need the same data?

  Main UI - manages the change in sampling frequency, possibly the stop button, possibly start/pause/repeat on data collection.  Manages also during the event notifier sets the indicator of a stop condition, which should then provide a mechanism to stop the data based on the data collector.

  A big question I have is... The structure of the event hand UI should just be in the data collector so that the loop can be stopped immediately?  All the events of the UI (stop button, start/pause/repeat data collection) directly perform the data collector.  The data collector should have a state machine instead?

  I think that the loops 3 consumers (event notifier, Email/text calling and generator of reports) seem like a good implementation, but I'm not confident in the collector of data and user interface main loops.  They should be combined?

  A few thoughts:

  Overall it seems achievable - don't forget to name your than us and Notifiers-then you can depop the BD and launch each loop in his own subvi without wiring all queues between the loops-Just get to the queue named ref.

  "Data collector" needs a supervisor to control how many times the data - I think a manual with the States 'init-collect-stop. "  A simple timed loop could produce the "time to CQI ticks" under the control of the control rate sample. This puts both the DAQ init and cleanup functions in paying the collector of data so that it facilitates the coehesion and solves the output without waiting for the loop to iterate.

  I'm not a fan of duplicating data - I guess that analisys is pretty much just a few comparisons - so it is fast enough - why not add summary data to the same queue? And making a single item queue - the loop of report can then inspect the queue and are looking for a summary 'index' - if its bigger than the last written index add the darn data to the report?  The preview queue works very well for these situations.

  Do not combine the handeler UI with something else! You see the problem?-Tip: here thar be spaghetti.  Keep it separate solid code maintainable and scalable functions.

  One last thought: his becoming less popular to stop loops about the error of a dequeue.  First of all, it returns a default item that may cause your headaches listeners.  Then it doesn't allow you to run a cleanup code.  Use a stop command embedded in the data of the element as a senior to determine when to stop.  We will try to get the updated samples to display current best practices.

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Driver Detective is a good product to use

  Why is all an attempt to remove detective driver? Updating device drivers?

  Hello

  To add a bit to the excellent advice of Dena B.:

  Case of failure of these auto-pilot programs they fail spectacularly. Preferable to update the
  drivers manually if necessary.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

• Is - this Windows 7 product key is legitimate?

  Dear Microsoft Activation Support,

  Windows Update suddenly stopped working properly on a home-built computer a local technician for me, although it works very well for the last 10 months ('Successful' for each of the elements of update, many showing each month).

  Now, history shows mainly "down" sometimes an update or two would show "Successful" for a few minutes but then when I rebooted, it says that Windows Update was never performed on the computer and my story disappeared, including all those in the past 10 months.  And a few times he says that Windows Update never "checked for updates" even if I "Check for updates" minutes before, in fact, several times!  Windows 7 works, my programs work, it's just that Windows Update does not work and I know how it is important to have my operating system up-to-date with the most recent bug fixes and security enhancements.

  So I took it for repair.  He said I had bad RAM and it "replaces the RAM" and also "installed Windows 7 from scratch."

  When I'm back, the computer, I have re-installed all my programs and all my files.  Windows Update seems to work very well.  Then, a few days later, I checked 'Computer, properties' and he said '1 day until Automatic Activation '.  Not wanting to wait until the computer has stopped working, I clicked activate now.  He asked for a product key.  I do not have a Windows 7 DVD of the person who built my computer, so I have no product key.

  I called him and he said "don't worry, this is a volume license" and that it connect to my computer and enter it.

  I allow it to connect to my computer via www.mikogo.com and he entered this product key (I recorded the session, so I have verbatim):

  {deleted} - C6D4Y - 88272-RMCVY

  This key does not activate.  I looked at he chose "Use the telephone system automated to enable" - but I don't think he had enough time to do step 1, which is to dial a toll-free number, then enter (or say) all numbers shown as an installation ID (which are the 9 sets of numbers, 6 numbers in each set, for a total of 54 numbers) and then get an automated (or human) response.  In fact, I think he may have used a KeyGen or Crack to get the Confirmation ID because it has worked pretty quickly and it all happened very quickly.

  This is the ID of the Installation as described in step 2 of the activation of the phone screen:

  021924 056495 544131 443023 282893 687975 860856 650265 516524

  Here's the Confirmation ID, he entered the boxes A - H on step 3:

  482552 493453 408064 268814 022305 809576 427370 040231

  Windows is, in fact, now enabled, but now I have my doubts.  I wonder if my Windows 7 is genuine and properly active, or if I have sort of a pirated copy is likely of me who-knows-what kind of problems in the future.

