J4680 printer, paper won't status bar.

Similar Questions

• Photosmart Premium C310a: Photosmart Premium C310a does not detect photo paper in the status bar

  Prints on plain paper e.g. A4, but does not recognize the 6 x 4 photo paper in the tray above, asks me to load paper in the tray.

  Hi @Ebeniste1uk,

  Welcome to the HP Forums!

  I understand that your HP Photosmart Premium c310a does not detect your photo on Mac OS X 10.10 tray. I am pleased to see that for you!

  I would recommend going through this guide, the printer is not Pick Up paper from the Photo Trayand watch this video:

• are you able to send documents to print the UH high status bar

  I expect to be able to configure printing documents of two flow tray manual and the feed tray top, so that I could use a tray plainpaperin and letterhead in the other.  Is thi possible, and if so how I created to do this?

  Hello

  The upper tray is a feeder for the scanner, for copy and fax an original, it is not intended for printing and cannot be used for such.

  Shlomi

• Photosmart D7260 won't print magenta, though the status says ok

  Dark magenta has more ink, replaced the cartridge status shows 100% and click ok, but do not print magenta color, test page does not print light or dark magenta bars have performed maintenance cleaning printhead several times, still does not

  Solution - I found the image more red, I had (wrapped Christmas gifts) clouded the Red a lot, then printed on a dozen pictures for magenta flowing.  It seems to have worked. Apparently, there was a clog or the dried ink from the printer where I didn't replace the magenta cartridge empty for so long. Good luck with yours.

• The paper on the set of source has been disconnected. How to reconnect to the status bar?

  Model HP OfficeJet J6480

  The paper side left, on paper source tray, broke up the status bar when I moved it to the right to accommodate a stack of small greeting cards. How the guide is reconnected to the status bar?

  Thank you... I thought about it I just before your answer!

• for printer status bar says new cartridges; BUT they are both new

  How can I solve this: status bar shows new cartridges; BUT they are both new. Only 3 years of the printer.

  * original title - my printer KodakESP3 AIO status bar her, Hey you TWO nine. BUT, th outys cartridges bot *.

  Hello

  wrong forum for your question

  It comes to the installation of vista operating system instance

  Try this:

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  or try the support of Kodak

  http://support.kodak.com/app/intfSel/intf_redirect/L2FwcC9ob21lL29yaWdfaW50Zi9rb2Rha19iMmNfZW4=

  or the Hardware Forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

• HP Photosmart 2575 all-in-one will not recognize that the book is in the status bar

  What can I do to fix this? When I try to print, I get an error message saying paper not in the status bar, but the paper tray.

  Hi vlayerout450

   

  1. What is the exact error message you get?
  2. during how long have you had this problem?
  3. did you of recent changes on the computer or the printer?

  
  I suggest to refer to the link below and check if you have all the latest updates installed for the printer. You can also use the print diagnostic utility and check if it lists any problems-

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=&sw_lang=&product=441240#N270

  
  You can also check if the reinstall the drivers help you. If the problem persists I suggest you to contact HP support for help and check.

   

  I hope this helps.

• I don't see the status bar at the bottom of the screen. How can I get that back?

  Something has changed. The status bar disappeared. The only way I seem to be able to leave Firefox is to close.

  First of all, you can check that Firefox is not in his view full screen where the Windows task bar is hidden. The F11 key toggles between the normal modes and full screen.

  If Firefox hides the taskbar of Windows in normal mode, a file that stores the dimensions of Windows Firefox may be damaged. If you are not able to resize the window manually, you can delete this file for Firefox back to its original size.

  To try to manually resize:

  Press Alt + space to display the system menu of the Firefox window, and then click the size (or press S) and press the arrow down once, then the arrow upwards once. This will usually move the bottom of the Firefox window to the visible area of the screen. If it is not visible, try pressing the arrow upwards several times, or for a while. To complete the editing of size, press ENTER.

  If the window is maximized, then size is grayed out. This is normal, and this method won't help.

  To delete the settings file:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  You can activate missing bars (menus, toolbar bookmarks bar) using the list on the toolbar, which you can view by using one of the following:

  • Right-click on a zone empty of the tab bar, or click the "+" button on the tab bar
  • Press the Alt key to activate the classic menu bar, and then view > toolbars
  • on the Customize tab, use the button "show/hide Toolbar" (controls, buttons, and Toolbars Customize Firefox)

  Any improvement?

• Any chance you get the status bar?

  Any chance can get you the status bar, because all updates FF28 past do not have the status bar which is where most of my favorite Addons are located (for example, eQuake Alert and ForecastFox. It's really annoying. I had to disable the automatic updates because of that and stay with FF28. I'm sure someday FF28 will become obsolete and then I won't be able to use my Addons.

  "No matter how lucky can get you the status bar?"

  Little or no chance to happen. As you very well know, there are one or more extensions to restore the bar of the add-on for Firefox 29 + versions.

• CD in the status bar is not recognized - why?

  Hello

  Sometimes, my Mac Pro won't recognize a CD loading.   It is very intermittent.  When this happens, the drive icon does not appear on the desktop and the status bar does not eject with any normal methods.   In addition to the CD does not appear in the disk utility, and frequently disk utility does not open.

  Based on other posts, this seems to be an unusual problem.  I've seen a lot of posts on how to get the tray open.

  What I've not seen, that is WHY this problem occurs and that will set to put in place to prevent it from happening again.

  Any help in identifying a cure is greatly appreciated.

  Don't know... all I can do is to suggest a few things and hope that works... Try first, is a cleaning disc with brushes integrated in the drive or a good breath of air. If you have a Mac Pro Tower, you can remove the optical drive and open it, the laser inside lens may be dirty, if it does not, a Q-Tip and windex could. I don't know how old is your drive, but if it is one of the original Optiarc ones, they do and can go wrong sometimes, but are easy to replace. According to the age/model of your Mac pro, you can use virtually any SATA optical drive or a SATA optical drive with an ATAPI/IDE bridge Board connected to the rear. Make sure the jumpers on the back (if there are any) are set to CSEL, expected your drive must be replaced, too, zap the pram (well, it's worth a try, anyway) I... .is the commercial cd or it is home made?

  Let us know how that turns out

  Good luck

  John B

• My office jet 2050 advance printing paper

  paper won't advance one sheet at a time to print on.

  Hello @airlinelady,

  I would like to work with you today to solve the problems of the paper that you are experiencing with your HP Deskjet 2050 all-in-One Printer. In order for me to provide you with troubleshooting steps specific I have a few questions for you.

  1. what operating system is on your computer?

  What is my OS?

  2. are you any error paper jam or any other mistake on the computer?

  3. is there the blinking lights on the printer?

  4. do your product are trying to print, but the rollers fail to grasp the paper?

  In the meantime, I'll provide you with some steps to follow through to see if that solves the problems of generic paper paper feeding.

  "Out of paper" Error Message and the printer is not looking upwards or the paper feed

  Please reply to this message with the result of your step by step troubleshooting after crossing the paper flow to the troubleshooting steps. Also, if you be persist questions remember to respond with answers to my questions above. Thank you for joining the Forums of HP Support! Good luck!

• PCL Code for the selection of the status bar

  We have a Unix-based program that relies on EZ for the selection of the printer spooler. Printing was allowed until we replaced the old printer with a HP 3005dn. We must make letterhead in tray 3. EZ print spooler requires to print PCL codes. I ran the code numbers range to print from the 3rd drawer.

  My problem is when it receives the print job, you have to hit the OK button twice so he can shoot from the 3rd drawer.

  By changing the PCL code, I can get him out tray 2 automatically, or stops for tray 3.

  I have modifed the installation of manual feeding system and or use requested tray do not help both.

  Here's the line of code in order

  PCLx_lowreceipt_ac_begin_ ^ [& l0o66f4H ^ [& s1C ^ [(s4099t0p12H_]]

  4 H is supposed to designate the selection of the status bar. I spent several hours from 1: 00 until 8: 00 successfully and to have the work automatically pull from tray 3.

  any ideas?

  Solution

  You need to access from the UI and not the control panel

  -IP in the laserprinter

  -Tab settings select

  -Set the camera (left side)

  -Develop "Configure Device" in the center of the page

  -Develop "Impression".

  -Develop 'PCL '.

  -at the bottom, "Mapping of media sources"... assign the Standard classic.

  Worked!

• Re: rotate the image of status bar on timer

  Hello

  I'm trying to turn the bitmapfield in my status bar on every 3 seconds. I know Don is involved in some way, but he can't know. Here's what I have so far. Any help would be appreciated!

  new Thread(){
                public void run(){
                    try {
                          timer = new Timer();
                          timer.scheduleAtFixedRate(new ImageTask(), 0, 5000);
                      } catch (Exception e) {
                          // do nothing
                      }
                }
              }.start();
  

      private class ImageTask extends TimerTask {
          public void run() {
              System.out.println("Test Printing..");
              setStatus(adField2);
          }
      }
  

  I found it... I use this code:

  final t of Timer = new Timer();
  TimerTask tt = new TimerTask() {}
  public void run() {}
  If (ad_time % 3 == 0)
  adField.setBitmap (CreativeCore.ad2);
  If (ad_time % 3 == 1)
  adField.setBitmap (CreativeCore.ad3);
  If (ad_time % 3 == 2)
  adField.setBitmap (CreativeCore.ad);
                     
  ad_time ++;
  Invalidate();
  }
  };

  t.scheduleAtFixedRate (tt, 1000, 3000);

• Disappears from the status bar

  When I'm away from mobile data my status bar disappears.

  What mobile data?

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• Is it possible to add a mute icon on the status bar

  I understand the desire to keep the clean status bar, but a mute icon would be really useful for many users. This is my first iPhone and I had a LIFEPROOF case to protect it. The problem is that this case does not allow me to determine the setting of the switch ring looking from the side of the phone. The only way that I can know if the ringer is on is to flip the switch back and forth while watching the status of ringtone icon screen.

  Yyou possibly tell there is a problem with the case, but I bet it's true for most cases, in particular the raincoat water ones.  If Apple does not support to add even an icon to the status bar at least Apple could put on display today ' hui / Notifications of menu drop-down.

  You can provide feedback to Apple here, http://www.apple.com/feedback. This is a user to user support forum, and Apple is not here involved. It is the only way for them to know you want to see a change.