issue of movement base file?

Similar Questions

• Move a file causes it to back up?

  Time Capsule 3 to in operation since November 2013. No problem, running the latest firmware 7.7.7 and it saves the family with 760 GB of free computers.

  My main computer is an iMac running the most recent El Capitan and all other software.

  His iTunes library was initially introduced with the first version of iTunes way back when and has been updated and moved to his third computer (or 4th?). No problems. But, the Organization's old school, it's all in the music with folders for each artist folder and folders for movies and TV shows mixed in. It's about 650 GB in size.

  I want to change iTunes to use the modern organization with music, series TV, movies, etc files in the iTunes library folder. Basically, this allows iTunes to move files on a massive scale (or I do it manually). What I don't want, it's for the time Capsule decide to save 680 GB of files after that I do this.

  Time Capsule backup a file because it is being moved?

  I use the new iTunes Library organization on a Mac that is not be saved, and I like it much better.

  So. Issue. Allowing iTunes to reorganize all this (or made it) will cause a massive backup?

  Thank you.

  Given that the movement will change the file, Time Machine will be to save them.

• I can't move folders/files in the iTunes library

  Hello

  I am reorganizing my iTunes library after the implementation of a server. Even if I used the dialog box in iTunes (Preferences) to move the files, many, many links were broken. There is now a location in the library moved with the following path: X:\iTunes Library\Music\Unknown Artist\Unknown Album. The files in this folder are all parts of the existing albums. The rest of the songs from these albums are properly located in the location of the library, which is to library X:\iTunes. Most of these files is purchased AAC files. The files are not corrupt, by what they play. They also seem to have the correct information, when I look in the Properties dialog box, or query information through read in iTunes. In iTunes, it is ALWAYS the path: X:\iTunes Library\Music\artist\album, with the annexed artist/Album information. For example: X:\iTunes Library\Music\Michael buble\christmas\01 it starts to resemble a large number of Like.m4a. I would like to move these files to their correct locations in X:\iTunes Library\artist\album, as well as the rest of the files in the albums they are detached. When I try to move the files, they are not being apparently copied or moved. If I connect them to the entries in iTunes after the move or double click on it to play in iTunes, they disappear from the new location and reappear in a folder with the path X:\iTunes Library\Music\Unknown Artist\Unknown Album or one with a path like this: X:\iTunes Library\Music. I have no solution to this problem, I have tried everything I know to do to fix and searching newsgroups for a solution. I'm on Win10 and iTunes 12.3.1.23. Help, please. This is driving me crazy.

  Scott D.

  The typical reason for the files are moved to the folder unknown Artist\Unknown Album is that they do not have a tag or the tag is empty. This is true of all the files in the .wav format, as they have tags. In some cases, mp3 files may have several tags, that maybe not all the same data and including an iTunes reads or updates is not set. ITunes can finally move things forward in the wrong folder where there are permissions issues, but usually that moves things to a level or in rare cases throw them on the desktop.

  When you say that allowing you to move the preferences files, you update the path in the media folder and then consolidate library (create copies, leaving you to delete the originals by hand) or did you move them by hand and then update the file? This second method is a common cause of problems. When it works it is a happy coincidence. It is not how you are supposed to move content from iTunes.

  In a modern iTunes library, the correct layout for the elements of music is \Music\- with other types of media stored in different subfolders ------.

  Follow the steps to repair the security permissions for iTunes for Windows to your Media X:\iTunes library folder.

  Verify under file > library > library organize the box to reorder the files is grayed out. In case contrary it check now and apply. It should reorganize and files located in ------------ form. He pourrait also move things out of unknown Artist\Unknown Album.

  Look for the entry in the library for one of the files that is still unknown Artist\Unknown Album and information. Check that album & artist are filled. What format is the file? A correction in the name of the song, for example to add an end of X. Assuming you have the possibility to keep organized activated now moves to the right folder? If so turn keep organized power off, then turn it back on it. Who should correct the other misplaced items.

