ISE restoration fails after 80% (Segmentation fault)

Similar Questions

• After upgrade to El Capitan, Python segmentation fault 11 after two commands are entered.

  2011 Macbook pro with Snow Leopard (8 MB RAM).  I upgraded to 10.11.4 and now interactive Python (2.7.2) is broken.   After you enter the two commands any (?), it crashes:

  Pauls-MacBook-Pro: ~ python $ paul

  Python 2.7.2 (v2.7.2:8527427914 has 2, June 11, 2011, 15:22:34)

  [GCC 4.2.1 (Apple Inc. build 5666) (point 3)] on darwin

  Type "help", "copyright", "credits" or "license" for more information.

  > > > x = 1

  > > > y = 2

  Segmentation fault: 11

  Pauls-MacBook-Pro: ~ paul$

  I saw the posts here and on StackOverflow, saying that this problem is corrected in python 2.7.6 but I have a few questions:

  one) because it is a problem for a few years, why not upgrade the El Capitan installs a new version of python (if I understand correctly, the El Capitan installation includes)?   :/   For example, instead of everyone made the upgrade (at least in some versions) with the problem individually?

  Given that I apparently must upgrade to python:

  (b) I saw mention of problems with the evolution of the system version of python.   Can I change the version of the system (my preference), for example. 2.7.11, or do I need to install a version for my personal use?

  (c) how DO I upgrad.e the version of the system, or install another version?

  Thank you

  It is not the system Python, which is the version 2.7.10. What you get from "which python"?

• After you install the updates, programs disappeared from the start menu, internet connection fails after leaving "sleep" mode and the system restore disappeared.

  Original title: most of the programs have disappeared from the start menu.

  Family Vista using premium, updates of Windows installed 10/8 then found that most of the programs has disappeared from the start, internet menu connection fails after that out 'sleep' mode and restore Sytstem disappeared.

  Help please

  Hello

  Please see below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/programs-missing-from-start-menu-in-Windows-7/507709ad-EDBB-46e7-AF44-11a64d36b854

  Also, please create a new user profile and see if the problem is there again. If this is not the case, see the following:

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

• Rman cloning (Segmentation fault) error

  Hi all
  
  Oracle version: 10.2.0.1
  Operating system: linux
  
  When we tried to make rman cloning by catalog, we get the following error here my clon database is on a server and my target and clon of database to Server B.
  
  Please find the below error.
  

  [oracle@test1161 ~]$ rman catalog rman/rman target sys/qfund@test
  Recovery Manager: Release 10.2.0.1.0 - Production on Sun Jan 23 22:24:05 2011
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  connected to target database: TEST (DBID=2034916279)
  connected to recovery catalog database
  
  RMAN> connect auxiliary sys/poor123@poor
  
  connected to auxiliary database: POOR (not mounted)
  
  RMAN> duplicate target database to poor;
  
  Starting Duplicate Db at 23-JAN-11
  starting full resync of recovery catalog
  full resync complete
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: sid=155 devtype=DISK
  
  contents of Memory Script:
  {
     set until scn  22564684;
     set newname for datafile  1 to
   "/u02/poor/oradata/system01.dbf";
     set newname for datafile  2 to
   "/u02/poor/oradata/undotbs01.dbf";
     set newname for datafile  3 to
   "/u02/poor/oradata/sysaux01.dbf";
     set newname for datafile  4 to
   "/u02/poor/oradata/users01.dbf";
     set newname for datafile  5 to
   "/u02/poor/oradata/example01.dbf";
     set newname for datafile  6 to
   "/u02/poor/oradata/poorna.dbf";
     set newname for datafile  7 to
   "/u02/poor/oradata/bigtbs_01.dbf";
     set newname for datafile  8 to
   "/u02/poor/oradata/lak_tbs01.dbf";
     set newname for datafile  9 to
   "/u02/poor/oradata/vir2_01.dbf";
     set newname for datafile  10 to
   "/u02/poor/oradata/lak_tbs2_01.dbf";
     set newname for datafile  11 to
   "/u02/poor/oradata/vir_user01.dbf";
     set newname for datafile  12 to
   "/u02/poor/oradata/vir_bigf01.dbf";
     set newname for datafile  17 to
   "/u02/poor/oradata/hrscott.dbf";
     restore
     check readonly
     clone database
     ;
  }
  executing Memory Script
  
  executing command: SET until clause
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  executing command: SET NEWNAME
  
