Issue of pre-installation for database connector

Similar Questions

• PERC 5i SAS internal Raid pre-installation drivers

  Hi, I need the drivers of pre-installation for a: PERC 5i SAS Raid internal adapter, PCI-Express System info: Server PowerEdge 840 Dual Core Processor of 3060, 4 MB Cache, 2. 4 GHz, Xeon, Windows Server 2003 R2 helps you to 1066 MHz, thank you!

  You must run the file to extract the files first, then you can copy the files extracted to floppy.

• Node simple database pre-installation checks running for 2 hours.

  Not having my first install Oracle EBS on a concert of 16 16 VM drivers, due to the lack of sufficient space on file system, I added a new 900 GB virtual drive and rose to /d01 with lots of reading permanent writing on a BONE 7 OEL.

  Failed to install previous pre-installation check relatively quickly (10 minutes or more), but this control of pre-installation worked for 2 hours now, with no updates.

  ---------------------------

  .........

  Mid-range host ping was successful

  command: / bin/ping - c 1 host - 1.skytap.example.

  PING host - 1.skytap.example (127.0.0.1) 56 (84) bytes of data.

  64 bytes of the host - 1.skytap.example (127.0.0.1): icmp_seq = 1 ttl = 64 time = 0.062 ms

  -Home - 1.skytap.example - ping statistics--

  1 packets transmitted, received 1, 0% packet loss, time 0ms s

  RTT min/avg/max/leg = 0.062/0.062/0.062/0.000 ms

  Mid-range host domain Ping was successful

  Check complete.

  Checks of preinstallation of database

  These controls may take a few minutes...

  --------------------------------------

  The computer is allocate mem and CPU for the gnome, java and the Xorg process, but I expect to see an update now.

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  What is a 12.2 installation? If so, you should find the details on doing RapidWiz in $TMP //in the .log file - Rapid troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Use the java connector for the connector database?

  Hello

  I'm running on IOM 11gr2ps2 and need to use the database connector.  We installed the .net connector server to operate with the connector AD.

  The Oracle of https://docs.oracle.com/cd/E22999_01/doc.111/e20277.pdf documentation gives us an option to either install a java connector server to work with the database connector or install the IOM database connector without using a java connector server.

  The documentation says "execution of a connector on the connector server.

  allows to transmit queries put in service and reconciliation through the firewall in a

  as defined by the connector server.

  As I already have a connector server .net for AD, I would lean towards the installation of the java connector server.  In this way architecture remains consistent.

  Please, share your ideas.

  Thank you

  Khanh

  Table of database connector uses the Java Connector server, or it can be deployed directly in the container of the IOM.  If you have problems jar or different library due to database formats, you can use the connector server to isolate libraries and do not have to figure out how to make IOM in collaboration with several libraries.  It can also take some of the load on your server to IOM for the transformation.  I suggest to use the server connector for the isolation of the newspaper as well.

  -Kevin

• Database checks pre-installation of warning/error

  I need help, find a solution to the question below.

  Details of control system:

  Checks of preinstallation of database

  These controls may take a few minutes...

  command: cmd.exe /c C:\stage122\startCD\Disk1\rapidwiz\bin\checkOS.cmd

  C:\stage122\startCD\Disk1\rapidwiz > ECHO OFF

  File not found

  File not found

  FINDSTR: Cannot open C:\Users\ADMINI~1\AppData\Local\Temp\2\\

  (all was unexpected at this time.

  RW-50011: error:-test version of the fix/operating system returned an error: 255Database pre-installation checks completed.

  This is the only error I get on install. Let me know if any other information is needed for the resolution.

  I would like to redo the installation of the database-level node and the password apps would be 'apps' default.

  You can share the directory of the scene between the nodes.

  Thank you

  Hussein

• Installation of access with IOM database connector

  Hello
  
  I am bit confused by browsing the document for the installation of access database connector
  
  do I need to import the file from Nontrusted.xml to xliDBAccessLogin_DM
  
  or
  
  I need to first install the administration console connector
  
  I use the version of connector 9.0.4.5 with IOM 9.1.0.2 access database
  
  Edited by: Nelly Saluja on February 3, 2010 03:55

  Import the file is actually a step of the installation of the connector. If you need to import this file and follow all the other steps in the doc.

• Device VM pre-built for 12 c of database?

  Hi all

  Is he available pre-built for 12 c or 11g (11.2.0.4) databases under Linux?