  I called Microsoft and they said I should post the details on this website and that Microsoft would confirm within 24 hours if the above key (the so-called "volume license") and/or the Confirmation ID are legitimate or not.

  Thank you in advance, Microsoft, for your timely response.

  According to your report, the operating system is allowed and all removed ok.

  Partial product key: RMCVY
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 28/09/2015-19:01:31

• good product selection

  Hi all

  I develop the user interface for industrial refrigeration. I was wondering what app in the suite creative cloud was that good to do this. In the past, I've used QT design, but now I need more powerful tools. What I appreciate in the design of the interval QT has been the ability to configure the dimensions of the window of the pixel dimensions. Pixel must be rectangular and QT automatically calculate the size in millimeters. This feature, which I was not able to find, for example, in illustrator.

  Could someone help me in this choice?

  Thanks for your help

  Manuela

  I'm not. As long as you design in pixels, realworld units have no meaning. The rest is simply a matter of the ppp settings applied to documents. Read the help files on how to implement.

  Mylenium

• Is this a good software to draw designs of fashion plate

  HI have no computer, only my iPad air2.

  and I would like to draw mode flatdrawings

  What is a good software to use?

  Annelie salvation,

  I think I wrote you with feedback in application (you wrote through the application of the model), but just in case... I think that the draw could work for it. If "mode flat drawings" are what I think they are.

  The only problem, if you have a computer, would export to high resolution, but if this isn't a concern, I think that the tools would be good for what you are doing. There are also sketches Photoshop... it has excellent tools pencil and pen.

  Sue.

• This download of product came as "Adobe extractor.  This doesn't seem fair, and I can't understand how to install lightroom.  Help?

  bright room purchased, downloaded form adobe site license, but the download came as an extractor 'Adobe '.  IS this good?  If Yes, how can I retrieve it and if not where can I get the right file?

  Thank you all

  I discovered that the file I downloaded is an executable, but is misnamed.  Once the file extension is changed to .exe, it will run and install.  No mention of what I noticed.  SMH

• This pretty good computer for my editing needs?

  I will get a new computer for video editing.

  I make recordings of gameplay for various games on the PS4.

  My other computer is suitable for audio production, mixing and mastering.

  This one will be for recording (using the software and device of capture of game) and editing the videos.

  I do not use many effects, mainly color corrections and some time remapping using Twixtor or inventory features.

  I use Premiere Pro CS6

  I record using the Elgato game Capture HD60 (H.264 encoding)

  This unit connects to the PS4 for passthrough your computer, which includes software that control the device is installed on the computer and saves the gameplay.

  Care and information: bottom of the page from bestbuy

  http://www.BestBuy.com/site/Elgato-game-capture-HD-60/7634008.p?ID=1219285525278

  Also, the current site: https://www.Elgato.com/en/gaming/game-capture-HD60

  Here is the computer:

  http://www.Amazon.com/Dell-X8700-3130BLK-XPS-desktop/DP/B00K0HMX3A

  I would also get 4 years protection plan.

  • 3.6 GHz Intel Core i7-4790 Haswell CPU
  • 16GB 1600 MHz DDR3 RAM
  • 7200 RPM 2 TB hard drive
  • NVIDIA GeForce GTX 745 4GB GeForce GTX 745 (OEM) | Features | GeForce
  • Bluetooth 4.0 + 802.11b/g/n Wi - Fi
  • DVD SuperMulti burner
  • 6 x USB 3.0 / 4 x USB 2.0 Ports
  • Audio integrated 7.1
  • Windows 8.1 (64-bit)

  More plug computer in depth:

  http://www.bhphotovideo.com/c/product/1059535-reg/dell_x8700_3130blk_xps_8700_7_i7_4790_16 gb_2tb_windows8_164_black.html

  Also, these slots plug / available do not allow for the addition of a Solid State Drive? Can't find any information on places available...

  Here's the deal: the GTX 745 will be the factor limiting in this PC, assuming that you add an SSD. However, without knowing the case where the PC is assembled in, some OEM cases have only one internal drive Bay which limits the whole system to just one OS disc and no disc storage internal. That severely limits scalability.

  And the GTX 745 is much slower than the GTX 750 for two reasons:

  (1) it is an OEM only version paralyzed from the GTX 750 with only 384 CUDA cores (against 512 CUDA cores in the GTX 750);

  (2) it only uses DDR3 memory instead of the 750 GTX GDDR5 memory, and so the flow of memory is a crummy 28.8 GB/sec instead of 80 GB/sec of the 750 GTX. And I recently tested a GT 730 with GDDR5 memory to give you an idea of ugly about how the GTX 745 will occur.

• Is this a good architecture.

  So, I tested the app that I'm building for weeks and tablet that he shifted a little bit on some parts.

