Issue of replica of heartbeat

Similar Questions

• Compatibility issue on Satellite Pro A60-129 and USB 2.0 Port Replicator II

  It is: are they compatible? I bought the Port Replicator, loaded drivers and plugged.
  All the lights come on as it should on the 4 USB ports, and the device manager says its working properly. But if I plug the router in there (instead of directly into the USB port of the laptop), or if I try to plug in the mouse inside (once again, instead of directly into the laptop) or work.
  He also seems to have some effect on Windows - where when I try to stop the machine, it "hangs" in the section "Logging Off", until I physically unplug the duplicator.

  Any guidance appreciated.

  Hello

  I don't know what the problem is here, but you should try to download and install the latest available driver from Toshiba support page Package. You can find it under http://eu.computers.toshiba-europe.com > support & downloads.

  Product type OPTIONS
  Family CONECTIVITY
  Series of products DOCKS & DUPLICATORS

  You will find driver Package for Windows XP Home edition.

  By the way: perhaps some additional software for mouse blocks or a modem. Who knows

• III - issue of serial port Advanced Port Replicator.

  Hi, I have a few apps that do not work with usb to serial adapters. I need to know if the serial port on an advanced port replicator will not work unless the serial port was "integrated" to the computer, as they used to be in older laptops.

  Are the drivers required to make ports to work within windows?

  I have a Tecra M2.

  According to the specification for Tecra M2 Toshiba PA3314E - 1PRP Port Replicator III Advanced is certainly compatible and I guess it should work. Unfortunately, my printer has USB port and I can't test it.

• Advanced Port Replicator III and Tecra M5 - compatibility issue

  Hi all

  Had a brief search, but could not find a similar position.

  Is the Advanced Port Replicator III PA3314E-1PRP compatible with a laptop Tecra M5?

  Thanks in advance and amicably.

  James

  Yes, it is compatible, I can confirm this info above
  If you wish, you can consult the Web of Toshiba Europe site Options & accessories.
  You will find this info useful

• Apple ID security issues

  "You've done too many attempts to answer your security questions.

  In order to synchronize the BusyCal on my MacBook Pro and the iPhone 6, I need to put in place the two-step verification.   Unfortunately, this requires to respond to security issues I've implemented several years ago and I don't remember the replica.   In my attempts to guess the answers I have tried too many times and am frozen and receive the notice above.

  Where should I go from here?

  Thank you.

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  Because you forgot the answers, you will probably get told to wait awhile until you configure the two-step verification, even after having their release.

  (143281)

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• Ejection of the Replicator Express - II does not work

  The duplicator button eject does not work. I have laptop series TECRA M. downloaded the driver for duplicator of toshiba website support and reinstalled but of no use. I searched in all the forums, but did not find any thread for this problem.

  If anyone has any idea on this issue, please help. The button eject everything does and do not see an option in Windows 7 to eject the PC I did with IBM lenovo laptop with a docking station.

  Is - this top hat of Toshiba laptop what do you use?
  I want to say I put t knowledge how it works on other laptops but why you think it should work in the same way on laptop, you used before?

  You can remove your Tecra of docking station using gear hand placed on the upper side right?
  What happens after doing this?

  By the way: If you check the specs of this under system requirements port replicator s Win7 are not.

• Port Replicator III + very high CPU when you move the usb mouse only in W2k

  Tecra M2 with a port replicator III +.

  It is set to dual boot XP and Windows 2000 (yes I know it is well a bit but I have a bunch of stuff installed in win2k it is difficult to find these days).

  XP is very good at 100%, but with win 2000 if I use my * USB mouse * on the * ports port replicator and waggle the mouse around - the * CPU * jumps from 0 to * 70 + % * use (System process that seems indicatates like IRQ problem). If I plug the mouse into the ports of the laptop (when the laptop is connected) - it's fine, no more than 5% cpu usage. It's a microsoft basic mouse. I really believe that this is a problem of usb any, because the cpu jumps a little if I type quickly on my usb keyboard (only a few %). It comes with the usb ports on all the Replicator.

