It is not available in my Windows 7 Ultimate 64 - bit DirectX DirectDraw.

Similar Questions

• Sir my network smart vaio does NOT start after installing windows 7 ultimate 64 bit

  Sir accidentally my real Home Basic 64-bit is formatted when installing Ubuntu 13.04 in a separate disk.

  I have no backup to restore the window as recovery is also formatted.

  I installed windows 7 ultimate 64 bit and all drivers related to it is on th website:-http://www.sony.co.in/support/product/sve15115en/download

  including the original software and driver patches.

  but after that my network manager smart vaio does not work its present only in the menu start when I clicked it nothing happens.it nevers opens.

  Please help me

  do a system restore disc. contact https://www.sony.co.in/section/contactus

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Location is not available. C:\windows\system32\config\systemprofile\desktop is not accessible. Access is denied.

  Ball Msg: unable to connect to a windows service. Windows could not connect to the service user profile Service. The problem prevents limited users to logon to the system.

  I was trying to deploy 1 Vista image on 4 laptops. I installed Vista Business (32 bit) on 1 laptop Dell Inspiron 1318. After I installed all my applications, I ran sysprep and has shutdown the laptop.

  Then I used the Migration of Paragon Hard Disk Manager 2009 HDD utility make a clone of bit by bit of disk SATA (75GB) notebook #1. (Previous attempts to use ImageX has failed) After drive cloning, I inserted the clone into an another Laptop Inspiron 1318. The installation of Vista program began with the EULA and I created a new account user (an admin a/c).

  When I tried to connect, I got the message: "the location is not available. C:\windows\system32\config\systemprofile\desktop is not accessible. Access is denied. "and the ball above message.

  I researched and found info telling me to reset the ACL in my desktop connection folder and systemprofile desktop folder. I've done those, but they have not resolved my situation. Another post said to create a new admin account. I did it too, but it did not solve my problem.

  I am unable to use any GUI interface after the half-login. I have to use the safe mode and the command line to get anything done.

  Help, please.

  Hi Phoogie,

  Your computer is connected to a domain?

  You can follow the steps mentioned in the link below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/default.aspx/KB/947215

  You can follow the steps provided by Zaki J, Microsoft support engineer dated from Monday, November 23, 2009 02:49 , see the link below for the steps:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/8adbc6ac-64C5-4418-9223-95c92d2dc958

  Please post if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• In trying to e-mail a picture in Windows Photo Gallery, I get this error: not available addresses or Windows Mail is not available.

  Trying to email a photo from the Gallery of photos that has been analyzed and get error msgs re: addresses http not available or not available using Vista Windows mail. Sure system for Windows Live Mail as summer send and receive e-mails from the change. The printer does not know Windows Live Mail? How can I send a picture? Am using HP OfficeJet 4500 and desktop computer, if that helps.

  thanx, Sylvia

  original title: Lost trying to e-mail scanned photo

  If you manage your emails with Windows Live Mail... maybe you need
  to set up Windows Live Mail as your default e-mail client.

  See the following links:

  Windows Vista - change the default e-mail program
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-default-e-mail-program

  Windows Vista - configuration of the default mail Client
  http://freeemailtutorials.com/microsoftWindows/setDefaultEmailClientOnWindowsVista.CWD

  How to restore or remove Windows Mail of default programs
  http://www.Vistax64.com/tutorials/186933-Windows-Mail-restore-remove-default-programs.html Windows Vista - Make Windows Live Mail Windows default email program
  http://www.freeemailtutorials.com/windowsLiveMail/optionsAndSettings/setAsDefaultEmailProgramOnWindows.htm

  Also... you could open a new e-mail Message in Windows Live Mail and
  attach the picture to the message.

  And... what happens if you go to your pictures folder and find the photo in
  question... then make a right click of the photo thumbnail or file name and
  the menu... Choose... Send to / recipient.

  FWIW... If the photo was scanned and saved in your photos
  file the printer would not be involved.

• EliteBook 8470p: EliteBook 8470p USB 3.0 ports driver not installed in Window 7 Ultimate 32 bit

  Dear Sir.

  I am facing problem in installing driver for USB 3.0 in EliteBook 8470p on Windows 7 Ultimate 32 Bit Port. So please say if 32-bit is taken in charge or 64-bit supported for USB 3.0 driver.

  its two USB 3.0 ports doesn't detect the USB 2.0/USB 3.0 or USB key (Flash DRIVE, portable, etc.)