  I started the optimization of the application.

  In the main class I create all the objects that will appear in the application and instead adding childs, I'm trying to change their visibility.

  Also with this change, all the objects take interactivity into account.

  So my question was... it's a good way to build a better application.

  Also note that there are many classes with many objects involved.

  What are objects? What kind of images you have and how you apply? Bitmaps are much faster to display that vectors however some vectors using less memory. You never want to 'too much' happening at the same time. Do your best to plan transitions of phases, especially if you want it works well on the iPad1. I often find myself with transfer techniques to increase the performance of the vectors then you might consider this path. Finally, make sure that your client is running an optimized final version such as Ad Hoc. A fast publication is not in the same way optimizing and runs generally slower because it contains debugging functionality. Always test on the aim low. If you need to run on an iphone 3gs or an ipad1, make sure that you have one to see the performance. iPad1, 2 and 3 as well as the iPhone 3GS and iPhone4, etc are all very different in performance.

• This is good news?

  If a database contains the following statistics:
  

  No. of Queries         Avg      Std Deviation
  134744                  0.14     0.19

  .. masse you consider that good or bad?
  
  What I want to come, it is that the average time required to execute 130 000 queries + is very good for us: 0.14 seconds, it's more than enough to keep users happy. But a gap of 0.19 on this sample say you the "0.14 ' is a fairly reliable way, or you are likely to get a month of Sundays only?
  
  Another database of reports:
  

  29247     0.266     0.9

  It of a worse average (although everyone is still happy with 0.26 seconds), but the standard deviation of 0.9 means it is a much less reliable than the other result means? Is it possible to quantify how much?
  
  Sorry: it is not a question of database, but one statistic, but if someone could explain how to spot a gap 'good' or 'bad', and when we move to another, I'd be fascinated! I've read the stuff of Wikipedia on the variance and its square root (standard deviation), but I do not understand how theory translates simple practices. I should have paid attention in math class, I guess...

  First things first: the "unit of measure" a deviation is the same as the things being measured in the first place. Then your numbers say that your query has an average speed of 0.266 seconds, with a standard deviation of the average of 0.9 seconds.

  Second, statistics tells us that if the data are normally distributed, you can expect at 95% of the results of 2 deviations average types. In other words, 2 * 0.9 = 1.8, then numbers suggest 95% queries on your system last between 1 and 60 + 2.0 seconds. It's a second four distributed around an average of only 0.266 seconds.

  This is a big gap, perhaps, but not as big as in your old system, where your figures suggest queries took 4.5 +-(2*4.8) =-5,1 + 14.1 seconds. It is a bad medium to begin with (assuming it is the same data as your new query manages to extract in 0.3 it only takes a second), but it's also a very large 20 seconds spread around average... which means the old query run very unpredictable.

  (By the way, is the fact that your broadcast involves some queries returned until they were submitted which suggests your data have a tilt!) I'll make a heroic assumption that your recliner is the result of only one or two queries really bad, however and a plough on despite everything!)

  We can't know that if a 0.2 second query with a gap of 4 seconds is good enough for your application. If the query is used to power a Web site, for example, a waiting 4 second may be just about acceptable. An average of 4 seconds with a gap of 20 sounds pretty bad, though.

  On the other hand, a second 4 spread is 15 times the average 0.26, while a second 20 distributed is only 5 times 4 seconds on average. Your new query is, proportionally, more unpredictable in performance than the same old if the old one was just predictable bad! I wouldn't worry, however: when you're dealing with very fast queries, even slight variations may look relatively bad, but waiting instead of 0,2 0,4 seconds is still a better result than to wait 8 seconds instead of 4!

  Anyway: I'm not Statistician and my analysis of your numbers can be completely wacky, but you raise an important point which is that we need to know what is an average middle - and how to spot a bad to a good, regardless of its absolute value - when doing things like optimizing the performance. I may set up a more thoughtful piece of blog to discuss the issue. I'll let you know if I do.

• USB 3.0 64 GB - is this original Toshiba product?

  Hello

  Recently, I saw this: toshiba 64 GB usb 3.0 USB key

  But the bulb is different from the one on your web site.
  What is original or fake China?

  Is all possibilties to check by myself and how?
  Best regards

  I don't have it, but I think that it is not fake. It is also available on Amazon. Part number is PFU064U-1BCK.

• this sweet Microsoft product key behind the back of the laptop not working not

  Hello

  The product key is behind my laptop don't is not accepted in ms office 2010, I formatted and after putting the key does not work... help me

  Your system is shipped with Microsoft Office 2010 (trail) that the version of 30 days or 60 days. I don't think that Microsoft still offers the trial version.