ISE WLAN / Identification SSID for converged access 3850/3650

Similar Questions

• ISE - authentication radius AAA for n access

  Hello

  I have configured the switches to use the ISE as a Radius Server to authenticate with, on the ISE, I configured an authentication strategy

  for the 'DNA' using the devices 'Wired' group that points to the source of identity AD to authenticate.

  All testing switches access connection we found 2 results:

  1.A domain user can connect to the switch as expected.

  2. each domain user that exists in the source of advertising identity can connect, this is an undesirable result.

  So I will try to find a way to restrict access to the ENAD to only a specific group belonging to the announcement, for example the group/OU

  of the IT_department only.

  I did not, would appreciate any ideas on how to achieve this.

  Switching configurations:

  =================

  AAA new-model

  !

  AAA authentication login default local radius group

  !

  ISE authentication policy

  ==================

  !

  Policy name: DNA authentication

  Condition: ": a device Type equal to: all Types of devices #Wired.

  Authorized Protocol: default network access

  Use the identity source: AD1

  !

  No problem is how to set up policies, don't forget to evaluate any useful comments when you are finished testing.

  Thank you

  Tarik admani

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Can I assign some SSID for some specific points in the mesh network?

  Hi all

  We put a mesh in the site network. But a wireless client operate only at specific areas and that they are not on the move. So, I want to limit this ssid only at this place. So I wonder if I can attribute this ssid for 1 or 2 access points in this region. Other access points do not have this configured ssid. I can do this in WLC?

  Thank you very much!

  Lou

  He called the AP groups.  (Wireless > advanced > groups AP)

  Please do not forget to messages useful rate.  Thank you.

• How to download to iCloud for iOS for offline access device

  How can I download a file from iCloud drive iPhone 6 for offline access?

  The file would need an app to run in.  For example, a Word file could run in the application of the word iOS.  What kind of file is it?

• How can I put an icon on your laptop MAC Book Air - i.e. Facebook (for faster access)?

  How can I put an icon on your laptop MAC Book Air - i.e. Facebook (for faster access)?

  Drag it to your desktop.

• Extend my extreme network with another extreme - waiting for internet access

  Hello - I have a new generation Airport Extreme (let's call it Extreme1) connected to a Comcast modem and it works very well. The extreme will be the router that the modem has no router function. I'm trying to expand my network to another room with another extreme (let's call it Extreme2). I have a connection cable between two rooms. Extreme1 has an ethernet cable from one of its LAN ports connected on port WAN Extreme2. When I try to create a new network with Extreme2 (in aid of the same name, passwords, etc.) it does not work. He was suspended at the end when he is looking for a connection ("Waiting for internet access")-I did the following things based on what I read here:

  1. Changed IPv6 link local parameters
  2. Tried the whole upward on my Macbook and tried on my iphone
  3. The Wan first and then tried to change the configuration after you done for Extreme2 by creating a network
  4. Tried to create a network with Extreme2 connected directly to the modem
  5. Extreme2 factory reset after every attepmt

  And nothing works. Kicker is, I also have a reasonably new airport express and the same thing happens to her as well.

  Do I need to adjust some parameters of network that I'm not aware of? Is it possible that my LAN ports are disabled on Extreme2? It is brand new.

  Thanks for any help.

  Have you used the Apple Setup Assistant?  If you did, it had notified you that the extreme second was being configured "add using Ethernet. The wizard will automatically configure the second airport with the appropriate settings for you.  All you have to do is enter a name of device for the second AirPort Extreme.

  Here I'm assuming that you reset the second extreme to parameters by default until you set it up again and that your second Extreme is the current version of the "tower" or that of previous versions "flat or square.

  The example below shows an AirPort Express as the device which is the extension of the network, but you will see the name of your network and AirPort Extreme on your configuration screen.

  Post back if you need some tips on using the "Wizard" for your configuration.

  

• HP Pavilion dv6-6b56er: module WLAN 5 GHz for HP Pavilion dv6-6b56er

  Greetings!

  Spoiler (Highlight to read)

  

  As I broke the wlan module (Connector for white cable) everything disassemble to clean (dust in the cooler), so I need to replace it. I found Manual for my laptop with wlan support modules. So the question is what module WiFi 5 ghz I can buy for my book? I mean if no modules wlan (in manual) may not support 5 GHz, will be something like this to work?

  Thank you

  I've found this module Intel Centrino Advanced - N 6230 WLAN supports 5 ghz, so I'll buy it. close the message pls because I can't find how to do this.

