ITunes installed now my computer does not

Similar Questions

• just installed thinkpoint... now, the computer does not turn off

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  Hello

  Downloaded thinkpoint... now the computer does not turn off

  never had this problem before.

  ThinkPoint can be a virus, google for info also run superantispyware and av prog.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• Uninstalled McAfee, now the computer does not start - crashes at MUP. SYS

  Hi new to the forums here - I'm pretty desperate at this point - here's the game:

  I guess that the problem lies with the uninstall - never had any problems before and did a reinstall of fees<1 year="" ago. ="" computer="" is="" only="" used="" as="" htpc="" and="" occasional="" web="">

  McAfee, asked me to reboot after uninstall so I agreed.  I assumed that I would run the McAfee removal tool once the computer has been restarted, but now my computer freezes right on a black screen after the initial startup.  When I boot in safe mode, the computer hangs on the last file MUP. SYS.  I have left on all night, still will not get past the MUP. SYS

  I have run chkdsk and found 0 errors.  I also followed the indications of MS here: http://support.microsoft.com/kb/307545 does not.  I used Hiren boot and back up my data.

  Running XP MCE 2005 cumulative 2 - SP3.  The computer is a Sony Vaio - so I did not have a full XP disk, only the recovery discs (thanks to strip sony!).  I downloaded a copy of the recovery console which I can boot to.  Is there a way I can run the MCPR.exe since the recovery console?  What else could be the cause? Thank you very much!

  PS I also unplugged all devices except for my keyboard and mouse.

  Unfortunately I do not know which files to delete McAfee.  I guess there could be hundreds of them.

  I sincerely apologize for bad reading you post. The problem was more than likely caused by the process of uninstalling McAfee. Hang up on MUP. SYS actually has nothing to do with the Ministry of the INTERIOR. SYS file. It is simply the last file loaded by windows when an attempt to start in safe mode has been selected. There are a number of issues that can cause this error. As I said above, in your case, it was likely to McAfee.

  Follow the instructions below carefully to perform a restore of the system using Microsoft Diagnostics and Recovery Toolset (MSDaRT). You will need a computer to work with a working cd rom and a dvd/CD blank.

  Download and install ISO Recorder version for the operating system of the non-working computer to work.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download and install the Microsoft Diagnostics and Recovery Tool to the work computer from the link below, choose the default installation during Setup.

  http://www.Softpedia.com/progDownload/Diagnostics-and-recovery-toolset-download-100885.html

  CD blank insert in your cd/dvd burner. Navigate to C:\Program Files\Microsoft Diagnostics and Recovery Toolset and right click erd50.iso, select and then copy the image to a CD . Follow the instructions in this link to complete the creation of the bootable cd.

  http://isorecorder.alexfeinman.com/HOWTO.htm

  Once completed, restart the PC with the cd in the drive and start over the cd to verify that it works correctly. If successful in the computer non-Boot.

  Boot with the cd and when prompted, connect to the operating system (should show C:\windows).
  

  Once connected, click Start > system tools > system restore
  The interface of the system restore opens where you can choose to restore the system to an earlier time.
  

  Select the restore point, follow the guests and restart when prompted, remove the cd during the reboot.

  Kind regards

  Joel
  

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Delete system 32 files, now the computer does not work.

  Hi all, I received a virus there is a day of a program called Internet Security 2010 for me (I think it's an advanced antivirus remover or something a long these lines..)

  In the case, I did a scan of the system with AVG and BitDefender, nor presented with something else that the virus still persists. I took to google and then made to spybot, once you have downloaded and installed, spybot was the source of my problems and showed that helper32.dll and smss.exe in my System32 folder where the two infected. Knowing this, I deleted both of these files, but some issues (such as Mozilla blockin automatically to sites like facebook)... I advanced and downloaded malwarebytes. ... I run another scan encounted three more errors, helper.dll has been infected, still, so I tried to delete it once more, but I need permission to do so.

  In a stupid gesture, I moved into my office, almost desperately tryin to get rid of, renames, tried to remove it, permission, so now there remained
  I've renamed helper32.dll and put back into System32 filefolder. I also downloaded Microsoft Security Essentials.

  In the case, something, I think in my registry, or maybe in my services I messed up, because whenever I connect to my computer, I get a popup of the saying of the toolbar "Windows could not run services" and something to reject llimited to users to access certain things. " In addition, my internet does not connect and says "service incorporate or group does not" or something of the sort.

  I have remove the somethingI wasn't supposed to? How can I change? In addition, the system restore will not work and keeps telling me an unknown error occurred and tells me to pick another point to restore, but says that with every point, I try to restore, as well, I have no backup of windows.

  For the record, I am running Vista 32-bit Home.

  Can someone help me?

  Hi Anarchoi,

  You are able to get to a command prompt?  If so, run SFC/scannow to replace missing or damaged files.  Let us know if that helps.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed Windows 7 upgrade - now my computer does not start - what do I do?