  Starting restore at 23-JAN-11
  using channel ORA_AUX_DISK_1
  
  channel ORA_AUX_DISK_1: starting datafile backupset restore
  restoring datafile 00003 to /u02/poor/oradata/sysaux01.dbf
  restoring datafile 00004 to /u02/poor/oradata/users01.dbf
  restoring datafile 00005 to /u02/poor/oradata/example01.dbf
  restoring datafile 00006 to /u02/poor/oradata/poorna.dbf
  restoring datafile 00007 to /u02/poor/oradata/bigtbs_01.dbf
  restoring datafile 00008 to /u02/poor/oradata/lak_tbs01.dbf
  restoring datafile 00009 to /u02/poor/oradata/vir2_01.dbf
  restoring datafile 00010 to /u02/poor/oradata/lak_tbs2_01.dbf
  restoring datafile 00011 to /u02/poor/oradata/vir_user01.dbf
  restoring datafile 00012 to /u02/poor/oradata/vir_bigf01.dbf
  restoring datafile 00017 to /u02/poor/oradata/hrscott.dbf
  channel ORA_AUX_DISK_1: reading from backup piece /u01/app/oracle/product/10.2.0/db_1/dbs/1pm2tq5e_1_1
  channel ORA_AUX_DISK_1: restored backup piece 1
  piece handle=/u01/app/oracle/product/10.2.0/db_1/dbs/1pm2tq5e_1_1 tag=TAG20110124T124846
  channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:01:45
  Finished restore at 23-JAN-11
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "POOR" RESETLOGS ARCHIVELOG
    MAXLOGFILES     16
    MAXLOGMEMBERS      3
    MAXDATAFILES      100
    MAXINSTANCES     8
    MAXLOGHISTORY      292
   LOGFILE
    GROUP  1 ( '/u02/poor/oradata/redo1a.log' ) SIZE 50 M  REUSE,
    GROUP  2 ( '/u02/poor/oradata/redo2a.log', '/u02/poor/oradata/redo2b.log' ) SIZE 50 M  REUSE,
    GROUP  3 ( '/u02/poor/oradata/redo3a.log', '/u02/poor/oradata/redo1b.log', '/u02/poor/oradata/redo3b.log' ) SIZE 50 M  REUSE
   DATAFILE
    '/u02/poor/oradata/system01.dbf'
   CHARACTER SET WE8ISO8859P1
  
  
  contents of Memory Script:
  {
     switch clone datafile all;
  }
  executing Memory Script
  
  released channel: ORA_AUX_DISK_1
  datafile 2 switched to datafile copy
  input datafile copy recid=1 stamp=741272711 filename=/u02/poor/oradata/undotbs01.dbf
  datafile 3 switched to datafile copy
  input datafile copy recid=2 stamp=741272711 filename=/u02/poor/oradata/sysaux01.dbf
  datafile 4 switched to datafile copy
  input datafile copy recid=3 stamp=741272711 filename=/u02/poor/oradata/users01.dbf
  datafile 5 switched to datafile copy
  input datafile copy recid=4 stamp=741272711 filename=/u02/poor/oradata/example01.dbf
  datafile 6 switched to datafile copy
  input datafile copy recid=5 stamp=741272711 filename=/u02/poor/oradata/poorna.dbf
  datafile 7 switched to datafile copy
  input datafile copy recid=6 stamp=741272711 filename=/u02/poor/oradata/bigtbs_01.dbf
  datafile 8 switched to datafile copy
  input datafile copy recid=7 stamp=741272711 filename=/u02/poor/oradata/lak_tbs01.dbf
  datafile 9 switched to datafile copy
  input datafile copy recid=8 stamp=741272711 filename=/u02/poor/oradata/vir2_01.dbf
  datafile 10 switched to datafile copy
  input datafile copy recid=9 stamp=741272711 filename=/u02/poor/oradata/lak_tbs2_01.dbf
  datafile 11 switched to datafile copy
  input datafile copy recid=10 stamp=741272711 filename=/u02/poor/oradata/vir_user01.dbf
  datafile 12 switched to datafile copy
  input datafile copy recid=11 stamp=741272711 filename=/u02/poor/oradata/vir_bigf01.dbf
  datafile 17 switched to datafile copy
  input datafile copy recid=12 stamp=741272711 filename=/u02/poor/oradata/hrscott.dbf
  
  contents of Memory Script:
  {
     set until scn  22563972;
     recover
     clone database
      delete archivelog
     ;
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting recover at 23-JAN-11
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: sid=158 devtype=DISK
  
