Similar Questions

• Contacting palm to see if palm pre developer mode to the guarantee

  Have an e-mail address for palm to contact them. I really don't want to pay this question and I found a chat irc for palm room, but no one is, never. I looked up and down but still nothing.

  It does not void the warranty. I have my pre in this mode as well. Basically make it so you can install beta apps that you create or if you test a developer it allows to install it and test it.

  Also if you do a partial erase on the device it removes it developer mode if this is the cause of any technical problems you may have with the device. More so, just like you got the unit out of the box.

• I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do?

  Hi guys, I get the blue screen in the LR development mode, even though I have updated the driver for the graphics card on this new laptop. It's an AMD Radeon R5 M335 4 GB memory DDR3, core i7 6th gen processor. What should do? Thank you

  This Eizo has a normal resolution of 1920 x 1200 pixels. I expect not to see a lot of benefits of using the GPU. You really see the advantage to screens that are at least 4K (3840 x 2160 pixels) or more. On small screens, you can see some benefits with smoother updates if you ONLY use the base sliders to develop. If you use brushes, turning on the GPU can actually slow you down a bit. In most cases, loading images in develop is also slower when you activated! There are a few illustrative notes to an engineer from Adobe that you can read here: notes for Lightroom CC GPU (2015) in order to better understand what is happening. Currently, in most cases, I recommend leaving off the coast. I think that Adobe is trying to improve and have more cards supported, but it is not yet completely there.

• Chromebox: developer mode chromebox

  I recently bought a HP chromebox to use a kiosk application. However, to completely install the kiosk application in the way I need to, I need to switch to developer mode.  In accordance with the instructions that I have to

  To call the developer/restore mode, you insert a paperclip and press the RESET BUTTON (just beside the kensington lock) and press the power button. Release the RESET BUTTON after a second.

  Mode Dev first call you the recovery and to the recovery screen, press Ctrl-D (there is no prompt - must be made). It will ask you to confirm by pressing the reset BUTTON again.

  Dev-mode works as always: it will show the scary start screen and press Ctrl-D or wait 30 seconds for initialization.

  However, when I do this the box does not send any video signal to my HDMI screen so I am completely in the dark as to what is happening, if anything. I tried with a wired USB keyboard and a USB wireless keyboard, same result: nothing seems to happen.

  Who has an idea to switch to developer mode on thisHP chromebox? (Not a chromebook)

  Hi @StephanvR,

  Steps performed by you to switch to Dev Mode seems to be OK.

  As you mentioned that you have connected the display via HDMI and there is no display.

  Therefore, you can try to connect to display Port (DP) and check if there are any screen.

  I hope that answers your question.

  I am an employee of HP, the views expressed here are my personal opinions, not HP.

  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

  Click the "Thumbs up" button to the left side of my post to recognize the message *.

• Not able to run standalone LabVIEW RT application cRIO (works well in development mode)

  Strange question.

  I'm trying to deploy an application of RT to a controller for cRIO-9074.  I developed the application in development mode and everything works and seems to be being debugged.  However, when I try to build and to deploy the application as the startup, the application seems to start running, then stop cold (based on the CPU usage as described in the Distribution System Manager OR).  At this point, I can't debug because the application is stopped (no updated variable).

  The problem seems to be related to the NI_AALPro.lvlib library, because if I turn off the function polynomial evaluation, the code will compile and start fine.  I'm tempted to recreate the necessary functions and create my own library, but I prefer to find the problem and fix it rather than re-create the wheel...

  Is it possible that the library badly uploaded to the controller?  If so, is it possible to force the appropriate library to be transferred to the controller?

  Thanks for any help.

  Toader,

  Thanks for the reply.

  I think I solved the problem.  For some strange reason, the functions inside the NI_AALPro.lvlib were not available on the cRIO at run time when the application tried to run in stand-alone mode.  I ended up adding the library to the section to always include the source files tab in build specification and the program runs now.  I'm not sure what it is, but it works.

  Thank you Morgan of NOR.

  Kind regards

  Big Ev

• development mode

  When setting in development mode Simulator a screen showing an IP address where the two first two tokens are attached to the 169.254 and there are som of choice for the next two chips. This IP address does not appear to be a report any with the IP address of the device. His IP address is 192.168.56.129. And nothing to do with my IP of the computer that is 192.168.10.54

  What it is? This who should I put it?

  The 169.254 is for the USB interface, but you can set one or the other as the debug ip in the properties of the device. I have the two together in mine and just add a suffix USB and WiFi in the name so I know which interface to connect to. Its useful for when you don't have a wifi network to connect to.

• Z10 blackBerry development mode

  Hello!

  When I go into Settings/Security/Development mode, I can:

  • activate this,
  • specify an IP address for the development,
  • install a token "debug".

  (if I translate well to the french).

  Could someone tell me more about these options?

  Is there a security problem if I try and install the debugging token?

  The token lets connect you the phone via ssh (among a few other things.)  You don't always have root access on the same phone with installed.

  With mode on you can sideload apps debugging, but they must always be signed (by someone with a BlackBerry Developer certificate, which could be you.)  Without development mode on the phone will not allow direct loading of applications via the interface USB at all.

  For purposes of sldeloading, there is no need to install the debugging token.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Twisted colors in Lightroom development mode

  When I want to develop my photos in Lightroom develop mode of that all the colors in the image are bent upward. See the screen capture below:

  

  I struggled a while to figure what's wrong without success.

  Those who know how to solve this problem?

  Is this LR 6 / CC 2015?