  For more information about the ideal layout for your library, see make a library of portable split .

  TT2

• Cannot move the files to the trash - just keeps turning

  Original title: trash

  I cannot move the files to my trash - just keeps turning... but does not connect. Have tried empty, but said: "to have 0 in the trash.

  Hey golfer Mi,.

  1. what type of files you delete?

  2. were you able to move the files to the trash before without any problem?

  3. did you of recent changes to the computer?

  Step 1:

  You can try the following steps and check if it helps.

  You can try to drag a file it and check if it appears in the Recycle Bin

  a. right click on the Recycle Bin and select Properties.

  b. disable the option "do not move files to the Recycle Bin. Delete file immediately when it is deleted. "and check.

  Step 2:

  You can also try to create a new user account and check the issue.

  Create a user account

  Hope this information is useful.

• How to move the FILE from one place to another and keep "Indexing" have to move to the unknown location so you can't discover its full file path? Windows instructions provide information wrong re: how to do this!

  Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.

  Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/.  If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.

  If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/.  Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.

  If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders).  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Need help with the batch file command - move all files/folders

  I need help creating a simple batch file that performs the following operations:

  Move all files AND folders in a source folder to a target folder. The source folder will be mklinked with the target folder and an infinite loop can be possible, not sure if any order would be necessary here to avoid this? Executed once A thing, or a thing to stop?

  It comes to free up space on an SSD by iTunes forced location for backups and apps to be physically on another HARD drive, but available as if it were in default location.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• When I drag and drop or delete or move a file in a different way, it remains in the place where it is and its shortcut no longer works, and a working copy of it appears where I wanted to put it.

  is this a virus? I tried restoring the system several times and it doesn't have this problem. Help, please

  After inspection, everything moves, except that I have to close and reopen the file window to display all changes and I have to log off and turn it back on to see any Exchange Office.

  Hi Colton

  It resembles a kind of refresh issue?

  The next time you move a file and see this problem, try pressing the F5 (refresh) to see if this solves the problem.

  Let us know the results.

  Ragards

• Move the file in the folder of the same name in AppleScript

  I had a problem with the script below. Basically, on the execution of the script, I want to create folders based on the name of the file and move the files in the files of autocorrelation. However, at the minute, that I'll have to choose the folder in which the script should run.

  Folder to choose a folder

  say application 'Finder '.

  located fileList to the name of every file in Folder with name extension is "m4v".

  end say

  the value point text delimiters to ".".

  Repeat with dittos in list of files

  get each text element of dittos

  masterFile defined in the point 1 of the result

  say application 'Finder '.

  create a new folder to Folder with properties {name: masterFile}

  move (each file from the folder Folder whose name contains masterFile) will cause

  end say

  end Repeat

  Ideally, I would like it to run automatically, but the folder is on an external hard drive. (\Volumes\Lacie\Movies). and I had problems to use the POSIX and 'alias' to properly re-create the path of the file desired.

  Any help would be greatly appreciated. Thank you!

  Hello

  You can try something like the AppleScript script which is a simple shell script wrapper.

  set d to (choose folder)'s POSIX path
  do shell script "/bin/bash -s <<'EOF' - " & d's quoted form & " 2>&1
  cd \"$1\" || exit
  shopt -s nullglob
  for f in *.m4v
  do
      m=${f%.*}
      [[ -d $m ]] || mkdir -p \"$m\" || continue
      mq=$(sed 's/[^[:alnum:]]/\\\\&/g' <<< \"$m\")   # quote meta characters for regex
      find -E . -depth 1 -type f -iregex '.*/'\"$mq\"'.[[:alnum:]]+$' -print0 | xargs -0 -J% mv % \"$m\"
  done
  EOF"
  

  For example, given that you choose/path/to/directory in the folder - source

  Input state:

  /path/to/directory/abc.m4v
  /path/to/directory/abc.txt
  /path/to/directory/abcd.m4v
  /path/to/directory/abcd.txt
  

  Status of the output:

  /path/to/directory/abc/abc.m4v
  /path/to/directory/abc/abc.txt
  /path/to/directory/abcd/abcd.m4v
  /path/to/directory/abcd/abcd.txt
  

  Briefly tested under OS X 10.6.8 but no guarantee of any kind. Please make sure that you have a full backup of the original files and directories before you run this kind of script.