  Please answer soon

  Hello:

  The usb controller you model posted ID indicates that your laptop is not a p 8470, but a p 8460.

  You need this driver usb 3 to this ID.

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe

  The 8470p have the Intel USB3 controller and the 8460 p have the Renesas Electronics USB 3.0 Host Controller.

  That's why I finally asked for hardware ID, because if you had a 8470 p then or the other of these Intel drivers I posted should have worked.

• Windows Vista Ultimate 64-bit will not be in service

  Windows Vista Ultimate 64-bit will not be in service.

  I read the other posts and have followed the suggestions. Windows does not start without failure, or any other option in the F8 boot options. Next step is to create a disk to repair windows, Dell did not provide a when the computer was purchased. Can work from any vista repair disc, or I need to find one suitable for my windows edition? Where are these on the Microsoft Web site?

  Thank you!

  Thanks for the help. Sorry for the vague information. I was finally able to diagnose memory problems. I have reset the chip memory and repaired the computer by using the option "repair your computer" F8.

  Once again, thank you for the help.

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• My themes are not working in my Windows 7 Ultimate

  My themes do not work in my Windows 7 Ultimate. The current theme will briefly Flash on during the shut down. Theme services are running and the other says/manual start. I'd like some help on this one! Thank you.

  I just checked some of the solutions and the other worked. Ease of access > make computer easier to see > uncheck the box "remove background images."

• Netflix appearing does not in media center on windows 7 ultimate 64-bit edition

  I have windows 7 Ultimate 64-bit.  I try to get the netflix option if displayed in Media Center, but do not have a chance.  I ran the command prompt commands to try to make it work that I found on the internet (http://support.microsoft.com/kb/972496).  I tried also deselect the media library and it has been uninstalled and I reinstalled it now.  Still no luck.  What other options do I have? Shannon Ramirez

  Netflix is not released for Windows 7 and yet you should see it appear around the 22nd.  If you have installed the netflix for vista you'll want to uninstall.

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  I have an Epson Perfection 1640SU. My operating system is Windows 7 Ultimate 64 bit. Epson does not a driver for 64-bit. If I install Windows XP mode, I will be able to download the driver of Epson XP and use this scanner?

  Best way for you is to use Vuescan. I use it in conjunction with a Canon Lide 30 and it works very well...

  http://www.Hamrick.com/

  There is a trial version... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• After the installation of Windows Virtual PC on my Windows 7 Ultimate 64 bit system it does not appear in the start menu. How can I fix this so that I can run Windows XP in Windows Virtual PC?

  Windows 7 Ultimate 64 bit running on an Intel i7 2600 system with an ASUS P8P67 motherboard.  Intel virtualualization has been enabled in the bios.  Windows XP mode has been installed on the system and the operating system has been updated with Service Pack 1.  Windows Virtual PC has been downloaded and installed, but does not appear in the start menu in the programs list. Now download for Windows Virtual PC will not allow to install another, nor that the first installation can be uninstalled because it is not on the list of programs. Virtual PC folder of Windows in the Program Files x 86 folder has only a folder with two files integration components; IntegrationCompnents.iso and Precompact.iso.

  It should be in the menu... Virtual PC / XP Mode or something. I don't know, I don't use win7 atm

• AutoPlay does not work, Windows 7 Ultimate 64-bit

  I have Windows 7 Ultimate 64 bit on my gateway SX 2800, AutoPlay does not work with anything, DVDs, CDs, thumb drives, nothing. When I got my PC it had Vista Home Premium 64-bit and AutoPlay works great, now that I've upgraded to Win7 it doesn't. I went through the steps in Control Panel to configure automatic execution, but nothing helped. Help, please, thank you, Ted.

  See this link-

  http://Windows.Microsoft.com/en-in/Windows7/Troubleshoot-AutoPlay-problems

  If she does nothing then run SFC

  1. open an elevated command prompt.

  2. in the elevated command prompt, type sfc/scannow, and then press enter

  _____________________________________________________________________________________________________________

  Telloin

• Windows Search service works is not Windows 7 Ultimate 32 bit

  I have been using Windows 7 Ultimate 32 bit for a while but noticed a few months that indexing does not work. When I try to repair or rebuild, I get a message: the windows search service is not running. No "automatic" repair seems possible. I checked all virus/spyware/malware problems and the system is clean.  Any suggestions?  Not having does not have access to this function severely limited my ability to find things on my own computer!

  Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.

  Enter the following command and press ENTER:

  regsvr32 filemgmt.dll

  Restart Windows and check if you are able to start the Windows Search service.