J3680 all-in-One: get alignment messages

Similar Questions

• My HP Officejet J3680 all-in-One printer prints sometimes and then stops.

  original title: my HP Officejet J3680 all-in-One printer prints sometimes and then stops.  What should I do?

  My printer was out of paper before I have had already sent a message to print.  Bllinked, meaning light that he was in the paper.  However, when I added the paper it has stopped printing all together.  This has happened on various acassions.  My printer, HP Officejet J3680 all-in-One, has only six months.  In addition, it only prints a copy at once, although I ask several copies.  What should I do?

  You can see in the Forum of Support HP

  HP printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

  Also have a look at these tutorials:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

• Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

  Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

• HP Officejet j3680 All In One will not print

  Does not print my desktop Hp Printer j3680 all in one! Help?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  ·                         ________________________________________________________________

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·                         ________________________________________________________________

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Officejet 5610 all-in-One: cartridge Error message:-see the documentation for the device to solve the problem

  I used Cartriege world genuing HP ink cartridges refills for the past 3 years.  These cartridges are about 3 months charging sine and worked very well.  I just print a page and then got the above message for the first time.  Any help?

  Thank you

  lurcher1

  Hello @lurcher1,

  Thank you for visiting the Forums from the HP Support! I see you are using cartridges refilled with your HP Officejet 5610. You have always used refilled cartridges, but now you've found a cartridge error.

  I would like you to start troubleshooting here: 'incorrect print cartridge' or 'Print Cartridge problem' message on the Panel of printer for HP Officejet 5600 all-in - One Printer Series

  You will notice Solution: use genuine HP cartridges :

  'HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridges HP cartridges refilled HP. If you use genuine HP, the following cartridges no could not solve your problem of print quality. »

  To get a better understanding to take a look at the documents below:

  Can I recharge the ink in my HP ink cartridge?

  &

  HP vs reloaded cartridges inkjet print cartridges

  I hope this helps, if you still get the error message after replacing authentic ink cartridges, I suggest you contact our technical support at http://support.hp.com/us-en/contact-hp. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  This is a great question other clients may also wonder; Please click the "accept as Solution" if you think that this message has helped you, or could help others. You can say thank you easily by clicking on the ' Thumbs Up ' below!

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• DeskJet 2542 all-in-one: parse error message prints well

  I kept getting this error trying to scan a document for the first time.

  "An error occurred all in communicating with the device. Please check that the device is correctly connected and powered. »

  To make sure that the printer is connected I printed a pdf on file on the computer and managed.

  I installed from the given CD and I intalled software on the HP site that grew to my specific operating system OS X 10.9.  I checked my firewall and allowed him to be opened for printer sharing.  I restarted my modem wifi network, I restarted the computer, and I restarted the printer.  I have reset my printers and reselected this printer... which is the only printer that was available for selection.  The computer recognizes the printer completely, however it just keeps giving me the message quoted above for scanning.

  Help, please.

  Hello @Elochin and welcome to the Forums of HP!

  I understand that you are having problems of scanning.  I would like to help!

  You have problems, make a copy?

  I have a few steps, I recommend you:

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 2540-All - in - One Printer full feature software and drivers series.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet 6300 all-in-One, the error message which is print cartridge is open

  I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

  I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me

• photosmart HP 6520e all in one scanner error message component is broken

  When I try to scan on my hp photosmart 6520e all-in-one printer I get the message scanner problem scanner of the following component is broken cannot copy or scan

  Hello cm16.

  Welcome to the HP Forums!

  I understand that you receive a message indicating "Problem of Scanner," unable to copy or scan using the Photosmart 6520. I will do my best to help you! I recommend you plug this printer into a live wall, not a surge protector. I just want to see if that makes a difference.

  I would try to do a hard reset on your printer. Leave the printer turned on > unplug the power cord at the back of the printer for more than 60 seconds.

  If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP. Good luck.

• I have two HP printers and all often, I get a message that there is no printer

  Original title: from time to time, I get a message that there is no installed printer. I have two printers. I have to turn off everthing and restart the computer. Printers appear in the control panel

  Printers are both HP

  C7280

  F4180

  Hi June, Col.

  1. When did you start to question?

  2. you remember to make changes to the computer recently?

