Z10 blackBerry development mode


When I go into Settings/Security/Development mode, I can:

  • activate this,
  • specify an IP address for the development,
  • install a token "debug".

(if I translate well to the french).

Could someone tell me more about these options?

Is there a security problem if I try and install the debugging token?


The token lets connect you the phone via ssh (among a few other things.)  You don't always have root access on the same phone with installed.

With mode on you can sideload apps debugging, but they must always be signed (by someone with a BlackBerry Developer certificate, which could be you.)  Without development mode on the phone will not allow direct loading of applications via the interface USB at all.

For purposes of sldeloading, there is no need to install the debugging token.

Tags: BlackBerry Smartphones

Similar Questions

  • Z10 blackBerry airplane mode

    I have a 100-1 STL Z10 and cannot set off airplane mode

    All the ideas!

    I just updated my software (I was invited to update software) and versions now...



    Airplane mode now works

  • BlackBerry 10 password remove for development mode

    Is it possible to be in development mode and have not created a password? Z10 is my primary phone, and it annoys me that I have the password on every time I'm in development mode. I'll be in dev without password mode? It would be a little easier my life

    Hello BojanKogoj,

    Thank you for your question. There is unfortunately no way to support to have your device in development mode without having a defined password.

    Let us know if you have any other questions.

  • Z10 Z10 BlackBerry blackBerry problem

    Hola amigos, he estado en este foro desde than put tapeworm anteriores con equipos SO 5.0 y 7.1, bueno, pues ahora he defined por a BlackBerry Z10 el cual the explico:

    A mi me lo nuevo mi tio lo uso regalaron y probo por lo 2 dias y puso contrasena y blackberry ID y el equipo is tapeworm SO 10.3.2 stink there is activo funcion antirrobo, al hacer a borrado del equipo al forzado no tener the contrasena, me pedia BlackBerry ID el cual mi tio lo creo el con @gnail in @gmailvez.

    Entonces decidi usar el Método remove anti-theft y fixed el problema, pero veo as el equipo tiene muy few applications, solo como 8, me dijeron as debo fornuis via OTA is that ahorita tiene el SO wont developer pero en el celular works so well.

    Pero los details than the he hallado are:

    * The majority of the apps android no lo is our (Whatsapp, FbLite, Instagram, Opera Mini, Candy Crush etc.).

    Tengo el SO, so intento volver has charged el mismo SO me vuelve a activar el antirrobo y no puedo each.

    * El equipo is calienta a poco (los en normal blackberry).

    Me so no tengo acceso para fornuis Wifi! Espero me help thanks!


    Hello friends, I have been in this forum because I had my previous teams with OS 5.0 and 7.1, well, because now, I chose a Z10 BlackBerry which I explain:

    For me that my uncle gave me new use it and tested for two days and put the password and blackberry ID and hardware already had OS 10.3.2 and as the anti-theft function is active, to do a removal forced the team's do not have the password, the BlackBerry ID pedia me as Uncle @gnail believed him instead of @gmail.

    So I decided to use the method remove anti-theft and solved the problem, but I see that the team has very few applications, like 8, told me I need to update via OTA because now you have installed the OS developer but if the phone works fine.

    But the details I found is:
    * More android apps do not open close (Whatsapp, FbLite, Instagram, Opera Mini, Candy Crush etc.).

    OS me, if I'm trying to reload the OS activate even me again the burglar and I can not use it.

    I recommend that I have no wireless access to day! I hope to help me and thank you!

    Solved! Thank you!

  • Can't stand z10 BlackBerry applications JAVA MIDP 2.1?


    I would like to know whether or not the new Z10 BlackBerry device supports JAVA MIDP applications.

    When I checked GSM ARENA for the specification of phone, I could see that it supports JAVA MIDP 2.1 apps. I need to confirm, because I am also a developer of BlackBerry by profession. So this might help me to develop applications in JAVA - programming language that I like the most.

    Any information on this matter is highly appreciated.

    Thank you much in advance.

    Brahim Salim

    the Z10 does not support java applications.

    with the exception of android applications that can be run in a runtime (but have not access to many API).

    I moved to + native waterfalls, so big c ++, made a little easier by Qt, which is much more similar to java by structure. It took me about 2-3 months to get productive with it (while developing java applications, it is so much shorter if you invest more time).

  • Password blackBerry BlackBerry Developer 10

    I bought a second hand Z10 and I assumed that it existed it seems, so now I installed contacts apps etc and giving side load android applications on my phone, but I have reset goto enable developer mode and enter a password, but there is already a.

    Now, I could have put a messing around but I would probably not be forgotten, anyway around it or reset?

    Thanks in advance

    It would be the same as the main security password on the device. Do you know what your security password?

  • Turn on developer mode in ipad

    How to enable developer mode in ipad. I am a developer, I need to test apps I wrote in xcode need help

    Hello theKelvs,

    What have you tried so far? I think that you just plug in your device and run.

  • Chromebox: developer mode chromebox

    I recently bought a HP chromebox to use a kiosk application. However, to completely install the kiosk application in the way I need to, I need to switch to developer mode.  In accordance with the instructions that I have to

    To call the developer/restore mode, you insert a paperclip and press the RESET BUTTON (just beside the kensington lock) and press the power button. Release the RESET BUTTON after a second.

    Mode Dev first call you the recovery and to the recovery screen, press Ctrl-D (there is no prompt - must be made). It will ask you to confirm by pressing the reset BUTTON again.

    Dev-mode works as always: it will show the scary start screen and press Ctrl-D or wait 30 seconds for initialization.

    However, when I do this the box does not send any video signal to my HDMI screen so I am completely in the dark as to what is happening, if anything. I tried with a wired USB keyboard and a USB wireless keyboard, same result: nothing seems to happen.

    Who has an idea to switch to developer mode on thisHP chromebox? (Not a chromebook)

    Hi @StephanvR,

    Steps performed by you to switch to Dev Mode seems to be OK.

    As you mentioned that you have connected the display via HDMI and there is no display.

    Therefore, you can try to connect to display Port (DP) and check if there are any screen.

    I hope that answers your question.

    I am an employee of HP, the views expressed here are my personal opinions, not HP.

    Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.

    Click the "Thumbs up" button to the left side of my post to recognize the message *.

  • Not able to run standalone LabVIEW RT application cRIO (works well in development mode)

    Strange question.

    I'm trying to deploy an application of RT to a controller for cRIO-9074.  I developed the application in development mode and everything works and seems to be being debugged.  However, when I try to build and to deploy the application as the startup, the application seems to start running, then stop cold (based on the CPU usage as described in the Distribution System Manager OR).  At this point, I can't debug because the application is stopped (no updated variable).

    The problem seems to be related to the NI_AALPro.lvlib library, because if I turn off the function polynomial evaluation, the code will compile and start fine.  I'm tempted to recreate the necessary functions and create my own library, but I prefer to find the problem and fix it rather than re-create the wheel...

    Is it possible that the library badly uploaded to the controller?  If so, is it possible to force the appropriate library to be transferred to the controller?

    Thanks for any help.


    Thanks for the reply.

    I think I solved the problem.  For some strange reason, the functions inside the NI_AALPro.lvlib were not available on the cRIO at run time when the application tried to run in stand-alone mode.  I ended up adding the library to the section to always include the source files tab in build specification and the program runs now.  I'm not sure what it is, but it works.

    Thank you Morgan of NOR.

    Kind regards

    Big Ev

  • Problem with the BlackBerry Developer Site

    We are currently experiencing a problem with the integration of BlackBerry ID with the BlackBerry Developer web site.  This prevents the developers to create a new BlackBerry ID Token, connecting Issue Tracker and Developer area and potentially other areas that require authentication.  Trying to access one of these pages gives the following error.

    Sorry, there is a problem with the page you are trying to reach and it cannot be displayed. Please try again later.

    Teams are trying to solve the problem.  We apologize for the inconvenience.

    The problem has been resolved.  You should now be able to connect Issue Tracker and generate BlackBerry ID chips again.

  • Z10-blackBerry App Data

    If I load a new o.s. on my z10 and before that I did I load my all my pic, music and contact on a sd card. I also did a return to the top with the software link.

    So my problem is that I forgot to game data and data of the application do not forget. I read on this forum below.


    So my question I opened a backup on my pc and just load the game data and remember not only application data. If so where it goes into the BONE

    Thank you

    If this isn't the case, I have to start all over again.

    Hey djanti13.

    Welcome to the community of BlackBerry Support Forums.

    A backup BlackBerry link contains 3 types of databases. Application data, media, and parameters.

    The Data of Application contains data related applications such as game data saved, the local PIM data such as contacts and calendar data (which is stored locally on the BlackBerry, do not live sync) and notes in the application do not forget.

    Media contains a backup of all the images, video and music stored locally on your BlackBerry (not including the SD card).

    Parameters contains the General settings for BlackBerry as UI settings, notifications and email accounts.

    To answer your question; No, you cannot open the data specific restore all files and backup such as Remember application data or parts saved as they are part of the basis of Application data . However, you can select only the data from the Application to restore the backup and omit the media and settings , if you wish.

    I hope that this helps, please let me know if you have any other questions.

    See you soon.

  • Missing development mode

    I have 2 OS. Development mode is missing from my settings option. So I can't connect to Eclips. How to get the development option in the settings. Help, please.

    It should be under settings > Security.

  • Z10 blackBerry please help me

    Please, I have a problem with my z10 blackberry device, whenever I have unplug or m-unit or the battery of my camera time and date will have to be reset before I can't use my device. Please, what is the way out?

    Hendrick says:
    The operating system

    It's all an old operating system two year.

    I would start by upgrading to the latest 10.3.2

  • Search for Email Z10 Blackberry blackBerry Z10

    I'm an end user who has purchased recently a Z10 Blackberry from Verizon. This end user wishes to be able to search Gmail emails using the native client to find emails more than 30 days, but can't. Is there a way to get around this limitation? Really, she love the new feature but will return for and IPhone if not.

    The most characteristic of 30 days is coming, BlackBerry has promised.

    She really should take for her, the Z10 is so much better than the iPhone.

  • Problem to connect/disconnect blackBerry Developer Web site

    When I connect to the BlackBerry Developer's Web site (http://developer.blackberry.com) Safari (6.0.4) on my Mac (10.8.3) a bunch of weird files have been downloaded in my downloads folder. File as: GnCYWDHJWbM, UXEt5tfUEdc, etc...

    The same thing happens when I logout on the developer site.

    Is anyone else facing this problem?

    Although we can say that it is corrected now.

    If someone else has the same problem, however, please let me know.

Maybe you are looking for

  • How can I get an access icloud 4-digit code?

    How can I get an access icloud 4-digit code?

  • Satellite A500 - 17 X white screen at startup by using the power of the battery

    When I boot A500-17 x to the power of the battery, it's get booted up in the background, but my screen is empty. After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life. Ther

  • Satellite A200 start Age of Empires

    Hello world My daughter has a Sat A200 1.8 GHz 3052 available RAM, installed Direct X 10, more older version 9 to run older games. Under Vista Home Premium with an ATI Radeon Graphics Processor 0 chip x 9581 (Mobility Radeon HD) 2600. I get an error

  • You want to update to Windows 8. How can I update now?

    I bought this toshiba satellite used yesterday. The person made records so I could go back to new condition. I did it. So, there are more than 100 updates installed. It takes a lot of time. First he made 1 or 2 at a time. Then he makes about 90 and I

  • How to add a clipping with Photoshop scripts path

    Hi guys,.I make a script that will save me a lot of time in the future with photo editing.When I take a picture of a product, it always has a background. When I removed background, I want a script to load the layer (while the product inside the PSD b