  Thank you very much.

  JC

  Is he available pre-built for 12 c or 11g (11.2.0.4) databases under Linux?

  You can learn the skill the MORE IMPORTANT is to know how to find information on the internet.

  Until you learn this skill, you will NEVER be successful in things Oracle.

  A simple web search for ' oracle 12 c precompiled virtual computer provided this page as the FIRST result

  Pre-built developer VMs for Oracle VM VirtualBox | Oracle Technology Network

• pre installation of software drivers/OSX

  I am replacing a C410a all-in-one

  with a HP 8620 on MAC OSX 10.10.1 (not listed down to the bottom)

  I have not yet received the 8620

  I was thinking of driver software pre-installation and nothing else than installing the software

  any of you recommend it?

  also;

  Recently, I got nothing else that issues with a correct reinstallation of the C410a (I uninstalled and reinstalled according to the instructions from HP

  Now I confused my MAC with this new facility?

  everything worked very well until Yosenomite was released.

  a call to Apple support has helped a bit but not completely

  I refused to call HP support and pay them because I can never understand the technical support

  in this case, it will be different because it will be a new product.

  So I guess my question is, should I pre install anything? I'm sure the installation disc does NOT include the installation of OSX, and I'll have to download from the HP site. I also have Windows Vista, but have no problems with the initial installation on this OS

  Thanks, Bob (eickides)

  Robert Eick

  Hello @eickides,

  Welcome to the Forums of HP Support!

  I would like to help you with your installation questions and problems you're having with your computer Mac OS X 10.10 today.

  The HP Officejet Pro 8620 e-all-in-one printer that you'll be buying and using a computer Mac OS X 10.10 is now completely cared for and functional operating system. There is absolutely no reason why you can't go ahead and preinstall the device Drivers and software for this printer on your Mac to get everything prepared and ready for when you actually get your printer.

  If you want to download your printer drivers, please click here and simply select the "download" button in the upper left corner of the page. You can complete the whole installation. However, at the end installation, you will be prompted to "Add" your printer to your folder of printing & scanning. Of course this is not possible until you actually have the printer, so just close that box. Once you get the printer and all up you can easily add in the Mac. If you have problems with who simply join the HP Support Forums of step by step quick assistance.

  With regard to your HP Photosmart Premium Fax e-all-in-one printer on your Mac OS X 10.10 HP C410a doesn't have a comprehensive set of features and software download. Therefore, you rely solely on Apple updates to load this basic generic in driver package. In no case this generic Apple package will interfere with your HP Officejet 8620. Therefore, if you want assistance with loading C410a C410a on your Mac, please follow the steps below:

  Step 1: Uninstall the drivers and software:

  Please unplug your USB cable from your C410a before continuing.

  To ensure that we have a nice clean slate to work with during the installation of the driver correctly for your C410a please click here and through the supplied instructions to uninstall. When the page opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' that the steps are identical for Mac OS X 10.10. Please run the two method: reset the printing system, and second method: uninstall the printer software.

  Once the uninstall is complete, proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Check the Apple updates:

  1. Please plug in your USB cable now.
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 4: Add your printer:
  

  1. click on the menu Apple and then click on System Preferences.

  2. Select Print & Scan

  3. check if the name of your printer appears in the list of Printers .

  4. carry out the following operations, according to you whether or not the printer is listed:

  • If your printer is listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the sign minus (), then remove the printer. Once the printer is deleted, click the plus sign (), click Add a printer or a Scanner, click the name of your printer
  • If your printer is not listed, click the sign plus (), click Add a printer or a Scanner, click the name of your printer

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu.

  6. click Add to add the printer to the list.

  7. close Print & Scan

  Now, try to print.

  Please let me know if the information I have provided fixes your driver issues and if the steps I provided helped to reinstall your C410a. I look forward to hear from your part. happy new year!

• Deliver R12.2 installation for the upgrade

  Hello

  I'm braving question R12.2 installation for the upgrade

  Any idea on this issue.

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: out = 73 see Journal for more details. CMD = /apps1/oracle/PROD/11.2.0/OPatch/opatch-skip_subset-skip_duplicate-verbose - silent - ocmrf /apps1/oracle/PROD/11.2.0/temp/PROD_prod/DBInstallHome/fnd/admin/template/txkForms_ocm.rsp /apps1/oracle/PROD/11.2.0/temp/PROD_prod/patches/16342486/16342486/ napply

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:296)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Impossible to install the patches Oracle Database Home

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  Install the driver database for the PROD instance running

  Thank you

  ANUP

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  Please check the log files for more information about the error - quick troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Ubuntu linux driver installation for Nvidia 950 M on Dell Inspiron 17R SE 7720

  Hello

  I bought a Dell Inspiron 17R SE 7720 Ubuntu version because I like Ubuntu linux more than Windows.

  I can't find the linux drivers that will allow my Nvidia GT 950 M graphics so, basically, the card useless and no power management.
  There is absolutely nothing for Ubuntu Linux on your drivers page.

  I have updated to the latest BIOS A03.

  The laptop's Ubuntu Logo sticker on it next to the Intel i7 so I thought it is totally compatible.

  Please advise,

  Thank you

  Andrei

  Optimus system and at the present time, it is not properly supported under Linux, there is work in progress for him, but for a workaround, see Bumblebee project: wiki.ubuntu.com/Bumblebee

  Description a little longer: you have two graphics - integrated (Intel) and discreet (Nvidia). Optimus systems are designed with the intention to use the GPU integrated tasks that requires no graphic heavy treatment (most of the day-to-day activities) and the use of the discrete GPU for applications requiring more powerful GPU. Integrated card is less eager for power and voltage GPU discreet when not in service allows cooler use.

  Normally you use integrated card and there is no way to use the card nvidia directly if the BIOS does not switch to it. Help Optimus allows to use the Nvidia card for rendering and power down to save power when not in use. It has not been official for Optimus of Nvidia Linux support. Bumblebee is a community created project attempting to address the issue, but it is really only a workaround until the solution has been created. FIRST is such a solution, but at present it is still experimental and is not in any version of Ubuntu, more it is officially supported only in the open drivers source (new), Nvidia has not yet validated supporting in their binary driver.

  I agree that Dell support for bids Linux pages are sorely lacking, in fact I was not able to locate a page describing their Linux pre-installs. Ubuntu certification pages are not really informative on Dell changes and upgrade policy.

• Pre-installation requirements

  When it comes to install the Oracle database, there are two flavors is in function, another interface based graphic/YES command.
  
  The Oracle pre-installation guide requires some activities to do before installation, activities such as the creation of certain directories, setting permissions and rules and others. If I use the program YES, program YES automatically create the necessary directories as basis, at home and the inventory directories, set the permission, create rules files and other things for me? OR I still need to manually fill these actions without worrying?
  
  
  Thank you
  
  Scott

  PL complete the manual steps required before calling the YES or the command line installer

  http://docs.Oracle.com/CD/E11882_01/install.112/e24321/pre_install.htm#BABFDGHJ

  HTH
  Srini

• Program compatibility cannot download antivirus Avira - Avira Pre installation download program block him

  I try in vain to download the free Avira antivirus program - it blocks every time on Avira Pre installation (not compatible)

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Hello

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below:

  Thank you
  

  http://support.Microsoft.com/common/international.aspx

• Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  Setup of Windows 8 consumer priview

  Why when I run the installer for Windows 8 consumer preview on my computer of Windows XP Home Edition he says: "this platform is not supported"?

  You can see this message if you downloaded Windows 8 64-bit and XP 32-bit. To start the installation of Windows 8, you will need to restart and boot from the installation of Windows 8 media.

  If you want to keep your current installation of Windows, you can install it on a separate partition and dual boot with the Windows 8 Preview of consumer. To install on a separate partition and dual boot, you must create and boot from the installation media.

  (1) first you will need a free partition on hard drive - if you do not you can shrink a partition and create a new one to install Windows 8 Preview of consumer on.
  To reduce a partition and add a new one that you can use EASEUS Partition Master (free):
  http://www.partition-tool.com/personal.htm
   
   
  (2) to install on a separate disk, you can perform an installation DVD or USB key, then boot from it so you can choose the other partition. To download the ISO file and install media:
  Download Windows 8 consumer Preview ISO:
  http://Windows.Microsoft.com/en-us/Windows-8/ISO
  After you download the ISO file - use the Windows USB/DVD Download tool to install media:
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool
   
   
  (3) installation on a separate partition for dual boot:
  1 make a DVD or USB installation drive - to see the two options above.
  2. start from the DVD or USB install drive and click on install when prompted.
  3. during the installation process, when asked - choose a custom installation.
  4. Select a free partition on the hard disk to install Windows 8 Preview of consumer - this will install Windows 8 on a separate instead of your current Windows partition partition.
  5 continue with the installation.
     
   
   
  First of all please note:
  1 consumer preview Windows 8 is a pre-release and will only work for a limited time - when it expires, you need to remove it.
  2. the overview of consumption is stable and has been tested, but it s not the finished product. Your PC may crash and you may lose important files. You should backup your data and you shouldn't test Windows 8 Preview of consumers on your primary home or business PC.
  3. If you install the preview of consumption on the Windows partition is currently installed, you cannot uninstall the preview of consumption. To return to your previous version of Windows, you will need to reinstall from the recovery or installation media supplied with your PC.
  4. in addition to dual boot, here are a few methods to install Windows 8 Preview of consumers without affecting your current installation of Windows:
  (A) remove your current hard drive and install the Preview of consumers on a spare drive.
  (B) install it on a spare computer.
  (C) install the Preview of consumer in a virtual machine.
   
  For more information - Windows 8 consumer overview FAQ:
  http://Windows.Microsoft.com/en-us/Windows-8/FAQ

• Error "have sufficient privileges to complete this installation for all users of the machine. "log on as an administrator and try again the installation" when you try to install iTunes

  Original title:

  I just installed windows7, I had to uninstall itunes in order to complete the instalation of windows7. everything went well until I tried to reinstall itunes.

  During this process, I get the message "you don't have sufficient privileges to complete this installation for all users of the machine. log on as an administrator and try this installation again. ». but I am logged on as administrator.

  Hello

  To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

  Method 1:

  Right click on the installer for iTunes and click Run as administrator.

  Method 2:

  Disable user account control settings and check.

  Enable or disable the User Account Control

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. Disabling it can make your compromised computer. Please make sure that enable you UAC, once you have completed troubleshooting.

  Method 3:

  Allow the default Administrator and try to install it in this user account.

  a.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  b.Type in the following command and press ENTER.

  NET user administrator / active: yes

  c.Log disable the current user account and log in to the user called Administrator account.

  d.Install iTunes in this default Administrator account.

  e.Once of that installation is complete, the default administrator is disconnected.

  f. log in to your user account.

  g.Disable the default Administrator account. Follow these steps.

  i.Click on Start, click principally made programs, Accessories, right-click on command prompt and select run as administrator.

  II. type the following command and press ENTER.

  NET user administrator / active: No.

• EBS Version 12.2 CUP5 - patches of pre-installation

  Hi people,

  I'm upgrading my current version of BSE 12.1.3 to 12.2.4 referring, "Upgrade Guide reference no.. E48839-02".»

  I did ' apply AD 12.2 update driver (required) "stage which is on page #"3-4 Oracle E-Business Suite Guide upgrade.

  Now I'm going to "apply all the patches (cups) consolidated upgrade (required)" according to guide.

  I followed the DOC ID: 1448102.2.

  According to the MOS DOC, I downloaded "EBS_R12.2_Preinstall_2015_Jun_19.zip". This shows a number of patches that I need to apply with patch 18007406, mode of pre-install.

  I ran the following query on my machine, which shows that most of the products is at the level of the B.3.

  SELECT app_short_name, MAX (patch_level)

  OF apps.ad_patch_driver_minipks

  GROUP BY app_short_name;

  Output:

  ------

  PSP R12. PSP. B.3

  AS R12.AS. B.3

  FTE R12. FTES. B

  AK R12. AK. B.3

  HVC R12. HVC. B.3

  and so on...

  My question is:

  (1) do I apply all patches listed by the DOC in mode of pre-installation or only patches which the product is currently available in my system?

  (2) Let's say in my system ("PAY"R12 is at .) PAY. B.3, code level). When I download the patch against the product (i-e: 19730774), it shows that the patch is (Compatible with: R12.) PAY. C, R12.HR_PF. (C) and my current level of PAY product code is "R12. PAY. B.3. So I have to jump these patches that are not available for my current level of code?

  Thank you!

  Ali

  To download the patches one by one is going to be a tedious task you better use a download script (Wget for 12.2 clients Upgrade) provided by note 1448102.2 which will download the patches all pre-installation.

  For the line of code 12.2 is C

  Please find Note 1325930.1 what are the codelines? Codelevels?