Issue of WIndows 8 Internet

Similar Questions

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• Install Adobe Flash Player on Windows and Internet Explorer?

  Is - this now of paramount importance that Adobe Flash Player, will also be installed on Windows and Internet Explorer? After decades of semi - master the computer, I find this embarrassing question for me. Lately, Adobe Flash Player (Shockwave) has become a pariah for many due to its hostile structure and arrogance from Adobe to help! Up-to-date facilities have been substantially no problem. Now, speaking on behalf of all the tortured, are we not all exhausted trying to fix things? Yes! Well, if is my madness of query, or is there a grain of truth? Earlier that apply forward. Thank you!

  https://www.Adobe.com/products/flashplayer/distribution3.html

  IE uses an ActiveX version while web browsers such as Firefox and SeaMonkey uses the base plugin version.

• Gives Windows Update: Internet Explorer cannot display this webpage

  MS Windows XP Home Edition version 2002 SP 3 Norton Internet Security 2010

  Start button...  Windows Update... immediately pops up a window of Internet Explorer 8, saying "Internet Explorer cannot display the webpage."  with a diagnose connection problems button leading to say there is nothing wrong with the connection.  No error code is displayed.

  Tried several times over several days.  Not good.  Tried to type the URL in the address field.  Same result.  Tried to access various Microsoft Windows Update web pages from within the Microsoft site.  Same result.  It almost seems as if "windows" & "update" is in the address, it does not connect.  I tried Windows malicious software removal tool.  No solution.  Tried all the Norton Scans.  No solution.  Completely removed Norton.  The same problem.

  Windows Update worked until we made an update of Windows in 5/10, date at which we replaced Internet Explorer 6 with IE 8.  Since we cannot get Windows Update.

  He could have something in the updates of Windows that blocks access to the updates?  He could have something in IE 8, which blocks access to updates?

  Please don't give me the answer 'wipe the hard drive & reinstall Windows '.  It's a typical 'COMPUTING solution' which means 'I don't know what the problem, then that & everything will be fine.'  But in doing so, it will result in DAYS of relocation & configuration of all programs on my PC!  If you don't know the problem, tell (or do not).  If you KNOW what is really causing the problem and have a solution, I would be VERY grateful to hear from you.  Thank you.

  I had this problem in my store with several client computers.

  Scenario - IE browse websites ok. But when you try to manually run the updates of Windows, internet explore announcement that that the page cannot be displayed. The same also happens with Microsoft Updates.

  I read a lot of discussion online, and many people do not yet have a solution.

  Here's what I found... and every machine I have dealt with regard to this problem, in the last 4 months, have all had a rootkit virus infecting NETBT. SYS file in windows. Analysis tools more do not seem to pick up well. AVG, Malwarebytes, Norton... I know that these three would not pick it up.

  Launch the latest Combofix it cleans well. If there is. And so far, I have managed to solve a good 6 computers by replacing the NETBT. SYS file.

  So, if all else fails... check that. ;-)

• my friend told me while updatng windows via internet, virus attacks. is this true? __

  my friend told me while updatng windows via internet, virus attacks. is this true?

  Hello

  He's probably referring to the malware that can attack a system if no firewall is running the
  the installation is complete. Happened a bit with Windows XP. Vista comes with a completely
  Firewall active and should not have this problem. In fact, the problem was fairly well controlled
  with the active firewall included with Windows XP SP2. Firewalls are active and enabled by
  by default, before the network starts.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows XP - internet after switching to Comcast

  Original title: bishopoz

  Operating Windows XP, internet works fine when you use AT & T UVerse and phone of MagicJack. When I cancelled AT & T and switched to Comcast XFinity, my internet no longer works on my PC (works fine on my MacBook).
  I went through the message-based command prompt "Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address.
  still nothing happens. What can I do?

  Check the answer in the following thread and follow the steps mentioned in there, which should be useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/how-do-i-renew-your-IP-address-to-repair-my/63c8c9f4-22b0-40DA-80f2-1c97ee9c7af1

  If you have already run these commands, follow these steps:

  1. Open a command prompt.
  2. Type in the following command and press ENTER:
     netsh int ip reset c:\resetlog.txt
  3. Once the command has been executed, restart the computer.

  I hope this information helps!

• Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  original title: error 5 access denied firewall

  Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »

  Hi vipin sharmavg,.

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• Not able to start the Windows firewall/internet connection (ICS) service on the local computer for sharing

  It is said

  ERROR 2: THE SYSTEM CANNOT FIND THE SPECIFIED FILE

  When you try to manually start the Service. !

  System log gives:

  7035 (service has been successfully sent a start control.)

  7036 (service entered the stopped state.)

  7023 (the Windows Firewall/Internet Connection Sharing (ICS) service terminated with the following error:)
  The system cannot find the specified file. )

  Where is the specified file (which newspaper where)... ?  If I have a lack or a file corrupted how can I overwrite this file by a valid... ?

  Any help appreciated

  NVM...

  Its a Virus Rootkit,

  Download the (free) Rootkit in Kaspersky killer

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.zip

  Simple to use... Unpack... then

  Run... (Note disable any local Antivirus that is running)...  TDSSKiller.exe

  * Access to the restored Winupdate site, Miss-Direction has stopped.

  * Updates Windows restored.

  ICS Windows Firewall/Internet (ICS) personnel started successfully

  Thanks to "Joyce Liang (MS) Windows Update Support"

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• Enable the Windows XP INTERNET gateway

  Hello

  I'll put up my NAS to allow me to access my office remotely. During an installation of the wizard provided by QNAP, it cannot detect my router UPNP I already enable UPNP option. I run then a few UPNP test and he advice me to activate INTERNET gateway. Can you please give me a guide on how to enable the Windows XP INTERNET gateway? I can only find guide to activate Vista and Windows 7. Thank you very much.

  Kind regards

  Chang

  Here is my config

  Windows XP (SP3)

  NAS QNAP TS-259pro +.

  Router Linksys WRT320N

  Hello

  I suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/821371/en-us

  Hope this information is useful.

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Can I delete the C: | users\radrhino\app data\local\microsoft\windows\temporary internet\files\content.ie5...etc

  Can I delete the C:\users\radrhino\app data\local\microsoft\windows\temporary internet\files\content.ie5...etc without damaging my computer?

  The error after I try to open a WMV file in an email shows the above that "the parameter is incorrect" and I can't open the wmv file.

  Check the suggestions in discussions below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/cant-open-WMV-files/e33f0e01-E838-483f-8E6F-7098b643592f

  You can also check what type of file has .wmv files.
  Go to the control panel. Click default programs.
  Click associate a file or Protocol with a specific program type.
  Highlight .wmv and see what kind of program is to open these types of files.
  By default, there are Windows Media Player.

  If it's another program, change to Windows Media Player and then try again to open the .wmv files.

  Let us know if that helps.

• Spybot Search Destroy & detected "microsoft.windows.security.internet Explorer.

  What is MICROSOFT. WINDOWS. SECURITY. INTERNET EXPLORE Spybot search & destroy found the file. Can I remove or ignore.

  You will find in favour of Spybot in these forums: http://forums.spybot.info/

  Tip: microsoft.windows.security.internet explore is an NNTP address for it now interrupted (on MS newserver) security IE specific newsgroup, always available via some package newsservers & Google groups, but there is nothing but spam messages now => http://groups.google.com/group/microsoft.public.internetexplorer.security

• Windows Explorer, Internet Explorer, even aid keeps crashing on Vista Ultimate 64 bit

  I loaded Vista Ultimate x 64 and it starts fine, but when running if I use Windows Explorer, Internet Explorer or even the help option, it stops (the app not the operating system).

  When I use IE7 it tires to access a URL, then says "Internet Explorer has stopped working".  When I click on the tab that says 'Find a solution online' or something to that effect, it can't find anything and shuts down.  I am able to browse websites with Firefox.

  Also, when I download a 32-bit application as the cleaner _, he warns also an assertion error.  If I try again, it downloads and then I get the error:

  ccsetup.exe is not an application Win32 valid Huh?  I run it on multiple CPUs 32 bit on other machines.  Y at - it something wrong with my Windows 32-bit on Windows 64-bit application.  I ran all the diagnostic tests and there doesn't seem to be anything wrong with the disks, or other materials.

  Hi nt5engineer,

  Thanks for posting on the Forum of responses of Vista.

  Is this a beta version of Vista?
  Your screenshot does not appear on here.
  You can use a free host of images photo, most are free.

  I've seen the same behavior in the past, but it is from a beta version of Vista.
  No idea what software this might be:

  'D:\longhorn\ds\securityproducts\...\dynami...ues.cpp '.

  The file extension "CCP" seems to belong to the C++ developer files.
  You do programming on this computer?

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.