  starting media recovery
  
  archive log thread 1 sequence 23 is already on disk as file /u02/archive/1_23_741021347.dbf
  archive log thread 1 sequence 24 is already on disk as file /u02/archive/1_24_741021347.dbf
  archive log thread 1 sequence 25 is already on disk as file /u02/archive/1_25_741021347.dbf
  archive log thread 1 sequence 26 is already on disk as file /u02/archive/1_26_741021347.dbf
  archive log thread 1 sequence 27 is already on disk as file /u02/archive/1_27_741021347.dbf
  archive log thread 1 sequence 28 is already on disk as file /u02/archive/1_28_741021347.dbf
  archive log thread 1 sequence 29 is already on disk as file /u02/archive/1_29_741021347.dbf
  archive log thread 1 sequence 30 is already on disk as file /u02/archive/1_30_741021347.dbf
  archive log thread 1 sequence 31 is already on disk as file /u02/archive/1_31_741021347.dbf
  archive log thread 1 sequence 32 is already on disk as file /u02/archive/1_32_741021347.dbf
  archive log thread 1 sequence 33 is already on disk as file /u02/archive/1_33_741021347.dbf
  archive log thread 1 sequence 34 is already on disk as file /u02/archive/1_34_741021347.dbf
  archive log thread 1 sequence 35 is already on disk as file /u02/archive/1_35_741021347.dbf
  archive log thread 1 sequence 36 is already on disk as file /u02/archive/1_36_741021347.dbf
  archive log thread 1 sequence 37 is already on disk as file /u02/archive/1_37_741021347.dbf
  archive log thread 1 sequence 38 is already on disk as file /u02/archive/1_38_741021347.dbf
  archive log filename=/u02/archive/1_23_741021347.dbf thread=1 sequence=23
  archive log filename=/u02/archive/1_24_741021347.dbf thread=1 sequence=24
  archive log filename=/u02/archive/1_25_741021347.dbf thread=1 sequence=25
  archive log filename=/u02/archive/1_26_741021347.dbf thread=1 sequence=26
  archive log filename=/u02/archive/1_27_741021347.dbf thread=1 sequence=27
  archive log filename=/u02/archive/1_28_741021347.dbf thread=1 sequence=28
  archive log filename=/u02/archive/1_29_741021347.dbf thread=1 sequence=29
  archive log filename=/u02/archive/1_30_741021347.dbf thread=1 sequence=30
  archive log filename=/u02/archive/1_31_741021347.dbf thread=1 sequence=31
  archive log filename=/u02/archive/1_32_741021347.dbf thread=1 sequence=32
  archive log filename=/u02/archive/1_33_741021347.dbf thread=1 sequence=33
  archive log filename=/u02/archive/1_34_741021347.dbf thread=1 sequence=34
  archive log filename=/u02/archive/1_35_741021347.dbf thread=1 sequence=35
  archive log filename=/u02/archive/1_36_741021347.dbf thread=1 sequence=36
  archive log filename=/u02/archive/1_37_741021347.dbf thread=1 sequence=37
  archive log filename=/u02/archive/1_38_741021347.dbf thread=1 sequence=38
  media recovery complete, elapsed time: 00:00:04
  Finished recover at 23-JAN-11
  
  contents of Memory Script:
  {
     shutdown clone;
     startup clone nomount ;
  }
  executing Memory Script
  
  database dismounted
  Oracle instance shut down
  
  connected to auxiliary database (not started)
  Oracle instance started
  
  Total System Global Area     524288000 bytes
  
  Fixed Size                     1220384 bytes
  Variable Size                134217952 bytes
  Database Buffers             385875968 bytes
  Redo Buffers                   2973696 bytes
  sql statement: CREATE CONTROLFILE REUSE SET DATABASE "POOR" RESETLOGS ARCHIVELOG
    MAXLOGFILES     16
    MAXLOGMEMBERS      3
    MAXDATAFILES      100
    MAXINSTANCES     8
    MAXLOGHISTORY      292
   LOGFILE
    GROUP  1 ( '/u02/poor/oradata/redo1a.log' ) SIZE 50 M  REUSE,
    GROUP  2 ( '/u02/poor/oradata/redo2a.log', '/u02/poor/oradata/redo2b.log' ) SIZE 50 M  REUSE,
    GROUP  3 ( '/u02/poor/oradata/redo3a.log', '/u02/poor/oradata/redo1b.log', '/u02/poor/oradata/redo3b.log' ) SIZE 50 M  REUSE
   DATAFILE
    '/u02/poor/oradata/system01.dbf'
   CHARACTER SET WE8ISO8859P1
  
  
  contents of Memory Script:
  {
     set newname for tempfile  1 to
   "/u02/poor/oradata/temp.dbf";
     switch clone tempfile all;
     catalog clone datafilecopy  "/u02/poor/oradata/undotbs01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/sysaux01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/users01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/example01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/poorna.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/bigtbs_01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/lak_tbs01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/vir2_01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/lak_tbs2_01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/vir_user01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/vir_bigf01.dbf";
     catalog clone datafilecopy  "/u02/poor/oradata/hrscott.dbf";
     switch clone datafile all;
  }
  executing Memory Script
  
  executing command: SET NEWNAME
  
  renamed temporary file 1 to /u02/poor/oradata/temp.dbf in control file
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/undotbs01.dbf recid=1 stamp=741272727
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/sysaux01.dbf recid=2 stamp=741272727
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/users01.dbf recid=3 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/example01.dbf recid=4 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/poorna.dbf recid=5 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/bigtbs_01.dbf recid=6 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/lak_tbs01.dbf recid=7 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/vir2_01.dbf recid=8 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/lak_tbs2_01.dbf recid=9 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/vir_user01.dbf recid=10 stamp=741272728
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/vir_bigf01.dbf recid=11 stamp=741272729
  
  cataloged datafile copy
  datafile copy filename=/u02/poor/oradata/hrscott.dbf recid=12 stamp=741272729
  
  datafile 2 switched to datafile copy
  input datafile copy recid=1 stamp=741272727 filename=/u02/poor/oradata/undotbs01.dbf
  datafile 3 switched to datafile copy
  input datafile copy recid=2 stamp=741272727 filename=/u02/poor/oradata/sysaux01.dbf
  datafile 4 switched to datafile copy
  input datafile copy recid=3 stamp=741272728 filename=/u02/poor/oradata/users01.dbf
  datafile 5 switched to datafile copy
  input datafile copy recid=4 stamp=741272728 filename=/u02/poor/oradata/example01.dbf
  datafile 6 switched to datafile copy
  input datafile copy recid=5 stamp=741272728 filename=/u02/poor/oradata/poorna.dbf
  datafile 7 switched to datafile copy
  input datafile copy recid=6 stamp=741272728 filename=/u02/poor/oradata/bigtbs_01.dbf
  datafile 8 switched to datafile copy
  input datafile copy recid=7 stamp=741272728 filename=/u02/poor/oradata/lak_tbs01.dbf
  datafile 9 switched to datafile copy
  input datafile copy recid=8 stamp=741272728 filename=/u02/poor/oradata/vir2_01.dbf
  datafile 10 switched to datafile copy
  input datafile copy recid=9 stamp=741272728 filename=/u02/poor/oradata/lak_tbs2_01.dbf
  datafile 11 switched to datafile copy
  input datafile copy recid=10 stamp=741272728 filename=/u02/poor/oradata/vir_user01.dbf
  datafile 12 switched to datafile copy
  input datafile copy recid=11 stamp=741272729 filename=/u02/poor/oradata/vir_bigf01.dbf
  datafile 17 switched to datafile copy
  input datafile copy recid=12 stamp=741272729 filename=/u02/poor/oradata/hrscott.dbf
  
  contents of Memory Script:
  {
     Alter clone database open resetlogs;
  }
  executing Memory Script
  
  *Segmentation fault*

  Please help me solve the problem.
  
  Thank you and best regards,
  Kahina Prasad.S
  
  Published by: SIDDABATHUNI on January 24, 2011 13:28

  After there alert.log of the AUXILIARY instance

• Bootcamp update fails after El capitan (please help me alone!)

  Hello

  I think I have the same problem postedBootcamp update fails after Yosemite (please help me alone!)

  But like the other user, I'm a little scared, and I don't want to lose my Bootcamp partition.

  That's why I ask you to help for solitaire (thank you much in advance).

  I upgraded my MacBook Pro 13 "(mi-2010) at El Capitan 10.11.5."

  Then I noticed that I could not find Bootcamp.

  Regarding the other question, the score was still there, but now under the name "disk0s4".

  I used Testdisk, following the advice, and I discovered the missing partion and data (I could make a copy)

  Now, I would be sure to make the right steps to retrieve the situation.

  Here is the output of Testdisk

  

  

  The partition does highlight is the right one, here's where I found my data.

  

  Now, what I'm supposed to do is follow the same steps that I read in the old post with 508484288 to step 7 and + 468284272 in step 8, in this way:

  GPT4 to rebuild using start/end offsets

  1. Sudo gdisk/dev/rdisk0
  2. P (print the complete list of parts)
  3. D (delete)
  4. 4 (part 4)
  5. N (new part)
  6. 4 (part 4)
  7. 508484288 (-start offset in the sectors or the starting point for the Bootcamp part)
  8. + 468284272 (-size offset, rather than the end offset)
  9. 0700 (part of Windows type)
  10. P (list of all parties just to see what changes will be)
  11. W (Write the new GPT)
  12. Y (Yes! really write the new GPT)

  And then I need to rebuild the MBR (as the old post)

  1. Sudo gdisk/dev/rdisk0
  2. P (print from parts list)
  3. R (Recover)
  4. O (current MBR hybrid in block letters)
  5. H (chooses hybrid)
  6. Partitioning numbers be hybridized: 2 3 4
  7. Y (good for the GRUB question)
  8. (Indicator boot part 2) N
  9. N (part 3-flag of boot)
  10. Y (boot indicator part 4 make the bootable NTFS partition)
  11. O (current MBR hybrid in block letters)
  12. W (Write new MBR)
  13. Y (yes! write the new MBR)
  14. Reset

  I'm sure I'm in the right direction, but...

  Many thanks for any help

  Excellent work. The two sets of Gdisk steps are correct. If you are on El Capitan, these two sets of measures Gdisk will fail because of the Protection of the integrity of system being activated. Please disable SIP.

  1. boot in local restoration (command-R).

  2. start utility-> Terminal.

  3. type csrutil disable in the Terminal, and then press enter/return.

  4. type csrutil State.

  5 start normally, then type csrutil status to confirm that all of the individual entries are still disabled.

• Time Machine restore failed

  Hi people,

  This dragged on for days now so I need your help to repair what is currently a brick that cost a couple of grand.

  I had my logic board & battery replaced in my mid 2015 MBP 250 GB.

  I'm trying to restore my computer using Time Machine.

  I ran into a number of difficulties.

  First, I tried to restore from the latest backup.

  Estimated to take 8hours.

  He failed.

  I tried again.

  He failed because he now says that the backup has been used by another machine.

  It was mine!

  That solved by restarting my computer and restarting the Airport Extreme, Time Capsule.

  Down to the low bar show my back upwards.

  It failed after only 30 minutes or more.

  I read the fantastic troubleshooting guide, which seems to indicate that the new logic board is time machine it's a new computer.

  I have a problem with that.

  I got my MBP passing an MBA (when I bought it) upward.

  Worked well.

  The work during the night.

  Next maybe useless idea was to get any glitches OSX went with a fresh OSX install and do a restore from time machine after that?

  So, my next attempt was to do a fresh install of OSX El Capitan.

  Until now this process should take 5 days! Seriously!

  I'm afraid to look at tomorrow incase it extends to a month or something!

  What should I do?

  When a card is replaced, unless it is flashed with the old serial number, it is a new machine that is where your problem is.

  If repair has been to an Apple store, resume and get them fixed.

  If this was done at an authorized service center, resume and have them repaired. If they do not, contact Apple.

• Skype segmentation fault - 4.0.0.7 - r2

  Hello

  I've just updated my Skype Linux based on Gentoo for Skype - 4.0.0.7 - r2 of sources.

  Skype does not start after that little start up. I get the "segmentation fault" if I run it from the terminal. And get the tail the log like this:

  kernel: Skype [4569]: Segfault at 0807dc0d sp bfd4c720 error ip 3f 6 in Skype [8048000 + 19ba000]

  Then I reinstall it and working fine until a couple of starts. Then it will repeat.

  Y at - it an idea to fix it? Or should I just use for the old one version, that works so - so?

  Behavior very srtange Skype executable. It changes during execution. So, there is a decision (http://forum.xakep.ru/m_2657618/tm.htm):

  chmod w/opt/bin/skype

  or

  chmod w/usr/bin/skype

  Depending on your distribution.

• Examples UHD Segmentation Fault

  Hi all

  I'm having some trouble trying to use the UHD examples.

  Some of them I can use. However, some of them give me a Segmentation fault

  ==========================================================

  Rafael@Rafael-Inspiron-7537: / usr/lib/uhd/examples$. / dry tx_bursts - 5 - ampl 0.5 freq - 50e6
  Linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.005.005 - 0-unknown

  UHD WARNING:
  Failed to set the priority of the thread. Performance may be affected negatively.
  Read the general application notes in the manual for instructions.
  EnvironmentError: OSError: error in pthread_setschedparam

  The creation of the usrp device with:...
  -Opening of a USRP2/N-Series device...
  -Current frame size recv: 1472 bytes
  -Current send image size: 1472 bytes

  UHD WARNING:
  Failed to set the priority of the thread. Performance may be affected negatively.
  Read the general application notes in the manual for instructions.
  EnvironmentError: OSError: error in pthread_setschedparam
  Segmentation fault (core dumped)

  ==========================================================

  The same problem to get examples like:
  rx_timed_samples, test_timed_commands, tx_bursts and others

  I use:

  Ubuntu - 14.04

  N210 - USRP

  Hi Rafael,.

  While you can find other UHD users in these forums that can help the best bet is probably to send your question to [email protected] because they are much more experienced in troubleshooting UHD.

  Best regards

  Peter W.

  PES OF RF

• Vista Start black normal & all Security Modes, restore fails, screensaver ŒUVRES

  Yesterday (18/06/09) I installed a few new updates, but is not a restart.  Today, the system was sitting idle (, but nobody use it) and we had a power failure.  Restart the system wanted to make a volume control.  During the audit, he found a bunch of bad index entries.  The files went flying by pretty fast, but I could tell that many of them had something to do with Media Center.  Then later in the repair of the volume, she added a bunch of orphaned files.  I couldn't give a sense these files because all the entries were similar to Hex IDs.

  So that brings us to today.  The system starts with black screen with a mouse pointer.  System knows I have 2 monitors connected & I can move the mouse between the two monitors.  With the help of other boots (via F8 in the boot menu) produced similar results, except in safe mode boots, the system does not know the 2nd monitor.  CTRL-ALT-DEL does nothing.  (Do NOT bring up the Task Manager.)  The SHIFT key to display the Sticky Keys dialog box.  After a while, the screen saver turns on.  With screensaver KB/mouse activity outputs and system back to black screen.

  All the security startup black screen Modes.
  Low-resolution video starts with black screen.
  Black screen on startup of the diagnostic Mode.
  Directory Services Restore Mode reports all my disks are clean and black screen on startup.
  Sleep key works.  Wake up, the system returns to black screen.

  OK, here's a little recap... BLACK SCREEN!

  So next I tried the repair your computer...

  Log in to my account admin OK.  Then I tried to Startup Repair which could not detect a problem.  Then I tried the system restore.  System Restore is all my restore points registered in April ' 09.  System Restore Gets an error and fails to load any restore point.  I have two different messages depending on what point of restoration, I try.

  2 most recent restore points are of yesterday and today and the updates, I just installed but never rebooted before the power failure disk check.  When I try these 2 restore points, I get the following:

  The configuration register is corrupted. (0x800703F1)

  If I try the old restore points, I get:

  Cannot open the file transactionally, because its identity is function
  on the outcome of a transaction not resolved.  (0x80071AA7)

  Reading through the error of this last web messages makes me think to there is a bad dependency in the update / restore of the system process.  If pending updates become corrupt, old restore points will fail.  Is this true?
   
  I can boot from a CD-ROM of 3rd party and see my programs and data on the disk.  I did a full inspection, but it seems that all of my stuff is still there.

  So finally I tried to reinstall my Vista system, and my only option is to replace my entire system.  The update option is grayed out.  I used to be able to do a re-install/upgrade to update in the old days (XT & before), but it seems that it's not possible with Vista.  It would be great if I had my old system before SP1, and then I could re - install SP1 & all of my updates.  But it would be impossible for me to recreate my 1 TB from scratch system.  Simply, I have enough DVDS to back up a lot of data.

  Is there a solution to my boot at the digital black problem, or I'm really screwed?  A reasonable solution is much appreciated.

  ==============

  UPDATE...

  I can access shared folders on the blackened on Vista machine.  I created my user account on another computer (Win XP) and am also able to access all my user files.  In addition to the screen saver and the sticky keys work, it seems that file sharing works also.  However, the printer share and office remotely (using Ultra VNC) do not work.

  Hey Ken, I just reread your post previous and tried your procedure.  Are your steps to perform a repair install on Windows site:

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now .

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license .

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1 , and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates , then select Service Pack for Microsoft Windows and click on Uninstall.

  Unfortunately, I'm stuck on the first step.  Start a Windows installation when executing my existing version of Windows when my existing version of Windows starts with a black screen, and the only interaction of console, I am able to do what a screen saver and the Sticky Keys dialog box?  What is the trick to start installation?  I can't find.  Is there a way to launch the installation with the keys dialog box to sticky?

  In addition, in the case where I, how to uninstall SP1 from a black screen?  The dialog box of the sticky keys which they as well?

  I know that other messages that other users could not bring up the Task Manager with CTRL-ALT-DELETE.  As I said in my original post, I can't do it.  THE ONLY THING THAT WORKS FOR ME IS THE STICKY KEYS DIALOG BOX.  So I do not buy any version of Vista at all costs will have what I need because Windows Vista just can't do a re - installed on-site if your Windows Vista is not running after a black screen.  Right?

  I'm getting very frustrated and would be very grateful for any help.  I just can't figure how to get the computer do anything when the only thing it starts is a black screen.  And none of my restore points can be restored.  I thought that the system restore has been the goal of the restoration of the system.  Why my Vista system locks my system restore? I don't understand!

  I think that this last update not to not fill properly and locked up my system.  Is it possible for me to undo than a black screen or a Setup disk?

  BTW, Western Digital diagnostics transmitted without error.  Then at the command prompt on my Vista disk, I ran chkdsk and it fixed some files.  I think they were just left by a system restore failed.  So I ran sfc from the command prompt using sfc/scannow damaged = c: \ /offwindir = c:\windows.  He ran for a while and there was no violation of integrity.  If the drive seems fine.  Are there tools that can help me find the problem?  Is that what I can do to restore the registry to an earlier time manually?