  Method 1:

  Try the Fixit printer mentioned in the link below and check out them.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Also try to uninstall the printer and try to install one at a time and check.

  You can uninstall all the printer drivers, programs and features as well as Device Manager.

  Method 2:

  Step 1:

  Uninstall the drivers from programs and features.

  a. Click Start.

  b. type appwiz.cpl in search, and then press ENTER.

  c. find the printer driver packages, right click and uninstall both packages.

  Step 2:

  Then uninstall the printer since also Device Manager drivers.

  a. click on start

  b. type devmgmt.msc in search

  NOTE: Click on view the hidden devices on the view menu in device managers before you can see devices that are not connected to the computer.

  c. you find devices to printers, right-click on it and select the option uninstall

  After the uninstall, try to install one printer and check if it works. If it works, then try it with the other and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PSC 1610 all-in-one several error messages

  Hi and thank you for providing this service.  I have a PSC 1610 all-in-one, bought in August 2005 which is used with a Compaq Presario Windows XP (they were purchased as a Pack).  I started to receive error messages, more which start with 0 x, I have determined is an ink system failure.  Sometimes the messages sometimes say 'failed to initialize' or 'hw_interrupt '. At this point, I can use the power button on the 1610 and it restarts, sometimes producing a print.  Other times he repeats just with a different error message.

  I've uninstalled and reinstalled the software from the original CD, and also did the instructions on here regarding unplug USB cable, power unit, waiting, etc.  but unfortunately, I'm still having the same problems.

  I guess my questions are 1) is there anything else I can try to solve the problem and get back to happily print my genealgical research and/or 2) because the machine obviously lack of professional maintenance and it's so old, I would be better off just buying a new all-in-one?  (New Anthing I would buy would have both with this older Presario and a laptop HP 3 year running Windows Vista).

  HI -.

  I'm guessing you've already gone through the steps described in this document?  If so, on the only option I know is him having served.  In answer to your other question, with the price of all-in-one now, it is probably a better option to just buy a new one.  You can find the plug on current on this site printers.  You can do some comparisons between several printers to see what OSs are supported.  Wish I had better news.

  Hope that helps.

• my cd is not recognized at all. I get no message of the sytem when I insert the cd in the drive

  My Cd is not recognized by the system.  I don't get any message of Windows7, asking me what I want to do.  I ' v tried to burn music to a cd in my Media Player, but the cd is just sitting there and nothing happens.  The last time that I used it with success was on 04/07/12.  When I went to burn a document on a cd a few days ago, I discovered the problem.  May we make a suggestion (in plain English, please).  I am new to all this and I don't understand all the technical terms.

  Thank you

  CD are not recognized

  This is the fourth time I've asked this question without result.  I am trying to burn a document on disk, but the system will not recognize the cd in the drive.  I tried troubleshooting offered through Windows, I've linked the diagnoses by HP and I have tried several different physical disks.  Yesterday I finally got a message through the Windows troubleshooting and diagnosis saying the disc is unreadable.  I tried two packets together new Maxell disks and I have a problem, believing that they are all bad.  Can someone help me, in English please. I; m not much of a technical person and do not include all the terms.
   
  Thank you

  Hi William,.

  What is the brand and model of your computer?

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: Run the following Microsoft Fix it

  Your CD or DVD drive cannot read or write media:
  

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  
  

  Method 3: Refer to the suggestions from this link.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps!

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• Photosmart C6380 all-in-One - printer error message question

  I have a HP Photosmart C6380 all-in-One printer.  It worked well for a number of years, but last year, whenever I want to print something, the orange light blinks and an error message is displayed in the window.  It is said: ' Please Oxc19a0035 turn printer off, then on.  If - before the printer print, I must turn off first and then on again.  It's more boring, to say the least.  Does anyone have a suggestion as to how I can solve this problem?  Thank you, Ms. Dahlia

  The troubleshooting steps described in this document may help to resolve the error.

• Why can't I access my CC of libraries in all applications? Get the message ' something going wrong initialization Cloud creatives library "any help greatly appreciated.

  Why can't I access my CC of libraries in all applications? Get message "something went wrong initialization library creative cloud" any help greatly appreciated.

  Hi Paul,.

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena