Windows updates have been loaded last night no idea those who. Now my computer does not restart. I can't restart in safe mode. I can't reboot with the original disc from the manufacturer. I have Vista OS with a Dell laptop inspiron 1720.

I have the page that says that Windows does not load the last time and you have the choice between about 4 ways to load. Not the work.
I tried the dell disk and who does not. All this just goes back to safe mode page.

Advertisement

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

Consumer Security Support homepage
https://consumersecuritysupport.Microsoft.com/

For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

For enterprise customers, support for security updates is available through your usual support contacts.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • After you have installed SP3 (on XP with SP2), the PC does not restart in normal mode, only in safe mode

    After you install SP3, PC does not restart in normal mode, only in safe mode, without giving a clear indication of what is the problem or how to fix it - other than say to check settings in the Panel (not very useful).

    PC is a Compaq Presario desktop with AMD processor, model #: SR1720AN product #: EL540AA-ABG

    I reinstalled the operating system recovery disks, which reformats HD and installed XP with SP2.

    I then installed the SP3 from a flashdrive (361 MB files). Everything went without hiccups, but final restarts, he won't get to normal mode, safe mode only.

    I did it twice.

    Any ideas? Thank you.

    Here are the specifications of your desktop Compaq Presario SR1720AN. According to the specification, this model comes with a processor AMD and Windows XP Home Edition SP2 installed at the factory. According to your description, it seems that the HP recovery discs may have been poorly photographed for an AMD-based computer. Please see this Microsoft article and this HP document about your problem.

    To solve your problem, please reinstall Windows XP SP2 by booting from your HP recovery disks. After Windows XP SP2 is complete restored and that your computer is operational, download the "Windows XP SP3 with AMD CPU upgrade utility." Run this utility, and then restart your computer. Then download the "Windows XP Service Pack 3 Package of Network Installation" for it professionals. You can also try to use the SP3 Installer on your USB. Install the update to Windows XP SP3 and then restart when you are prompted to.

    This solve your problem?

    Please send BRAVO

  • I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

    Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    Hello
     
    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • Windows does not start. I tried 'start normally', 'Safe Mode' 'last good known... ". "'Safe mode with command prompt. No work.

    Problem detected and windows has been stopped...

    PAGE_FAULT_IN_NONPAGE_AREA

    Technical information:

    STOP: 0 X 00000050 (0X8DF1BA4C, 0X00000000, 0X805E9A54, 0X00000000

    I have not installed new hardware or software in the last 3 weeks. This failure to start the problem started this morning. Computer was working fine last night.

    I have the same problem, a slightly different number.

    Stop: 0 x 00000050 (0xAC58B3AB, 0 x 0, 00000000 00000001, 0x805A3E33)

    While trying to delete some KB as recommended Moreover here I also received:

    SPCMDCON.sys - address F737D52E base at F737B000, time stamp 3d6dd67c, FWIW.

    As I understand it a error 0 x 00000050 may be an error of memory, and I remembered a couple of old computers in the basement, I'll try a swap memory.

    The system is a Dell Inspiron E1505, Windows XP Home Edition

  • Yes I installed service pack 3 on the computer and now my computer does not have a cdrom in the bios or were for this matter__

    Yes, when my computer is its service Pack 3 update, my computer did evidence the cdrom in the bios or had other

    Device Manager... can be empty after you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/953791

    Device Manager may not show all devices... After you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/953979

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • NET Accounts, locking threshold does not change. Can anyone confirm if the Net Accounts command has been depreciated?

    I have recently updated our default domain password policy.  After that I updated the threshold of locking to 7 I ran the following command in PowerShell:

    Get-ADDefaultDomainPasswordPolicy

    This shows that the policy has been updated to reflect the change I made.  However, when I run the following:

    NET Accounts

    The threshold of locking does not show change.

    Can anyone confirm if the Net Accounts command has been depreciated?

    Thank you

    Emmanuella

    CrystalBall © SEZ...

    It is a forum for specific consumers. You will find appropriate support for Windows 7 in these forums of Pro-specifique to IT: https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  • computer does not restart: it remains to press any key boot from CD

    I'm having a similar problem as a posted last year, but I was wondering if there is a way to restart without the re-boot CD. don't really want to lose everything, but I have other options.  He has just arrested and handed over on me the other night and now when it opens I get the F2 or F10 but the bootable hard disk doesn't seem to work: it remains stuck on checking DMI Pool data, otherwise, it opens only with the list of PCI devices and downstairs, it says boot from CD.  Any help, ideas or suggestions would be greatly appreciated!