• Desktop appears again without any data. System restore fails to «incomplete system restore»

  Original title: System Restore failed

  My computer turns off on its own yesterday. After the reboot, my office was back to default settings. Everything that I had stored on the desktop disappeared and I also lost all my favorite places. I tried restoring the system using different dates but it said system restore incomplete. I've lost everything?

  Hi mike,.

  ·         Have you received any messages when the computer starts very well?

  ·         Your data is also missing?

  ·         Do you have any other user accounts on the system?

  Step 1: Try to start in last good known Configuration and see if you can start very well.

  How to start your computer by using last good known Windows XP Configuration

  Step 2: Start the computer in safe mode and check the number. Report of the results.

  See also:

  Abnormal termination can affect the system restore

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• System restore failed, registry damaged, signature of the problem 07: O, s is not installed

  It, s a Dell Vista. (Initially WINDOWS 7). Does not start. Comes with Startup Repair tool.

  System restore failed, damaged, registry problem Signature 07: No O, s installed.

  Choice 1 or q: beep.

  Check memory problems: no problem dedected, goes back to the Startup Repair

  Help

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. How have you tried to do a system restore?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  Method 2:

  Check the link and see if it helps:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Let us know if it helps.

• Computer Acer laptop failed after Vista SP1 update

  original title: computer Acer laptop failed after Vista SP1 update - help!

  I accepted an update from Microsoft for Vista SP1 on my Acer 5920 laptop. After re-boot to complete the update, the Acer is no longer wakes up. What happened and how I can fix itplease?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot use or restore Vista after SP1 uninstall

  original title: cannot use or restore after uninstalling SP1 Vista - please help.

  In order to perform an upgrade of Vista installation to repair the damage caused by a virus recently, I uninstalled Service Pack 1 (because installation upgrade will not work with SP1). I know there are other things I should have done (a sfc/scannow in theCommandPrompt) or SP1 slipstreamed DVD, but I did not know them at the time, nor did I think there will be problems as a result of an uninstallation of SP1. As the title suggests, I got kind of wrong.

  It all started after uninstallation, which seemed successful. I rebooted, and instead to get Vista without SP1, I get an error code of the variety of the command prompt (just the black screen with white writing). This continues for a couple of times, and after a few remedies attempts that fail miserably, I decide to systemrestore(using the Vista CD, of course) at a point before uninstalling SP1. I think it will work, but the first time, as it gets to the "development of restoration" and how he hung for three hours before, I decided to turn off the computer because he was of course not moveable anywhere. I restart and let the boot from HARD drive upwards to see if maybe something worked, and I get to the login screen of Vista, how I notice none of my devices work. The mouse or the keyboard responds (both are USB) and the attempts with the PS/2 versions don't either. I thought maybe it was a driver problem, so I reinstalled the driver chipset at the disk using my laptop (took thedesktopHARD drive, put in a box outside, then executed the installer of the chipset on my laptop and said to install outside driver), but it could not solve the problem. I also tried other restorations, but invariably they fail after a certain point, which gives me an error message:

  "System restore failed due to an unspecified error. The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction. (0x80071AA7).

  I googled errormessageand see that most people encounter it while trying to install a service pack, I thought it was a problem with restoring Vista without SP1 to Vista SP1. Thusly, I used the command from theVistaCD command-line option to read my Windows Update log and got the following:

  "2010-07-09 04:44:32:593 664 29 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =".
  2010-07-09 04:44:32:593 664 29 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 04:44:32:593 664 29 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 04:44:32:593 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:34:605 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:36:617 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 15:26:30:160 216 12 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 15:26:30:160 216 12 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 15:26:30:160 216 12 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 15:26:30:160 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:32:172 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:34:185 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 16:04:19:912 356 Misc 3 b 0 = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:04:19:912 b 356 3-0 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:04:19:912 b 356 3-0 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:18:08:745 532 248 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:18:08:745 532 248 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:18:08:745 532 248 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 Misc = logging initialized (build: 7.4.7600.226, tz:-0800) =.
  2010-07-09 16:25:53:894 976 244 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:25:53:894 976 244 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:25:53:894 976 244 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 COMAPI WARNING: failed to connect to the service. (HR = 80080005) »

  I can't interpret it, although it seems to confirm my suspicions the transition from other than the SP1 and SP1 is causing issues. If someone else could interpret this?

  Basically I have a non-functional operating system, I can not restore it to a State of operation, nor access the input devices because it does not work on the login screen. Anyone all proposed solutions to the problem, short of a clean install of Vista? I don't want to reformat unless absolutely necessary.

  This is the forum Vista install.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  You can try the repair Forum.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Oracle db host1 and host2 restore failed

  Hello

  Oracle DB 11 g 2/Centos 6.5 x 64/AANP 7.6

  I test the restoration of the BNU 1 host to another host. Although this configuration will as well as the configuration of NBU, I think that this question of my Oracle RMAN.

  Configure a database even with the same instance name (the two default installation), the settings for the restoration. Then restore with RMAN.

  RMAN > run {allocate channel ch00 type 'sbt_tape';

  2 > Send "NB_ORA_CLIENT is host1.lab.tec";.

  3 > restore database;

  4 > restore database;

  5 > output channel ch00;

  {6 >}

  I have a problem when restoring. After the recovery is complete, I can run and start db OK.

  SQL > alter database open resetlogs;

  Database altered.

  But this is a small test db, I'm worried if I do it in a real environment. Wihout solve this problem, I would like to get troulbe. Hope someone can help with this.

  ========= logs error =======================================

  using the control file of the target instead of recovery catalog database

  allocated channel: ch00

  channel ch00: SID = 18 device type = SBT_TAPE

  channel ch00: Veritas NetBackup for Oracle - version 7.6 (2013111313)

  command sent on the channel: ch00

  From restoration to 21-SEP-14

  From backup implicit intersection to 21-SEP-14

  Finished the backup implicit intersection to 21-SEP-14

  Starting copy of implicit intersection to 21-SEP-14

  Copy of implicit cross ended up at 21-SEP-14

  the search for all files in the recovery area

  cataloging files...

  not cataloged files

  channel ch00: from the restore backup set data file

  channel ch00: specifying datafile (s) to restore from backup set

  channel ch00: restore datafile 00001 to /data/oracle/oradata/tecdb/system01.dbf

  channel ch00: restore datafile 00002 to /data/oracle/oradata/tecdb/sysaux01.dbf

  channel ch00: restore datafile 00003 to /data/oracle/oradata/tecdb/undotbs01.dbf

  channel ch00: restore datafile 00004 in /data/oracle/oradata/tecdb/users01.dbf

  channel ch00: restore datafile 00005 to /data/oracle/oradata/tecdb/bigdata01.dbf

  channel ch00: reading of the element of backup bk_dTECDB_u07pj38v9_s7_p1_t858891241

  channel ch00: piece handle = bk_dTECDB_u07pj38v9_s7_p1_t858891241 tag = TECDB_BKP

  channel ch00: restored the backup part 1

  channel ch00: restoration complete, duration: 00:01:15

  Restoration finished 21-SEP-14

  From back to 21-SEP-14

  starting media recovery

  channel ch00: archived startup log restore to default destination

  channel ch00: restoration of archives Journal

  Archives journal thread = 1 sequence 9 =

  channel ch00: restoration of archives Journal

  Archives journal thread = 1 sequence = 10

  channel ch00: reading of the element of backup arch_u09pj393g_s9_p1_t858891376

  channel ch00: piece handle = arch_u09pj393g_s9_p1_t858891376 tag = TAG20140921T205616

  channel ch00: restored the backup part 1

  channel ch00: restoration complete, duration: 00:00:25

  Archive log file name=/data/oracle/flash_recovery_area/TECDB/archivelog/2014_09_21/o1_mf_1_9_b1y08dhs_.arc thread = 1 sequence 9 =

  default channel: archived deletion or newspapers

  RECID = STAMP 7 = 858901628 name=/data/oracle/flash_recovery_area/TECDB/archivelog/2014_09_21/o1_mf_1_9_b1y08dhs_.arc archived log file

  Archive log file name=/data/oracle/flash_recovery_area/TECDB/archivelog/2014_09_21/o1_mf_1_10_b1y08dmw_.arc thread = 1 sequence = 10

  default channel: archived deletion or newspapers

  name=/data/oracle/flash_recovery_area/TECDB/archivelog/2014_09_21/o1_mf_1_10_b1y08dmw_.arc RECID archived log file = 6 = 858901628 STAMP

  Cannot find the archived log < < < < < < < < < < < < < failed here

  Archives journal thread = 1 sequence = 11

  output channel: ch00

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover to 21/09/2014 23:47:18

  RMAN-06054: unknown request media recovery log archived for thread 1 with sequence 11 and from the 1030445 SNA

  If you have not specified a DEFINED point UNTIL Oracle might attempt a COMPLETE recovery.  It is possible that at the time of the backup, suite #11 remained a newspaper online redo and not yet archived on.  If so, you would SET UNTIL SEQUENCE 11 while Oracle would cease after having applied the #10 sequence

  Hemant K Collette