  Any ideas? I don't really want to plug my mouse in the morning because it beats a little interest to have a docking station in the first place! I have installed mobile extensions. All other aspects of the replicator are fine

  Martin

  Huh it will not be easy to find the right explanation for this.
  At the moment when Tecra M2 has been offered on the market as Replicator port compatible Toshiba offered Toshiba Advanced Port Replicator III (no +) and at that time both supported in operating system has been tested with it.

  Toshiba later designed Toshiba Advanced Port Replicator III + and confirmed the compatibility with Tecra M2, but obviously with more recent WXP (at this time).
  So now, you've been following situation: you use most recent Replicator port, but with much older operating system so I assume that there may be a compatibility issue with W2K.

  I can't imagine use you so often with W2K and if so, may not be so problematic to connect the mouse directly on the cell s USB port.

  Sorry, but I don't think that there is nothing you can do about it.

• Display problems on Portege M100 connected to the port replicator

  After having connected the M100 to a port replicator, I meet the following:

  Sometimes the first couple of seconds, the external screen is used.
  When Windows XP Pro login screen, external monitor off running and only after the opening of the TFT screen, I can go back by pressing Fn - 5.

  Another question:

  A minute later, after starting windows at 1024 x 768, the Exchange System suddenly resolution
  to 1280 x 1024.

  I manually switch back to 1024 each time, but the system uses 1280 after a reboot.

  Do you have any idea how DIFFICULT 1024 and how to maintain external when it is docked?

  Thanks

  Hello

  I put t know 100 percent how this fix several issues, but you should first check if updates will help you.
  For example, to check on the Toshiba page if the new BIOS, driver card graphic and display Service for external monitor.

  How the words on the display for external monitor Service:

  1.) description of the problem:
  The Intel display driver has a characteristic, as one of its characteristics, to store used display to system shutdown before and use the device to display the images when the system starts the next time, as long as the device is.
  However, this specification has attracted a large number of complaints that images were not displayed on an external monitor, but on an LCD, if systems have been used in the following way:
  1. turn off the system with the images displayed on a LCD screen.
  2. with the LCD closed, anchor the machine to a longshoreman who has a connected CRT monitor.
  3. turn on/off the system will display images on the CRT, while the system is starting.
  However, the display driver will switch the display device on the calendar in Windows JOURNAL to the screen and displays the images on the LCD screen, which is the previous display device.
  4. from the screen LCD is closed, the user will never know where the images are displayed.

  2) corrective action: update the BIOS on V1.30 or more and install the TOSHIBA display driver

• Tecra A10 - poor display through the port replicator

  I have an error with one of my clients, they have 3 x Tecra A10 is bought in the last three months, the last time being last week.

  I get a very poor screen through the port replicator, lines running through the screen almost like the lines of scanning, or RF interference. It happens on all three laptop configurations.
  We have new Phillips 19 "wide and 22" widescreen, I also tried a HP 19 "wide where else in the company. also having the same problem. These monitors are working 100% if hooked up to a computer or DIRECTLY into the laptop A10, as soon as you plug them into the cradle we get lines through the screen.

  I'm learning to communicate with the provider in order to replace it, because I have three already do the same thing, I'm pretty sure that I will receive a fourth with the same error.

  Someone else has the same problem?
  According to me, this issue has been raised on another forum, but was not answered. Does anyone have a solution?

  Please can you tell us which port replicator you use and which port replicator port?
  BTW: you are an authorized service provider?

• Satellite R15-829: keyboard & mouse will not work on advanced port replicator 3

  Hello

  I have the following problem:
  I have a portable Satellite R15 829 Tablet. I went and bought a Toshiba Advanced port replicator (PA3474U-1PRP) 3 second hand. When I plug in a keyboard and a mouse for it, they won't work. However, when I have the laptop dock and power, of the function on the external keyboard blink.

  I had a load of a keyboard and a USB mouse, and they work, so it would be a kind of compatiability issue?

  So I know that there are be able to enter them. Could be a driver problem type? Or something else? If anyone has any suggestions, I would be very grateful.

  Thank you.

  Post edited by: mur_cott

  Hello

  This device is not known to me but please check if Toshiba Mobile Extensions 3 installed on your laptop. See also the version
  Check if the latest version of the BIOS is also installed on your laptop.
  If this isn't the case, then try updating the BIOS.

