Ive completely lost my DVD using xp

Similar Questions

• I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore...

  Windows Vista 64-bit
  I had to do a full (out of the box) system restore. Before that, I did a complete backup of dvd by using Windows backup center and restore. I'm now trying to restore my files however, I get an error message that says the missing user account... "files that you are restoring have security permissions to a user account that is not found on this computer. The missing account is shown below... Dad-PC\ADMIN."the problem is, that a user account name cannot contain the"------"what to do? Thanks in advance!

  Hello

  at the end of my 1st response is a link to the appropriate forum for these questions

  If you have problems, it's in here is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Ive Osx 10.9.3 using Safari 7.0.4 and try all the remedies (allow you to uninstall old adobe plug-ins etc.) I still get an error notice can't complete installation. ? What next pleaset

  Try this installer: http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx.dm g

• I lost my DVD backup of Windows vista, can I download it?

  I lost my DVD of windows vista backup, and I need. Can I use the product key to download? and whence?
  Thank you

  Hello

  There is no Windows Vista downloads available from Microsoft.

  Here are the different ways to reinstall Vista.

  Contact your computer manufacturer and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And there may be a recovery disk to reinstall Partition Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup.

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Completely lost and confused about this thing of VM...

  Hello... I'm eager to try this thing any virtual machine so that I can try windows 10. I can't just update windows 10 because I use my laptop for school and there are too many conflicts, glitches, or whatever you want to call them between the programs that I use for school and windows 10. in any case and through my school I have access to the Dreamspark site and downloads (if you are not familiar with what is, I think that its really irrelevant necessarily anyway). Well, I burned the iso image to a disc and I have a folder of virtual disk on my computer so I think that means that I have downloaded the program, but when I open it and try to run it it always says that to restart or insert media that tells it where boot them from. so I try to run the components of integration of the iso image and he tells me the same thing. I am completely lost and totally frustrated and hope that someone can better explain the proper procedure, I should take to do this "thing"!  the operating system running on my laptop at the start is Windows 7 Professional 64-bit. Don't know what other info would be relevant, so if I left out anything important, just ask and I will specify.  Thanks in advanced for any help.

  I'm not familiar with the Microsoft Dreamspark program, but install Windows 10 on a Virtual Machine on a host Windows 7 is pretty simple using VirtualBox, a free application.

  The following link can walk you through it step by step:

  http://www.groovypost.com/HOWTO/Windows-10-install-VirtualBox/

• Lost original DVD for CS6. How can I get a replacement?

  Lost original DVD for CS6. How can I get a replacement?

  You can dl the installation files and burn your own cd.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | Suite X | 9,8 | 9 standard
  • Premiere Elements: 14, 13, 12, 11, 10: 9, 8, 7
  • Photoshop Elements: 10, 12, 14, 11, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Where bookmarks are located so I can backup a dvd using burn now?

  I can't save my Firefox Favorites to the dvd. I've been back up Favorites (XP), but I just noticed that the bookmarks in that folder are not my current Firefox bookmarks that are displayed on the bookmarks Firefox "drop-down." Where are bookmarks to see them and burn them on dvd using Ulead burn now? I followed the path C: > docs and settings > username > application data > Mozilla but I couldn't find all the bookmarks in a folder in the folder of Mozilla. I wouldn't be able to see these bookmarks in a folder? Thank you for your time and your consideration. A.C.

  You can create a backup of the bookmarks HTML.

  • Bookmarks > show all bookmarks > import and backup > export bookmarks as HTML
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  Such a file can be opened in Firefox and is not difficult to interpret in a text editor (an HTML editor should do a better job).

• Satellite A100-785 - I lost my DVD with Windows

  Hello.

  I have a big problem.

  I have to re - install my operating system, but I lost recovery DVDs.

  How can I get this plate or with windows form Toshiba .iso file?

  (Sorry for my English, I'm Polish and I don't have a good English ^^)

  Hello

  You can not download the file from Toshiba.
  You have to buy the recovery disk.

  Check out this page of Toshiba Recovery:
  https://backupmedia.Toshiba.EU/landing.aspx

  Here, you can try to order a recovery disc.

  Welcome them

• can I burn a dvd using quicktime 7 pro?

  can I burn a dvd using quicktime 7 pro?

  N °

  (137641)

• Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

  I use Money version 1105, 2004 updated.  I have 2 qusstions-

  1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

  2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

  Any help would be great, thanks in advance

  Eric

  For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

  Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

  Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

  Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

  Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

• I have Windows XP and I tried to play a dvd using it and it says I need a compatible dvd decoder installed. Where can I find a compatible decoder for the dvd for windows player?

  When I try to open and play a dvd using WMplayer I get a message that I must have a compatible dvd decoder to read the dvd that I want to watch.   Can you tell me where I can get it.  I only want to look not to burn.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Now, you must follow the link provided below and check if the problem is resolved by purchasing a DVD Decoder Pack add-on.

  http://www.Microsoft.com/windowsxp/using/Setup/expert/bridgman02april15.mspx

  There are now available at the following link DVD decoders:

  Info about DVD decoders:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Note: Note before you perform the steps above, you must create a restore point on your computer and check for the problem that you encounter on your computer to do that you must follow the steps below.

  1. open the control panel (all items view).

  (A) click on the system icon.

  (B) proceed to step 3.

  or

  2. open the Start Menu.

  (A) right click on the computer button and click Properties.

  3. click on the System Protection link.

  4. close the system window.

  5. check to make sure you have System Protection turned on for the list available on the disc, that you want to create a restore point, to include in the restore point.

  6. click the Create button

  7. enter a description to point restoration in order to recognize it when you do a system restore and click on the button create.

  8. you will now see this as the restore point is being created.

  9. when the restore point is finished being created, click on the close button.

  10. click on OK.

  If you still experience the problem, you must contact the support Windows XP Forum for this you must follow the link below.

  http://answers.Microsoft.com/en-us/Windows/ee514983.aspx

  Thank you, and in what concerns:

  Aito - Microsoft technical support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I lost my dvd for win 7 home basic oa what I do

  I lost my dvd for win 7 home basic oa what I need to do? How do I format my laptop is there a link? years of pl

  See if this post on the forum helps: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/when-can-i-download-the-windows-7-home-basic-iso/39eac399-3a12-46ed-91f4-93a300126e43

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  J W Stuart: http://www.pagestart.com

• COPY A DVD USING WINDOWS 7

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  ==================================
  If you have the full version of Roxio I guess
  It has an option to copy a non-commercial DVD.
  If it's not... see the following information:

  The following freeware can create an ISO Image
  that allows to burn copies.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (During the installation there will be an option to install
  the "Ask Toolbar"... you can uncheck only)

  The following tutorials may be worth a visit:
  (basically you use ImgBurn to create an ISO Image...
  then you use ImgBurn to burn the ISO Image on a
  new blank DVD)

  Check out the following tutorials...

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• can't burn a dvd using windows dvd creation

  When you try to burn a dvd using windows dvd creation I get this error message, "Cannot create the dvd - the owner SID on a per user subscription does not exist" I used to beable to burn DVDs with no problems, what it means and how can I solve this problem?

  Hi TheSic1,

  Let us try to uninstall codecs of programs and features that may help you resolve the issue.
  (Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can try to uninstall third-party CD/DVD burning software and see if the problem is resolved.

  You can check the link below.
  http://social.msdn.Microsoft.com/forums/en/windowsgeneraldevelopmentissues/thread/7b16ae26-8cc7-4b67-9fe4-85bff958f845

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP