Issue of Switch SLM2048

Similar Questions

• CPU Upgrade - G6 2220SQ Pavilion

  I think my i3 of the 2370 M (SB) upgraded to an i7 3610QM (IB). I'm not shure if this would be a good idea because some say it could be a compatibility issue when switching from the CPU. I am sure that electrically and physically there is no problems (the chipset is Intel HM76 that supports taken rPGA 988B processors, and the processor is on the list of upgrade of the socket according to the official website of Intel). What is more, I saw the 3610QM i7 launched in Q2 2012 and laptop BIOS's May 29, 2013. CPU - Z indicates that the version I currently have is F.25, made by Insyde before specified date. Pavilion G6 2240SQ a on board an i7 3632QM, so is there a go for the upgrade or not? Features of the phone are: memory of 8 GB 1333 (2x4gb) made by ASint Technology, i3 2370 M @2.4 GHz 35W, 7670 M 1 GB GDDR3, 750 GB at 5400 RPM / MIN Hitachi HDD, motherboard is HP 1840 (56.32), chipset Intel Sandy Bridge REV 09, southbridge Intel HM76 04 REV. I look forward to your reply.

  You have probably already that, but here is the Manual:

  Manual

  The i7-3610QM is not in the list. Your logic is impeccable on why it should work, but it may or may not. The i7-3632QM will work certainly because it's on the list. The model with this processor uses the same motherboard as yours.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• VISA READ timeout error - several GPIB resources

  Hello

  I'm working on a network 3 GPIB instruments (Optical Attenuator, amplifier in fiber, spectrum analyser), controlled using VISA sessions in Labview. When it is run separately, the three corresponding screws (which are located in three different Labview projects) works as expected. However, when they ran at the same time, one gives them timeout-1073807339 VISA READ errors. These errors seem to occur when another instrument is sending / receiving data / instructions at the same time that she is.

  The exact context of the error is either:

  -an another VI is running, which includes sending several requests and responses every 100 ms, reading

  -by failing VI starts, I get an error of waiting time among the first Subvi containing a VISA READ operation to perform (sometimes initialize.vi (in situation 1), sometimes one of the subVIs connected the rest State (State 0) on the time-out of the structure of the event).

  or:

  -the default VI is running,

  -by starting another VI, which includes repeatedly sending requests and reading the responses, the failing VI up a mistake among the first Subvi containing a VISA READ operation to run (one of the subVIs linked the State of rest (0) on the time-out of the structure of the event).

  What I tried:

  -gradually increasing the delay between the VISA WRITE and READ operations to the relevant instrument (from 10 ms to 10 s), without success. More surprising are my observations which, by operating this single VI, increasing WRITE it / READ delay results in the same timeout errors. I have found no mention of such behavior through research google and forum. I hope that this may point to a solution to the main issue,

  -switching between synchronous and asynchronous VISA WRITE / READ operations.

  -reorganization of the network GPIB to a star to a linear topology topology (three instruments have different GPIB addresses in case anyone is wondering).

  My thoughts:

  It seems to me that the error is related to a delay introduced between a VISA request and its read operation by the transmission of another query associated another instrument in the same network GPIB. But I have no idea why pass a query to another instrument would introduce such a delay, or why this delay would result in a timeout error (and only an instrument, while writing / reading in each pilot screws are basically the same). Hopefully a more experienced Labview-er will be able to shed some light on my problem.

  Included is the project that contains the default VI (main.vi) and the driver custom made use of.

  There are a number of ways. If you want to keep separate projects for instruments, you can use semaphores often slandered around calls for screws in each project. Locking is not expected or predictable, but it would give controlled access to the GPIB resource.

• SQL clause 'or '.

  Hello

  I am creating a search function vi, which allows the user to search for some columns in my database with the input control 1. Is it possible to do if some of the columns have different data as string types & digital?

  I have this here vi which I use to interrogate some of the column of the same type of data in the database. It seems that there is something wrong with my 'or' clause. When the input is b / l, the part of the data displayed is correct since the firstname column won't work & the clause "and" name also will not work, resulting in all data displayed. However, if I remove the or clause for my lastname, firstname column column will work but my data for the device will not work. When the input is 1, all occupants in my database will be displayed & they will all have the same unit even if they live in a different unit. However, if I delete my request first name, leaving only the unit, it works perfectly.

  I believe that the problem happens if I use the or clause of these terms before the last clause "or" & after the last 'or' clause in my query will not work. The Address.AddID AND = PersonDetails.AddID AND PersonDetails.Status = 'active' is ignored if it is not the last clause 'or '.

  IM using data select vi to recover my data, because it is something strange happens if I use the sql execute query vi. below is my sql query & attached is my base data & vi.

  WHERE Address.Unit = 'b' or PersonDetails.FirstName LIKE '% b %' or PersonDetails.LastName LIKE '% b %' AND Address.AddID = PersonDetails.AddID AND PersonDetails.Status = 'active '.

  Thanks for reading & hope someone knows why this happens.

  Kind regards

  Wayne

  I can't open your files (got an earlier version), but I suppose you use an .mdb you have access? Do the work in question here? I have several times to build an access issue and switched to the sql mode to copy in LabView.

  Maybe a couple of brackets to fix the problem. It should not be necessary, but it might help to use WHERE ([or CLAUSES]) AND ([CLAUSES AND])

  /Y

• Trying to move from one site to another

  When I am logged on 2 web sites different narrations homepage and settings on my computer that I can't click on the icon to move the pages I have to close the first one to get to the second. Also what Rodgers home page appears (I use rocketstick rodgers) I csn do click on it off the coast by the x. Why is this?

  Please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the people who specialize in IE issues (like switching pages and the problems of closing open pages) will be more than happy to help you with your problems.  I am assuming that you are using a version of Internet Explorer and not a 3rd party browser like Firefox (but you should always post your question because they are much more familiar with this kind of probem that we are.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• USB3 recognized but slow

  Hi people,

  I host Windows 8 and Linux Ubuntu and I have two hard drive USB3. I can see them, but if I copy a file from drive A to B by car, the speed is about 20 Mb/s.

  I have E3C226D2I of Asrock motherboard and controller xHCI USB on the hosts.

  Fixed. Was a BIOS issue. Switched USB3 auto to ENABLE function

• copying files crashes on two wk2012r2 guest vm 5.5 esxi

  Hello.

  I'm sorry for the little explanation, but I'm trying to settle a strange question.

  I have a client where I recently installed an exsi 5.5 and then the 2012 3 windows essentials of r2 as vms. All is well... any run of days with zero problems. Today software house team had to start working and they began to do something as simple as copying files on CIFS. VM is the same host esxi and same data store. As soon as they Empresa stick on the destination of the copy, it crashed the Esxi host! Never seen what happens before... anyone having the same problem?

  The installation program is a server IBM (3650 M4)

  with 16Gbs of ram and a data store from an IBM 4 SAS 10 k disks mounted on a raid 5 with a total of 835 GB. I only 56 GB free now because I have distributed the space between the virtual disks for virtual machines.

  

  O wonder if this happened to any of you?

  It is a known issue, workaround: switch to vmxnet3 (after installation) or disable RSS in driver

  Linjo

• Using Audition for record VO

  I am trying to find information about the hardware that may be required to use hearing to record voice over the stories that I can use in video editing. I'm taking a video position and try to update their capabilities of editing with Adobe Creative Cloud applications. They currently have a small audio studio which is used for solo voice and using an older version of Pro Tools to record and edit audio. The system is an AVID M - Box to convert the signal from the microphone in digital form in line with Pro Tools. I would like to get rid of Pro Tools and use Audion for all my audio, recording and editing. I'm assuming that i would still need a type converter for power input microphone computer on which I am hearing running on. This same M - Box can be used for this or will it get a different piece of hardware? If Yes, what and where? Thank you.

  Hi Dan,.

  Usually MBOX devices works perfectly in hearing and recording a voiceover certainly doesn't tax its resources.  You don't mention if it is a PC or Windows system, but the steps are similar - make sure that the complete audio drivers are installed for the operating system, hearing of launch and choose MBOX as a default peripheral of entry and exit in the Audio hardware preferences section.

  I would like to talk more about your experience and your issues with switching.  Please do not hesitate to contact us at [email protected] if you have any additional questions.

  Thank you

  Durin

• Medium point charge when copy/move files

  Hello

  I'm under vSphere, ESXi, the free version, on a HP ML350 G6. The host server has 10GB of memory, processor E5620 and SATA hard disks that are directly related. I run 6 virtual machines on this particular server - very low use of resources on them.

  My problem is that when I move or copy files large (2-4 GB), the average of the load of the particular virtual machine I work at spikes in the double digits. The virtual machine is running CentOS 5.5. For the VM swap file is located on a disk separate physics than the OS. One thing I noticed, is that the hypervisor can't determine whether or not the hardware acceleration is enabled for the storage controller (Smart Array P410i). It shows as "unknown" in the vSphere client. I'm sure that this option is enabled.

  Could someone send me in the right direction on how to fix this I/O please. If you need more information, let me know.

  Thank you

  Stem

  I'm not sure the kind of hardware acceleration that André talks (VAAI) will help, even if you were to get the right storage array and vSphere license.  VAAI helps a lot for operations such as cloning VMs, creating new virtual hard disks and a few other things.  But the problem occurs when copying large amounts of files within the BONE, good guest?  If Yes, then VAAI won't make a difference.

  For what it's worth, I think that vSphere Essentials bundle is an absolutely steal to get a licensed vSphere product.  It of only $ 500 and includes licenses for up to three physical servers running ESX or ESXi, and it includes a copy of vCenter.  The copy of single vCenter is worth the price.

  It is possible that the copy of file takes up so much CPU resources that other processes are forced to wait.  How many VCPUs are assigned to the virtual machine?  Maybe try to assign another vCPU and see if that helps the issue.  Switch to another card pilot virtual NETWORK (such as the VMXNET 3 driver) can help reduce the CPU during large copies as well, but probably not a huge amount.  I'd like to see how the virtual machine works with 2 vCPUs.

  Matt

  http://www.thelowercasew.com

• I am updating of content in an old site and uses an old extension to close a page of the child.  It worked fine until I started using CS6.  The code for this is in a model that I use and the code has not changed.

  So the site is www.fulcrumcwi.com and the URL of the page is: FulcrumCWI Rebecca Morgan operations strategy Consulting newsletters.

  If you choose the first HTML link for the news bulletin when you try to use the close buttons, none of them work.  Yet if you go down in the January issue and switch to the HTML version, it works very well.  This is the code that the extension highlights:

  < form >

  < input name = "Close" onclick = "self.close (); return false"type ="button"value ="Close"/ >

  < / make >

  I have not changed somehow.  The only change is I use Dreamweaver CS6 to make these changes.  Does anyone have a solution for me?

  As always, thanks in advance.  (and Yes, I know that this site needs a major update)

  GraphicEdge

  Looks like you're missing target = "_blank" in the link "HTML" to open in a new window that works properly...

• 2 slow CARS on Node2 nodes for a particular workload

  Hi all
  
  Platform: Oracle Server Ent. Ed. 11.1.0.7 on AIX 5.3 64-bit ML10, Power5, 2 RAC nodes.
  
  Workload: consists of queries and DML for application server in the same network as DB server, via the thin driver JDBC.
  
  When the load test to the foregoing, flow to node 1 is good while node 2 is poor. As revealed by the ADDM, node 2 has much DB of time devoted to the event "SQL * Net more data from client" and this does not happen on node 1. Apart from this event, the two nodes have similar performance.
  
  The load test above is then performed again by stopping the DB on nodes and route the entire load to the remaining DB node. The result is always the same (i.e. the node 2 is slow).
  
  The load test is performed once again with the connection string changed to point to one of the nodes/instances at the same time. Node 1 works even better than the node 2.
  
  To isolate the problem, a workload only small insert is subject to nodes but this time, the performance is the same on both nodes.
  
  The response time of ping and traceroute both public and VIP addresses from the application server is the same.
  
  Have you encountered similar problem? What is the best method to insulate, either a network or a problem with Oracle? In fact, I raised a SR, and support of Oracle responded that the database was healthy.
  
  
  Thank you and best regards,
  
  Lawrence man

  Bargaining issues automatic switch port?

  Try the LAN cables to the public net tour between 1 and 2 and see if the problem goes away.

• I switch to Chrome because of problems with default printer. When can I expect this issue for a long time or my switch will be permanent?

  Whenever I change a print setting, firefox that shows the default setting. For example, I want to print a document in landscape, and now all my documents print in landscape unless I have reset firefox or I might want to print only once another printer, but now, this printer is enabled in my default printer. It is a huge pain and I got tired to reset firefox several times a day.

  I love everything about firefox, but this issue me leave.

  Please solve this problem which is the infestation of users of firefox for years! And let me know when you do.

  Thank you!

  By default, Firefox to save a setting like the new "default". You can change it to not save the settings by enabling / disabling this pref in Subject: config.

  by default Print.save_print_settings is true : double-click to switch to false.

  http://KB.mozillazine.org/about:config

• External display using Vision Switcher issues

  * Original title: external display issues

  Hi all

  I have problems with external screens.

  First of all:

  Windows 7 pro

  ATI Radeon HD 5450

  I need to be a source of the computer, a switch of vision vision. When I plug the changer (after that I got the computer, so that the true monitor displays already) the computer goes into double mode with the secondary monitor displaying only. It is, the mixer is the second monitor, and the switch does not display the vision (I go to black magic for this part of the problem).

  Unfortunately, windows + P does not change the external display settings.

  Windows + P changes display settings when I have two different monitors connected (not the selector).

  Until I plug in an external display, is there a way to force the computer to always mirror appears with two monitors output? Note that I plugged a second true monitor and changed the mirror screen and the display of these two. When I put the selector, he returned to display only mirrored, high school.

  Or y at - it a keyboard shortcut to switch the primary and secondary monitors around? Or if I could write a macro?

  Just to say it again - I do not see the computer where no matter what windows.

  Thanks in advance!

  Hello

  I understand the inconvenience caused. Let me help you with the issue.

  This could be a problem with the display settings. I suggest you to this first set the primary monitor as the primary monitor. Follow the steps from the link http://windows.microsoft.com/en-IN/windows-vista/Change-display-settings-on-multiple-monitors.

  Connect the switch, then check if the problem persists. If the problem persists, then update your drivers for your adapter display card on the Web site of the manufacturer and the device and check if it helps.

  Just reply with the results and we will continue to help you further.

• Animation switching Office issues

  Does anyone else know a different animation in the Yosemite Sierra? Switching between desktop computers, the files animate as well and will be geek sometimes. Just curious, if it is a bug. I also have problems with the desktop image not resizing not between my Apple screen and the laptop, but one thing at a time. Thank you!

  Link to screenshot: https://www.dropbox.com/s/tl2bb1el5p4trs7/Full%20Screen%20Switching.mov?dl=0

  Hello SixThreeThree,

  Welcome to Apple Support communities. I see your message and your video as the glitch icons visually in the transition from desktop computers. I know it shouldn't. I'll be more than happy to help.

  Since it is a Visual problem, I recommend you to reset the NVRAM. This is the temporary video memory. Instructions that are below:

  How to reset the NVRAM on your Mac - Apple Support

  Once done, test to see if it happens again. If so, it wouldn't hurt to test this question on a new user. Take a look at this article:

  How to test a question in another account on your Mac - Apple Support

  Take care!

• LAPAC1750PRO &amp; Cisco 2960-S - LACP issues Switch

  Hello community,

  I currently have a layer 2 Cisco 2960-S switch. It has 48 port Gigabit Ethernet ports and 4 SFP ports. I have Setup 3 VLAN on the switch VLAN 10, 11, 255. VLAN 10 is for my home equipment, VLAN 11 for my Audio/video/server equipment and VLAN255 is my network of comments. It's all behind a normal router from D-Link 4 port every day. All correctly connected working processes.

  I have the LAPAC1750PRO access point, I went ahead and ran 2 Cat6 cables so I could take advantage of the link aggregation 802.3d of the Access Point. I configured the passage from what I can tell properly. The problem is that when I turn on the two links AP causes beating port and stop passing traffic. If I disable the second link (leaving the active primary link) everything is stable. Speed is decent on my laptop, and from my iPad, it's fantastic.

  Does anyone have experience using the Protocol LACP (link Aggreagtion 802.3d) with this Access Point? I really want to use this so I can get 2 Gbps throughput of this device to my other devices.

  I'll be happy to post my Cisco Configuration so if someone is paid enough in that as well.

  Thank you

  Jason

  Senior Network Engineer

  OK - I thought about it. He was not at all a problem with the switch or my setup. This is the problem...

  Here's the question – and how I fixed it.

  1 cisco switch - Configuration:

  !

  GigabitEthernet1/0/1 interface
  switchport access vlan 10
  switchport mode access
  spanning tree portfast
  channel-group mode 1 on

  !

  interface GigabitEthernet1/0/2
  switchport access vlan 10
  switchport mode access
  spanning tree portfast
  channel-group mode 1 on

  That's right - this force LACP on the unit and do not have to worry about negotiating/connections protocols.

  2. access point - if it is already configured - factory reset the unit. LACP must be enabled during active keybord with DHCP boot. After that you can configure it as you want.

  What I had to do so was by default the access point and let it be starting with LACP rebuild - I wonder if this is due to something in the firmware that, once the NIC is configured, they become hardcoded and do not change to different settings?

  Whatever it is - this problem is solved.