  Disable the GPU acceleration: Adobe Lightroom GPU troubleshooting and FAQ

• My pictures as soon as I switch to 'develop' mode completely to chance

  I'm fairly new to Lightroom and I would love to work with her, but I have no idea of what is happening to my photos. I've seen a lot of tutorials and find out how to import a picture and what I can do with the mode of development. But as soon as I import one of my photos (JPEG format) and go to "develop" - mode, my picture is kind of screwed upward and I don't know what to do. I tried it with pictures of external hard drives, as well as with the photos on my laptop. Also, I closed and restarted my laptop, but it's always the same.

  

  It's the photo I just imported into Lightroom. So far, everything looks good. But as soon as I push the button "develop" in this case: "."

  

  Why my picture than elsewhere when I try to change it and how can it change so that I can actually see my photos with the original colors?

  I hope I can find someone who can help me. Thank you very much!

  Looks like a problem with the communication of hardware acceleration with your video card.

  menu / Edition / Preferences / performance

  Uncheck the box "use the graphics processor.

• Adobe Lightroom develop Mode question

  The guys, please someone can help me get rid of this problem? Once I open the image in develop mode it is is messed up with this effect and I do not know where to go this coming end.

  

  Go to Preferences, click the performance tab, and then clear the check box

• Strange display in develop mode

  In the library, I can see photos in a normal life, developing mode I get a very strange (see photo). What can I do to fix this?

  

  Clear the option use the GPU in LR. It is on the performance of the LR preferences tab.

• RAW of Nikon D810 images appear darker after importation develop mode - why?

  Hello

  I have a problem with the LR. I shoot in raw, and after copying the files on my pc, I choose several pictures and import them into LR. After this step, I want to continue with the mode of development. Subsequently the following problem: the image in the develop mode has changed - it's much darker and the colors aren't the samet. Even if I change the example flat camera mode I get the same resuslt as the original raw file. I do not understand the problem - maybe you can help me?

  Thanks in advance

  Jurek

  Camera: Nikon D 810

  LR version 5.7

  The color space, running on the development module and the library module is completely indifferent to what looks like your image. It is not serious, and the difference is extremely subtle and really visible only on the screens of the range very high-end. In addition, color space in develop is not prophotoRGB, it is once again a linear gamma with primary prophotoRGB but space called MelissaRGB which is quite different, not important for this.

  He must know one thing more to diagnose your problem: when you return to the library, the images are dark or do they go back to the Lite version? If so, you are dealing with several possibilities. The first is as already mentioned a monitor profile. You should re - calibrate your monitor with hardware calibration. If you don't have that, test that possibility by assigning the sRGB profile to your monitor in the monitor properties pane. If this fixes it, you must get a puck of calibration to calibrate your monitor, the problem is caused by a bad monitor profile that has been installed by an update of the system. These are very common on the windows platform and even if other applications behave normally, that is the question.

  Second option is that your graphics card is not dealing with well GPU acceleration and omitting the color management. Test by going in the Lightroom preferences, selecting the tab performance and power of the graphics card acceleration off. Restart Lightroom and check. (update: I see that you are on LR 5.7: this option does not exist here so ignore this notice)

  If none of these fix the problem, and after that you spent to develop, the image is too dark in the library, that several other issues could occur. First is that you may have set a default value for the camera. Make sure the settings are zero on your images after importation. They could be zero if you apply a preset to the importation, or when you set a default development setting. Reset it by going to preferences-> presets, and then click 'reset all settings default development. " You see the change of the image when you go in develop because the library, firstly the jpeg preview the generated camera is shown and only when you are going to develop is the actual raw image get rendered by Lightroom.

  Another issue that could happen is that you use dynamic lighting on your camera modes. Nikon calls these active D-lighting. You must completely disable those. What the camera does when you have those active is to underexpose the image by a stop or two and then highlights the tag of the raw image with an indicator that shows the Nikon software to increase exposure compensation and make an HDR processing on the image to trigger shadows and bring down. Lightroom can not read these tags and just makes the image from raw data (which are underexposed!). In the library first see you the jpeg in-camera image and that the image was made by the camera using the HDR technique. You are better expose properly and leaving these modes if you want raw data of highest quality.

• CC of Lightroom is stuck in develop mode

  When I click on LR CC for the throw, all first library mode begins to come toward the top and then he passes to develop mode where it hangs up automatically and won't do anything else.  What is going on?

  Hi colrehogan,

  You must disable GPU preferences in Lightroom.

  First you must reset the Lightroom preferences.

  Steps to follow:

  Stop Lightroom.

  Navigate to the preferences file:

  Mac OS: /Users/ [user name]/Library/Preferences/com.adobe.Lightroom6.plist

  [Windows 7, 8: C:\Users\[user name] \AppData\Roaming\Adobe\Lightroom\Preferences\Lightroom 6 Preferences.agprefs

  Rename the file from Lightroom 6 Preferences.agprefs.old preferences

  Now, when you launch the Lightroom it will open on the library Module.

  Go to the editing Menu on the top of the page (Windows) Menu / click the Lightroom on top (Mac)

  Click on preferences

  Go to the performance tab

  Disable the GPU there settings.

  Restart the Lightroom

  

  Let us know if this can help,

  Kind regards

  ~ Mohit

• LR 6 CC - Photos made differently in library vs develop modes

  I have a collection of B & w photos. The photos seem almost tonic in library but correct appearance in develop mode. Blacks have disappeared.

  Does anyone else know this?

  I have not watched too closely to color photos yet.

  I went into the management of colors for my monitor and deleted the profile associated with my Samsung Monitor tab. That fixed it. I don't understand why he did it and why LR5 seemed ok but it fixed the problem. I do not recalibrate.