  Good luck

  H

• on the new program go/linkup can I move a file from desktop to laptop?

  You just bought the Pavilion HPE it came with GB/linkup. I put in place and wanted to move some files I have scanned my laptop. Can it be done?

  Yes, it can be done. Consult the following link which will help you to do:

  http://support.HP.com/us-en/document/c02540572

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• IX4 - 300 d / General SIN: How can I move large files between different folders?

  Hi @all.

  My new IX4 - 300 d arrived yesterday

  After doing his RAID-things all night, now I want to move my files from my old NAS to this one.

  I do this using Copy-supported by the ix4 - 300 d, which work fine.

  A big problem for me: I want to reorganize some large files / directories (> 200 GB), so I have to cut and paste the files from one folder to another (all on the ix4 - 300 d, but with different user groups).

  When I move files between subfolders in a folder of the sin, it works fast enough - I think here that the transfer will be treated directly by the nas server.

  When I do the same thing between subfolders in different folders (which appear as various network drives in windows Explorer), it seems that the transfer is managed by my pc or laptop - and it is very slow...

  I tried to move the files on my network environment (all folders are subfolders of a server: ix4 - 300 d) because I thought the problem was in my network mapping, but it does not work faster.

  How will I know my ix4 - 300 d to move the files directly (without the "help" from my pc)?

  Another idea for me was to do it via ftp, but my ix4 - 300 d only refused my connection (have to try a little more)

  Please help me

  I "solved" the problem by creating a copy of the temporary employment with the manual removal of duplicates once the task is completed. The copy job run all night.

  For future problems, I must think of an another "file management".

  Thanks for your response!

• How can I configure the folder in which a movie TS file stores the report?

  How can I configure the folder in which a movie TS file stores the report?

  Thank you

  Too bad... I found it

  Thank you

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.

• convert Quick Time video in a usable in Windows Movie Maker file

  File conversion

  How to convert a QuickTime video to a usable in Windows Movie Maker file

  Hello

  1. What operating system is installed on the computer?

  You will need to use a third-party converter to convert files into a format recognized by Windows Movie Maker. You can use your favorite search engine to find a software that will help you convert the files.

  WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• I can not move the files to a folder in windows XP, only to copy them, and I get the windows error. This happens on any file or folder.

  I use XP Pro SP 3 and I'm having a problem with moving the files from one folder to another, no matter where the folder or files. If I try to move a file, it crashes and it cannot be opened or used. If I move a folder, then crashes all the contents of the folder, and I can't even open the folder, it tells me access is denied, this nothing else. If I try to delete the file, then I get a prompt to error telling me that the file or folder is not accessible, and that access is denied and "make sure that the disk is not full or write protected." If I try to move the files corrupt in another folder, this time I get the message "Unable to move or replace" the file in question and "make sure that the disk is not full or write protected." If it is a document as a text file, then I can open the file and there is a prompt indicating that access is denied. I can then use the text document and save something, but if I close the document and then try to reopen it, all the changes are lost.
  It is not this problem if I move the files to an external device or disk drive.
  I am running as an administrator.
  Right now, if I need to move a file, I copy it to its destination, which is possible and then delete the original file. With the help of a release program was the only way I could delete these files, which could no longer be used.

  Hello Closrapexa, welcome.

  1. do you have this problem started recently?

  I recommend trying the system restore to bring the system back to a State before the problem started. Try this:

  1. click on START

  2. click on "all programs".

  3. click on "Accessories".

  4. click on "system tools."

  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.