  I tried to upgrade to Windows Vista 64 for Windows 7 64.  During installation to 75% of the last step, the computer "hung up" for hours.  I abandoned the installation to fail.  Have no idea why it does not have since I ran the compatibility test, deleted all the programs of conficting, anti-virus, etc.

  Now, I can't get the computer to boot.  I tried to go the last good start with Vista 64 and the operation failed.  I also tried a variety of corrections that are posted on several forums.  All I can get is a continuous loop of the attempts to start (for example. Windows - Vista - HP diagnoistics of screen - screen black screen prompts - and then he repeats)

  Without success, I tried to do a system restore - which also failed.  Any suggestions on how I can recover the system and try the upgrade again?

  Clean install Windows 7 with upgrade media
  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp

  Clean install Windows 7 with upgrade media and the product key on formatted or empty blank hard drive
  http://www.mydigitallife.info/2009/10/27/clean-install-Windows-7-with-upgrade-media-and-product-key-on-formatted-or-empty-blank-hard-drive/

  -Activation of the phone it takes-

  How to activate Windows 7 or Vista manually (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Update Service Pack 2 is not installed, now my computer will not boot

  Hello. I recently tried to install the service pack 2 update on my computer. It did not installed. My computer is slow, so I tried restarting. It came with the screen that shows the updates are being installed. I kept the computer until it stops. When I turned it back on it would go to this same screen but with a message saying that the service pack was not installed correctly and that the computer is reverting changes. It will turn on / off power permanently. In an attempt to fix it, I managed to get in the log on screen and put in my password, but the minute I hit enter my computer started and closed the loop on endless. Anyone know what I can do?

  http://support.Microsoft.com/kb/949358/en-AU

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  The above lists some options including restoration/repair of the etc system.

• I recently changed my ISP sky broadband and now my computer does not connect. Why is this?

  I tried all possible ways to connect this computer again to wide band wireless, but it does not connect. All other computers in the House connected without problem.

  Hi Joesafe,

  What exactly happens when you try to connect? You receive messages or error codes?

  You can read the article and try the steps to solve the problem:

  Windows wireless and wired network connection problems

  You can also get in touch with the broadband provider for help on the issue:

  http://helpforum.sky.com/

• Help please download computer of Kespersky Internet security 14, rebooted and it appeared, now my computer does not illuminate.

  Rebooted my laptop by following the instructions, then it started to happen when the laptop charged up.

  

  When he ran through all this you stop.  I turned it on and a message with some options, 1, run in safe mode, etc etc, or continue, (something like that) I chose continue it and safe mode options but both times the rest just blank screen (a cursor may have been left) but nothing happens.

  What I can do, I'm not the greatest with computers.

  Hello

  If you start from the DVD, it is to do a reinstall or a startup repair.

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  _______________________________________

  You do a repair from the desktop after you installation start and start Windows 7 running, not not booting from the DVD if Windows 7 does not start.

  :

  "How to do a repair installation to repair Windows 7"

  http://www.SevenForums.com/tutorials/3413-repair-install.html

  See you soon.

• Windows updates have been loaded last night no idea those who. Now my computer does not restart. I can't restart in safe mode. I can't reboot with the original disc from the manufacturer. I have Vista OS with a Dell laptop inspiron 1720.

  I have the page that says that Windows does not load the last time and you have the choice between about 4 ways to load. Not the work.
  I tried the dell disk and who does not. All this just goes back to safe mode page.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Consumer Security Support homepage
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Yes I installed service pack 3 on the computer and now my computer does not have a cdrom in the bios or were for this matter__

  Yes, when my computer is its service Pack 3 update, my computer did evidence the cdrom in the bios or had other

  Device Manager... can be empty after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices... After you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• CS4 install a new computer does not accept the included serial number Acrobat Pro

  I bought CS4 Design Standard through my University.  I used it for years, and I'm pretty happy with it, I don't want to pay for a newer version.

  Recently, I bought a new computer and went to reinstall it on the new computer.

  The installation went without problems

  Recovery of my series of Adobe has been frank.

  Amnesty International, PS and ID agreed the serial number without problem.

  Acrobat Pro says that serial number is invalid.

  I spent two hours on the cat and in the end he said that the relief phase was not available for CS4, but was only available via online forums.

  So I initially posted the Acrobat Forum 3 days ago, and while my post has dozens of viewers it has none.

  How do I get this resolved?

  I don't think charitable thoughts on Adobe right now.

  http://forums.Adobe.com/message/6054756#6054756

  System,

  I finally (after 5 attempts) through the swamp on the other side.

  Here's what I did...

  1 uninstalled all of the CS4 program.

  2. manually deleted the folder under Program Files Adobe

  3. Ran the CleanCS4 program, who told me that I had to run microsoft windows install clean up utility

  4. has opened a new Director on my office profile

  5 install CS4 here

  6 open photoshop

  7 open acrobat.

  (I think that's everything now works).

  g'luck!