• When trying to start the disk check procedure, I get the answer, "cannot open volume for direct access. How can I fix?

  I get the above answer everytime I turn on the computer. (This is with AutoCorrect blocks checked). If I leave blocks unchecked, it follows a procedure 3 pass without rebooting and does not produce a result.

  * original title - to try to start the procedure of checking disk I get the answer, "cannot open volume for direct access. How can I fix? I ran the GET Microsoft virus check tnd an own result.*

  The application-specific permission settings do not authorization for the application server COM with the CLSID
  {DCBCA92E-7DBE-4EDA-8B7B-3AAEA4DD412B}
  the user NT AUTHORITY\SYSTEM SID (S-1-5-18). This security permission can be modified using the Component Services administrative tool.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_comp_exp.mspx?mfr=true

  In the opposite case

  http://blog.ray1.NET/2008/01/WinXP-SP3-DCOM-system-error-dcbca92e.html

  http://TechNet.Microsoft.com/en-us/network/bb545879

  http://www.blackviper.com/wiki/Network_Access_Protection_Agent

• Error: "cannot open Volume for Direct access" is displayed when Chkdsk runs at startup

  Original title: Edit/Fix key in my registry

  CHKDSK keeps trying to run during startup, but "cannot open volume...". "If I can solve this problem, I want to put it in the manual, not automatic.      My registry key: "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\rchelp is missing.   Can I remedy this by creating a text file with an REG extension and if so, where can I find the exact measurements to do?  It is the DOS Cmd or in Notepad?

  Hi BarneyBear,

  1 did you allow that chkdsk runs successfully at the start of the system?

  Editing registry is not necessary here. We recommend you to check if the disk check is scheduled.

  This problem can be solved by installing the latest service pack Windows XP.
  See the error message "Impossible open Volume for Direct access" When Chkdsk runs at startup

  See also, Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open volume for direct access?

  OK so I have windows vista 32-bit home... and I installed this program from avg that solves all the problems on the computer... Well now when I boot, I get a cannot open volume for direct access... and I loaded my computer finally and its telling me everything is corrupted?

  Hello

  I'm sorry but most of the posters, which I am part, who come here do not believe in using Tuneup Utilities, registry cleaners, etc. to improve performance or solve problems.

  They are completely unnecessary.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Or, if you don't have one, borrow a DVD of Microsoft Vista, not a recovery disk and you could do a upgrade in repair facility.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And I have contacted AVG or their Forums as you say it was their program that caused the problems.

  http://free.Avg.com/us-en/support

  See you soon.

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.

• CHKDSK error: cannot open the volume for direct access.

  CHKDSK is on the machine does not work it gives me the error:

  
  Cannot open volume for direct access.
  Autochk cannot run because of an error caused by a recently installed software.
  Use the system restore feature in the control panel to restore the system to a point prior to the installation of the new software package.
  An unspecified error has occurred (766f6c756d652e63 3f1)
  
  
  
  When I run it.

  I also tried a boot following the instructions of clean boot in Microsoft (through the http://support.microsoft.com/kb/331796 URL) and then try to run a CHKDSK command-line command (cmd) prompt in an administrator account and it always gives me error 766f6c756d652e63 3f1

  I also have the CD of Windows 7 available and administrator of the computer. I don't know how to get it to make CHKDSK work correctly at startup
  Thank you

  Hello Mitcherator777,

  You can connect to your computer in normal mode or only in safe mode?

  It would be the best way to run the Chkdsk command:

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Let us know the status of your question.

  Thank you

  Marilyn

  Marilyn,

  This problem has been resolved, I contacted Microsoft directly on the phone in the time of September.
  Question has proved to be a dirty disc. as my 1 year limited manufacturer expired warranty, I have since last week bought a new HDD to solve this problem.
  Please examine this issue.
  Thank you.

• Need for WLAN, drivers WIFI for HP Pavilion 15-n011tu on windows 7

  Hello

  Need for WLAN, drivers WIFI for HP Pavilion 15-n011tu on windows 7? Please let me know I can load it.

  Thank you

  Hello:

  Use the W7 x 64 drivers of this model: I added bluetooth driver because you need to too.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_122653_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_119299_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118533_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• ASA 5510 VPN for remote access clients are asked to authenticate on box

  Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -

  For remote access connections, you can turn off the prompt xauth (user/pass) with the following:

  Tunnel ipsec-attributes group

  ISAKMP ikev1-user authentication no

  -heather