Issues of speed and bios USB

Similar Questions

• Equium and other laptops in general and the Usb 2 speed with stuff problems

  Hello

  I use a programmer TOP2049
  I can't use it to program certain types of chips using the laptop.
  Main machine can reduce the speed of the usb to 12mbps but the laptop cannot reduce this in the bios

  Is there a way to do this?
  Does anyone know?

  If so tell us... TIA simeonW

  Hello

  BIOS of laptop computers is different and it does not support the same functions as BIOS for a desktop PC.
  In the BIOS of the laptop, you cannot change the speed of the USB.
  To my knowledge, this is not possible.

  Welcome them

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• IE is slow, hangs in Google, will run Firefox under Windows 7 with speed and security?

  I'm not very tech savy English so good please. I have a desktop Dell Studio with Intel 2 Quad Processer. I have used IE for 15 years and more. Started using Google Chrome for speed and better security about 6 months without any problem. Shortly after the beginning of the year Chrome started crashing every day and from 1/14 he broke the 10-12 times a day. I don't like losing stuff and having to stop, re - load, raise or re-store that Chrome was more than that was working properly.

  Will Firefox work in my system operating system. I loan on your security, password protection and other things that are touted on your website on Firefox, but I'm mostly concerned about accidents and what are the causes. Is the problem in my own system and not questions of brower?

  I just want to surf, read, watch you tube, facebook with friends and family. I am 65 years old and retired, and I'm really disguested with all the problems I encounter.

  I think Firefox is a good product, but I need answers to the questions I asked.

  We hope to hear from someone very soon on the issues that I raised. If I download Firefox, should I uninstall IE. I already have an installed Chrome =.

  Thank you
  Jim Yeary
  jyeary3 @ spring TX

  I do not know what is causing your Chrome or IE falls down, but you can give a Firefox. I'll give you a few different things you need to do before installing Firefox to make sure that your computer works well if.

  Install all Windows updates. Check several times until there is no more.

  Update your graphics Driver. Update your graphics drivers to use hardware acceleration and WebGL

  Scan of malware: troubleshoot Firefox problems caused by malicious software

  Once you have done this, install Firefox! How to download and install Firefox on Windows

• Difference between BIOS version 1.40 - win and BIOS 1.40 - trad

  What is the difference between version 1.40 - win and BIOS 1.40 - BIOS trad?

  Win version is the version that we can and must be installed when Windows is running. It runs as an application.

  Traditional version is the version that must be installed using the floppy or USB key.

  Interesting paper on updates to the BIOS, which you can find on http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm

  Check it out.

  One more thing: what model of laptop and operating system are you using?

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• What are the speeds of the USB?

  I bought a USB memory key, it's USB 2.0 2GB...
  Can someone tell me why I can't use this Flash DRIVE for ReadyBoost?
  What are the speeds of the USB?
  Kind regards

  Hello

  Can you please tell me how should he know the speed of this USB stick if you n t writing details on this sick USB?
  We are not blind!

  However, I think you know the manufacturing of this USB so why you don t google a bit and you are looking for more information.

• Satellite C850 - slow fan speed after BIOS update

  Hello

  So I have my bios Satellite C850-PSKCEV update version 6.80 (I bought my laptop in 2012), about 6 months ago and since then the fan turns at low speed and will never run full speed as before, and therefore, the laptop overheats prematurely and very quickly and even when the laptop is not in use but market it overheat also game isn't possible as any game that I run (even with the smaller settings) Gets a drop in fps every 5 seconds and lasts for 5-10 seconds that makes even the lightest unplayable games, also I have fear of the continuous overheating of components of the laptop.

  I clean the fan and vents the dust and there is not even a particle inside of them and still the fan will not run fast and I can't feel but very slight air flow from the orifice as apposed to tough before this problem.

  Laptop model Toshiba Satellite Ref. C850-A811 PSKCEV-00S00FAR
  Intel Core i5 2450 m - AMD Radeon Hd m 7670
  8.1 Windows 64-bit

  After updating the BIOS, you should enter the BIOS and should load the default settings.

  In addition, you can try to decrease the max CPU to 98-99% performance.

  This can be done in the settings mentioned by Liam and to be honest, this change would not really affect the performance of the laptops.

• QUICKY ON T21 and pcmcia USB 2.0

  Hello

  If I put a usb 2.0 adapter in my T21 it will give me speed and USB 2.0 ports? (480 Mbit/s?)

  or I'm too stupid to keep breathing

  I think Yes, but expected a no, for dissapointment comes expectations!

  whaddayaknow?

  Thank you!

  lukkbox wrote:
  

  Hello

  If I put a usb 2.0 adapter in my T21 it will give me speed and USB 2.0 ports? (480 Mbit/s?)

  Thank you!

  It should be.

  Maybe if you just ask a question and leave out parts like this:

  lukkbox wrote:

  or I'm too stupid to keep breathing.

  My apologies for wasting your valuable time with a question which is obviously below you all

  I only hope that someday I'll be so well informed as to completely ignore others less knowleadgable than me

  No, wait... No, I don't

  COS then id be a grasshole

  people would be more likely to respond to your questions.

• Insulator usb and GPIB-USB-HS

  Hi all!

  I'm trying to control a range of aglient with a labview program.

  everything works well, but for my application the scope must be one reason other than the computer.

  so I bought a usb isolator: http://www.bb-europe.com/product_family.asp?FamilyId=651

  but when I plug the reach through it, it is no longer recognized by windows. If I plug the GPIB-USB-HS only, it is not recognized nor.

  GPIB standard speed is 1.8Mbits / s, so I chose the UH401SL (low speed), and the GPIB-USB-HS is compatible with USB 1.x, so for me it is not a problem of transfer speed...

  any ideas?

  THX

  Power would have been a problem, but the speed was probably just as well. The GPIB-USB-HS is designed for USB 2.0 high speed, but also works with USB 1.1 Full Speed(12 Mbits/s). It is not designed to work with USB Low Speed, because most computers with USB implemented USB 1.1 or later. It is virtually impossible to find a USB port that does not support Full-Speed at, but apparently this insulator is an exception. Low speed is usually reserved for devices with needs bandwidth close to zero, as keyboards.

  I must also point out that the maximum speed of the GPIB-USB-HS is 1.8 MB/s, which is of 14.4 Mbps, before taking into account overhead Protocol USB or traffic from other USB devices on the system. This puts a little above the capabilities of Full-Speed USB, and much more than can be supported with USB low-speed.

  -Jason S.

• external hard drive and the USB does not

  When I connect my external hard drive or my USB which do not shown anymore.not or work

  Hello

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
  is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
  or other stores) or system manufacturer support.

  ------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
  as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
  Is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My sm bus controller and controller USB driver not there (read for detailed explanations)

  I have a laptop, it was windows 8.0 and I upgraded to 8.1, I didn't like it at all so I lowered it to win7 because it was laggy and the displayed text was fuzzy. I knew that something was wrong with the installation of windows 8 and even after a clean full format, he would not return to normal. I went and he downgraded because I had enough and know that windows 7 would be faster for this pc (which it was), I said yaay sound much smoother and faster with no problems.  Then I installed all the wifi, bluetooth drivers, mouse etc... only 2 things that I couldn't install was the bus controller SM and USB bus controller driver (USB). And my usb slots were not working other than port 3.0 I had a plugged usb of decommissioning...

  I know its something to do with the bios and since the update of the bios is 8 - 8.1 windows only I don't know what to do... I have a .wim file recovery and I don't know how to use it. I also forgot to put my product key of my pc of win8 before I went down I had no knowledge of what happen and don't think it would be a problem...  Now I can't connect more than 1 thing at a time. I went on the microsoft forums and they fixed a problem (ethernet driver) and told me to come here and I hope you can fix the rest.

  Thanks to adnvaced for your help

  The laptop is HP Pavilion Sleekbook 14-b006au
  Serial number: 5CD2490Y40
  Product number: C7D41PA

  Please can someone help me I really want to stay under windows 7 is it possible that someone could get an update of the bios manual for that laptop or something like that. Except that everything works fine!

  Here's a linnk to MS32 (computers)

  http://1drv.Ms/1u6Z6DP

  Hello:

  Here are links to the drivers you need.

  1 SMBus: Downloand unzip and manually install the driver for smbus controller I have attached under attachments below.

  Go to Device Manager and click the controller smbus needing drivers.  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.  Then restart.

  2 USB3: Download and install both of these drivers and restart.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_137148_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Cannot adjust the brightness of my screen. It is located at full speed and my dough goes super fast.

  My Sony Vaio w/Windows 7 recently crushed and Geek Squad put in a new hard drive. Everything works fine except that I can no longer adjust the brightness on my screen. It is located at full speed and my dough goes super fast. Please help me solve this problem. Thank you!! :) - AdamH

  Original title: help! AAARRRGG

  They installed drivers for devices from Windows 7 for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Sony: http://esupport.sony.com/perl/select-system.pl

  Another way to find your computer manufacturer's support Web site.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Also to check the graphics card Sony or download site of manufacture for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Tecra M9 - reader of fingerprints and BIOS password

  Aloha
  I want to disable the fingerprint reader and bios password at startup of the computer.
  I already uninstalled upek protector suite ql 5.4.0.2934, but at the start, I'm still prompted to slide my finger.
  I've seen and followed the instructions in "toshiba passes: definition and suppression (BIOS passwords, supervisor and Windows)", but I still have to enter my password to start the computer.
  What should I do?
  Mahalo

  In the field "Enter new password" press only in order to remove the old drive HARD password... Repeat this in the field "confirmation"...
  Then he must change the password for HARD drive status to "unregistered".
  After that, save the BIOS changes and exit the BIOS.