ISE upgrade fails for 1.1.2.145 1.1.0
Hello
I am trying to upgrade ISE 1.1.0 to 1.1.2.145 in vain. Find the details below.
DR-ise-pdp-01 / admin # application upgrade to ise-appbundle - 1.1.2.145.i386.tar.gz ISE1
Save the current running of ADE-OS configuration? (yes/no) [Yes]?
Building configuration...
Save the current configuration of ADE-OS at startup
Launch the Application upgrade...
Stop ISE application before upgrade...
Being upgraded database ISE...
Failure of the upgrade of request %. Please check the logs for more details.
Concerning
Hello
Try to go to v1.1.1 first, add patch3 and then go to v1.1.2.
ISE relaese notes:
Upgrade Cisco ISE, version 1.1.1 for release 1.1.2
Before you can upgrade to Cisco's ISE, version 1.1.2 you must be firstly that you have improved your machine at ISE of Cisco, version 1.1.1 with patch 3 applied. For specific instructions about how to upgrade, see the Cisco Identity Services engine Upgrade Guide, version 1.1.x.
HTH
Tags: Cisco Security
Similar Questions
-
Satellite M300 - Sound driver for Vista 64 says upgrade failed
I just reinstall my M300 with Vista 64 and I have the problem with the audio driver (I have download this Toshiba site).
It says upgrade failed or something.
> I have sounds coming out of the speaker, but the quality is very low
This means that the audio driver has been installed correctly!
To increase the volume, you must go to control panel-> sound and need to check if the volume control is defined at the top level.By the way; This laptop seems to belong to Toshiba US series.
Therefore, you should check the Toshiba USA for drivers and BIOS update:
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp# -
With losing connectivity problems so decided to update v1.00.7 firmware to the latest version available.
Download the upgrade file and log into the web-based administrator. Select file, and then click the UPGRADE button. A few clicks on the timeline, then: UPGRADE FAILED
What is happening with this?
I am a fool! I downloaded the firmware file is for the version of the wrong material. After you download the right pair (Version 6), the upgrade went like a charm...
-
Windows10 upgrade failed - found error 80004004-40019
W10 upgrade failed - found error 80004004-40019 - said encountered unknown error - so does not allow me to upgrade for free. Does this mean I have to buy W10
Try to upgrade manually:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
-
Upgrade failed at 93% and the previous version of windows restored. Previous version was W7.
Error messge was '0x8007002C-0x4000D. Installation has failed during the SECOND_BOOT
with an error in the course of the operation MIGRATE_DATA".
Any ideas, please.
Thank you very much
Alec
You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.
Disable your anti-virus software so that the upgrade.
I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.
Download the update of Windows Media Player 10 tool creation build 10586:
http://www.Microsoft.com/en-us/software-download/Windows10How to download an ISO using media tool:
http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.htmlHow to make a upgrade in Place using method 1:
http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6If this does not work please provide more information for your issue to be diagnosed.
Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.
Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.
Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.
To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.
For assistance OneDrive see paragraph 9.3:
-
Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"
The PC is running Windows 7 Starter. I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.
When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgradeAdditional resources:
-
Windows whenever the upgrade failed
To make the windows anytime upgrade, that I run the program, enter the key, click Next, accept terms, wait 10 min thing and two minutes later, the error appears. "Windows Anytime Upgrade was not successful"-"the upgrade has failed. Please retry the update' and 'go online to try to solve this problem' below, so I. Please tell me how to fix, I think that its probably my internet (if you look at my other question).
Thank youWindows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
Windows 7 Anytime upgrade failed
Windows 7 Anytime upgrade failed after my business card has been charged.
Who can I call to get a new upgrade key?
An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
You can use the same key and try the upgrade again. Click Start, type: Express upgrade
Press enter on your keyboard
Click on the option "enter a product key.wait for the verification of the key, to accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are needed), your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade , a windows will pop up by notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7, your files, programs and settings retained.
