Satellite C55-C-1LU - touchpad no longer works

Similar Questions

• My Satellite Pro A200 (PSAE7E) touchpad no longer works

  Dear Sir.

  My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

  I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

  I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

  Can you help me please

  Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

  Thank you very much

  Zaid

  Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
  So the latest driver, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

  Check it!

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Satellite M50 - A - ELAN touchpad has stopped working

  Hello

  My keyboard and touchpad no longer works out of nowhere (I think that it is after the update of windows?) and I can't seem to be able to fix it, I tried to reinstall the drivers for the touchpad and nothing has changed, as I could not find the drivers for the keyboard.

  can someone recommend me to do? I'm going crazy with this laptop!

  (The model is Satellite M50-A-118)

  Posted by osyeon
  

  UPDATE: I did a system restore and now everything works, quite naturally, this last update windows messed up with my laptop

  Thanks for the comments.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• Satellite M70 PSM73C - touchpad no longer works

  For some reason any my touchpad isn't working.

  After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
  I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.

  The shield of the installation does not work yet.

  Anyone who has had success or knows how to get this software to install the touchpad?

  Thank you.

  What error message you get exactly?

  To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.

  Check this box and post your result.

• Satellite L305-S5921 - Touchpad no longer works

  Thanks in advance for any help.

  I had my laptop for about a month now, and about a week in I plugged a USB external mouse because I prefer it on the touchpad. One day I decide to unplug the external mouse and use the touchpad for a bit, but when I unplugged and allowed to the touchpad, touchpad does not work.

  I tried the FN + F9 key combination several times but it does not work and I have also reinstalled the drivers for the touchpad repeatedly and they have not worked either. I also uninstalled the touchpad drivers and rebooted the computer, leave the computer to deal with reinstalling the drivers, but the result was the same.

  Someone at - it other ideas or do I have to send my laptop in for repair?

  Hello

  Did you install additional software for external mouse?

• Satellite Pro L450D - 12 X - pad touchpad no longer works

  My daughter used the laptop earlier, when suddenly the mouse pads and buttons right and left click stopped working.

  I tried to restart and even restore to an earlier time, but nothing he will work again.

  Any ideas what this could be and how it can be sorted?

  Thank you.

  Hello

  Have you checked if the touchpad has not been disabled by mistake using the FN + F9 keys?
  Please check this box.

  In most cases, this tiny option would be to neglect and in most cases, this is the reason why the touchpad does not work.

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.