    Hello

    Put the hard drive first in the boot sequence. I recommend you contact the manufacturer of the computer.

    Warning of the BIOS:
    BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    I hope this helps.

  • Windows deleted files to space, now my computer does not start except in safe mode. Any ideas?

    I got a message pop up saying I've been low on free space, I select the files to delete the computer option. He ran through the process and deleted files. I shut down the computer and have not used for a few days.

    I tried to connect this morning it took forever to get to the password page, when I chose my name once again it took forever to load the password box. He then told the welcome as usual, but for several minutes and then the screen turns off, I left for almost an hour and nothing. I removed the battery and connected in safe mode that began end.

    My system using windows Vista. I'm not good with computers so all ideas/help would be great.

    Hello CarrieWilliams,

    Thanks for your post.  Try a Startup Repair before leaving for the new facility.  Let us know the results, we look forward to hearing back on your part.

    See you soon

  • Computer does not restart after the update

    Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707.

    I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.

    If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, choose start windows normally. »

    Start the reboot system (recommended)
    Start Normal Windows

    No matter which option I choose, the system attempts to restart and takes me right back to this screen above information.

    No other changes have been made to the other than the update.

    Please let me know how to proceed.
    Operating system: Windows Vista

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not resolve the problem:

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Failed Windows 7 upgrade - now my computer does not start - what do I do?

    I tried to upgrade to Windows Vista 64 for Windows 7 64.  During installation to 75% of the last step, the computer "hung up" for hours.  I abandoned the installation to fail.  Have no idea why it does not have since I ran the compatibility test, deleted all the programs of conficting, anti-virus, etc.

    Now, I can't get the computer to boot.  I tried to go the last good start with Vista 64 and the operation failed.  I also tried a variety of corrections that are posted on several forums.  All I can get is a continuous loop of the attempts to start (for example. Windows - Vista - HP diagnoistics of screen - screen black screen prompts - and then he repeats)

    Without success, I tried to do a system restore - which also failed.  Any suggestions on how I can recover the system and try the upgrade again?

    Clean install Windows 7 with upgrade media
    http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp

    Clean install Windows 7 with upgrade media and the product key on formatted or empty blank hard drive
    http://www.mydigitallife.info/2009/10/27/clean-install-Windows-7-with-upgrade-media-and-product-key-on-formatted-or-empty-blank-hard-drive/

    -Activation of the phone it takes-

    How to activate Windows 7 or Vista manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    J W Stuart: http://www.pagestart.com

  • Windows does not start. Cycles to start in safe mode page, will then try to restart on its own

    Windows XP tries to start to the top of butends to the page of type BACK questions on starting in safe mode, safe mode with command prompt, or start with the last successful boot parameters.  We cannot arrows upward or downward scrolling.  Attempts of the computer to boot itself every 30 seconds repeat the same cycle that ends again at the option of safe mode page.  I left the computer on during the night and he did this recycling all the night evry 30 seconds never really start Windows.  I shut down the computer and then reboot tapping F8 all the time or something to take advantage of some control and reset?  Thank you for your help.  Dave

    Hi Dave,.

    ·         You did changes to the computer before the show?

    Try the following.

    Method 1: Shut down the computer, remove non-essential external devices and restart the computer. Check to see if it boots fine.

    Method 2:

    Step 1: Try to start in last good known Configuration and see if you can start very well.

    How to start your computer by using last good known Windows XP Configuration

    Step 2: Start the computer in safe mode and check the number. Report of the results.

  • had dsl fixed today, but my outlook express password does not work, how can I reset with a new password

    had dsl fixed today, but my outlook express password does not work. How can I reset or start over with a new password

    You must use the same password that you would use if you have access to your messages via the Webmail of your server site. You will need to reset it with them.

  • "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

    I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

    Yes, you can try to replace localspl.dll winprint.dll

    Create a restore point from the system beforehand and restart the computer later.

  • Curve of soaked blackBerry Smartphones and does not work - what can I do with it now?

    I went swimming with my curve in my pocket, and naturally, he is now dead.  What can I do with it? send somewhere for refurb? and no, I didn't have insurance, so please don't rub it!

    had the same problem.  people buy it online because they fix them however setting it will cost a lot.  I sold mine on ebay and got 160 for it and put it toward a new phone.

Maybe you are looking for