If at any time the upgrade fails, Windows Anytime Upgrade Fail:
Download the hotfix that contains a tool called CheckSUR, this tool will look in the package and the maintenance of records and fix corrupted data, the tool is listed under kb947821 it is located at the following link http://support.microsoft.com/?kbid=947821If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usualIf you lose your product key, you can return to www.windows7.com/getkey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
-
W7 is accepted, but the upgrade fails
I run W7 home Premium that came pre-installed on my laptop. I wanted to move to W7 Pro. Anytime online update doesn't let me do this based on the restrictions of the place, somehow. He suggested that I buy a key from a retailer instead, as I did.
Now, I entered this key in the update of any time and it seems that he had accepted the key, that I can forward to accept the license terms and then it starts to do his work, say how it will take about 10 minutes, etc.., but not for long. I don't know if I still get the same error message now, compared to when I tried to update the first time, but now, he said something to the effect of (this is a German Windows):
Enter the different product key
The Enter key is designed for a version of Windows that is compatible with the upgrade Express (sic!). Enter the different upgrade key.
Now I checked my key with a key verification tool and it makes the new key account I had entered the Pro upgrade and it seems, so I'm stuck with a system on the new key, but will not perform the upgrade.
What should do?
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
HELLO, ANY HELP GREATLY APPRECIATED I BOUGHT EVERY TIME THE UP TO SPEED & THREE TIMES TRIED TO INSTALL IT IN
PACCKARD BELL DESKTOP COMPUTER, WITHOUT SUCCESS. I USED THE RESTORATION OF THE SYSTEM DUE TO THE FAULT IN THE COMPUTER
TO TRY AND INSTALL. Thank you
If at any time the upgrade fails, Windows Anytime Upgrade Fail:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
VSphere 4.0 to 5.0 upgrade fails to update the database
Have migrated to the server hardware vCentre a virtual machine during the migration of the database and the installation on Windows 2008 R2 (64-bit). Ok all worked. vCntre and database is on the same server.
Now try to upgrade the migrated vCentre 4.0 to 5.0 and get a failure when it is trying to upgrade the database. The original installation was improved by 3.5 to 4.0, so I wonder if this has something to do with the problem.
Having successfully upgraded our other two vCentre servers, who were previously on 4.1.
Get the following errors and joined all the log files.
[21/06/2012 14:41:39] Preparation for upgrade.
REMOVE FROM VPX_TABLE
[21/06/2012 14:41:39] Error in RunSqlScriptNonQuery(): Got exception: ERROR [S 42, 02] invalid object [Microsoft] [SQL Server Native Client 10.0] [SQL Server] name 'VPX_TABLE '.
REMOVE FROM VPX_INDEX_COLUMN
[21/06/2012 14:41:39] Error in RunSqlScriptNonQuery(): Got exception: ERROR [S 42, 02] invalid object [Microsoft] [SQL Server Native Client 10.0] [SQL Server] name 'VPX_INDEX_COLUMN '.
REMOVE FROM VPX_SCHEMA_HASH
[21/06/2012 14:41:39] Error in RunSqlScriptNonQuery(): Got exception: ERROR [S 42, 02] invalid object [Microsoft] [SQL Server Native Client 10.0] [SQL Server] name 'VPX_SCHEMA_HASH '.
[21/06/2012 14:41:39] Made the upgrade preparation.
[21/06/2012 14:41:39] Info: Launch the progress bar
[21/06/2012 14:41:39] Total of the lines run: 553
[21/06/2012 14:41:39] Info: Upgrade from version 4.0 to version 4.1 database
[21/06/2012 14:41:39] Upgrade-V400-to-v410\MSSQL\upgrade_mssql. SQL
truncate table vpx_version;
INSERT INTO vpx_version VALUES (410, "VirtualCenter 4.1 database ' ');
If exists (select * from sysobjects)
where id = object_id ('delete_stats_proc')
and OBJECTPROPERTY (id, 'IsProcedure') = 1)
DROP PROCEDURE delete_stats_proc;
[21/06/2012 14:41:39] Error: Unable to run the command: if it exists (select * from sysobjects)
where id = object_id ('delete_stats_proc')
and OBJECTPROPERTY (id, 'IsProcedure') = 1)
DROP PROCEDURE delete_stats_proc;
[21/06/2012 14:41:39] The exception: ERROR [S 42, 02] [Microsoft] [SQL Server Native Client 10.0] [SQL Server] invalid object name 'msdb.dbo.tblExclusion '.