• Microsoft Natural ergonomic 4000 keyboard don't work via KVM / port replicator

  I currently have a keyboard, mouse, two monitors and speakers attached to a KVM / port replicator that allows me to easily switch between a desktop and laptop.  I recently bought a Microsoft Natural ergonomic 4000 keyboard.  When it is plugged directly into the office, the keyboard works fine, but when connected by the KVM / Replicator port, it is not recognized and does not work.  I did bother to try it with the laptop but, given that I don't keep it if it won't work with my desktop configuration.

  All the drivers for the keyboard are loaded on the PC (Win7).

  What gives?  Any ideas?  I don't want to trash, but will be in the blink of an eye (more will probably say something not nice about material that is not work and play well with-the others on a review).

  Thanks in advance for your suggestions.

  Hello

  Please keep us informed of the issue and I appreciate your efforts to resolve the issue.

  I suggest you to update the latest drivers for the KVM.

  Click on the links below and download the latest drivers.

  http://www.IOGEAR.com/product/GCS932U/

  http://www.IOGEAR.com/support/DM/driver/GCS932UB

  Steps to download drivers.

  1. Select the model number (GCS932UB) of the KVW
  2. Select the driver for the GCS932UB
  3. click on download

  Try to download the latest drivers and check if that helps. Let us know the results, we will be happy to help you further.

  Thank you

• DataGuard open read only mode: PING [ARC2]: unable to connect before Heartbeat "keeps." The error is 88.

  Hello

  I created a data guard with 1 physical and 1 relief database.

  Database: 11.2.0.4 - Enterprise edition

  Everything is OK, if the wait is still in State of Mount.

  but.

  When I want to open the day before in read-only mode, log shipping is stop.

  I found az error in the primary newspaper:

  PING [ARC2]: Unable to connect to the standby Heartbeat "keeps." The error is 88.

  
  

  The newspaper of Eve:

  alter database open read only

  AUDIT_TRAIL initialization parameter is changed to OS, as DB is NOT compatible to the database open with read only access

  Wed Dec 03 12:02:02 2014

  SMON: enabling cache recovery

  Dictionary check start

  Verification of the complete dictionary

  Database character set is AL32UTF8

  No Resource Manager plan active

  off replication_dependency_tracking (no replication multimaster async found)

  Physical standby database opened for read only access.

  Completed: alter database open read only

  Wed Dec 03 12:02:03 2014

  Mo 4977 db_recovery_file_dest_size is 2.29% used. It is a

  user-specified limit on the amount of space that will be used by the present

  for the files related to the recovery of databases and does not reflect the amount of

  space available in the underlying file system or ASM diskgroup.

  Thanks for your help and sorry for my bad English.

  LACI

  Oracle error: ORA-00088

  Error description:
  Cannot be executed by the shared server

  Cause of the error:
  Debug command issued on a shared server.

  Action:
  Run the command again using a dedicated server.

• Problems with the evolution of my Datastore Heartbeat volumes?

  What everyone? I'm not sure why vCenter did that, but my heart rate data warehouses, he chose 2 warehouses of data to the storage of my worst, slow, obsolete. I want to change it to my more reliable faster storage. Should I have any problem with simply by selecting my good storage in the dialogue of vCenter HA so he could choose? It can cause the blip, vCenter HA or something bad? Thank you so much everyone.

  Change to HA heartbeat data warehouses should not cause any problem. I did a couple of times in the past and have no issues.

  André

• I do a layout of paper every two weeks; This time, when I opened my model, set up for the next issue when I typed 'W' to display the grid I have something totally different than previously, a background grid which is more annoying.  Why in the world

  new to InDesign 6 months I do a newspaper page layout every two weeks.  This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ".  The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing.  I don't know what happened, but it seems that Adobe has tinkered once more with the program.  The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column.  NOT useful.

  There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time.  (I know, without replica.)

  I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen.  What is my new Mac, or something to do with the program that I can fix it?

  Thanks, Sacie

  It looks like the grid of the document, which can be disabled in the view menu.