[21/06/2012 14:41:39] Upgrade error: ERROR [S 42, 02] [Microsoft] [SQL Server Native Client 10.0] [SQL Server] invalid object name 'msdb.dbo.tblExclusion '.
[21/06/2012 14:41:39] Info: Release upgrade wizard
[21/06/2012 14:41:39] Successfully executed: alter database [VIM_VCDB] restore SIMPLEsee if the thread below
-
vCenter 4.0 to 4.1: Oracle DB upgrade fails
Oracle and VC on the same physical server.
Win2003 64 bit SP2, Oracle 11 g (11.1.0.6) 32-bit, 64-bit DSN with the ODBC moment driver Client 11.2
During the launch of the VCDatabaseUpgrade.exe upgrade wizard I get an error and the upgrade fails.
In the VCDatabaseUpgrade.log, I get the following lines:
Info: start upgrade process...
Info: VCENTER4_X64 was detected as an Oracle server.
Error in InitVersion(): Got exception: arithmetic operation resulted in an overflow.
Error in GetDataseSpace(): Got exception: arithmetic operation resulted in an overflow.
I activated the tracing in the pilot OC4J (attached SQL. LOG file).
It seems that VCDatabaseUpgrade.exe is running only these 2 questions:
"select ver_id, version_value from vpx_version.
"select null, a.data_sizeb.temp_sizec.redo_sized.controlfile_size of (select sum (bytes) / 1024/1024 dba_data_files data_size) a, b (select nvl (sum (bytes), 0) / 1024/1024 temp_size dba_temp_files), c (select sum (bytes) / 1024/1024 sys.v_ redo_size $log), (sum(BLOCK_SIZE*FILE_SIZE_BLKS)/1024/1024 controlfile_size by selecting from v$ controlfile) +.
The two queries, run manually with vcenter user, return the expected results.
I'm going to open a service request, but I have an HP support contract and I have to wait the ping-pong between HP and VMware...
Suspicion very appreciated, I really look forward to playing with the new features in 4.1, but if I won't be able to upgrade before the end of the summer I'll have to restart to work and wait for the Christmas holidays
Hello
Try 11.1.6 ODBC client... I will even erro and change an ODBC Client solve...
-
I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.
In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.
In the release notes for vSphere, in the section known issues, I can read:
"Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.
When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.
Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »
The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.
Thanks in advance for your support.
Hi Caddo,
I had the same problem with one of my hosts. It was resolved after disabling HA on the cluster and enabling again.
Mirko
-
Is Kindle for Mac version upgrade available for El Capitan?
Is Kindle for Mac version upgrade available for El Capitan?
Contact Amazon's Kindle. They are Kindle owners
-
Upgrade memory for Satellite 2800 400
I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?
Hi Ben
Maybe you used the memory modules bad.
As far as I know that you can upgrade memory for max 192 MB
The 64 MB has been installed in an internal memory and cannot be deleted.I found these compatible modules:
PA3003U - 1 M 03 32 MB
PS3004U - 1 M 06 64 MB
PS3005U - 1 M 12 128 MB
Maybe you are looking for
-
I want to update my laptop ram, can someone tell me what kind of memories, I can use for my laptop thanks Satellite Pro A40.
-
I had an update before closing my office last night (that is, using Vista). This morning when I turned on the computer, a black screen came with the appearance of the following text: 1142/1142 (Registry\Machine\COMPONENTS) I couldn't do anything so,
-
If the title pretty much sums up it. Speakers of my laptop won't work if my headset (or other external speaker) is plugged into the jack Socket 3.5 mm on the front of the laptop. This is a new feature for Windows 7. Long story short... the helmet
-
Customize the library of images (Explorer)
Hello worldAs a member of the community who spends a good amount of time to untangle the library of other peoples problems, according to me, I really should be able to fix this one for myself, but so far without success... so please if someone can he
-
How to open a link that was received in an e-mail usung microsoft live mail
I received a number of emails with a link to something else. When I click on that link a box pops up saying "this file does not have a program associated with it for performing this action. Please install a program or, or if it is already installed,