printing from back to front

Similar Questions

• Envoy 55300: How do I change print from the back to the front on my series printer sent

  I want to be able to print from front to back on the documents at the present time I am printing documents backwards

  Hello

  Please read @Sunshyn2005 of response on page #1 the following discussion:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/how-to-reverse-the-order-of-printing-on-envy-5530/TD-p/4143638

  I was had a craving 5530 during about 1 year (a printer ready) I couldn't work this. My new ready printer has this option.

  

  Kind regards.

• J6480 prints 'back to front' even if 'forward to the rear' is set as default

  My J6480 prints 'back to front' even if 'forward to the rear' is defined as a default value in the "printer settings" and "printing preferences".

  Suggestions?

  Hello

  You can try to disable the advanced default printer printing functionality
  * right click on the default printer that is your officejet j6400 series in printers and faxes (xp) or printers (vista) in the Control Panel window
  * Select Properties
  * Select the Advanced tab
  * removed check mark next to the advanced printing feature activate
  * hit apply, then press ok.
  * Try printing again

  Let me know if it works...

• HP 8600 Pro: lines on paper printed from a copy

  I also have the mentioned lines previously, but with a slightly different twist. I can scan to a computer of the ADF or the drink with zero problems. When I COPY the glass and feel, it looks like I have the longitude on my copy. Fine, I can print. I can scan to a computer very well. I can't copy and print from the glass.

  I cleaned the scanner glass, I cleaned up the white plastic, I cleaned the short glass in front of the scanner glass. Variations null.

  If it's something that I need to replace I'm not sure it will be with a HP. This is my fourth all in one I have owned, and I did have problems with none so far. I am open to suggestions and if possible, an explanation of why I can scan to a computer out of the window, but when I copy the glass to print I get longitude. Yes, I scanned and printed with just a piece of plain white paper to make sure it wasn't some kind of copyright protection. I am at a loss for an explanation, but would like to hear the why of this...

  Hi @Photo8620,

  Welcome to the Forums of HP Support!

  I see that you are unable to copy from the glass of the scanner. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Usually, when you see this type of lines, it is caused by something on the glass a shadow. Because you do not get the lines during the scan from the scanner glass. I'm more inclined to assume that there is something else causing the problem. As the current or a firmware issue.

  Please confirm that you are able to scan using the scanner flat glass without producing lines.

  Follow the steps in this guide:

  • Vertical stripes, lines or streaks on Copies, faxes or scan

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  4. Try another outlet to current/piece.
  5. Try a different power cable.
  6. Try to copy a blank sheet of paper.
  7. What were the results?

  What operating system do you use?

  • Mac OS X: how to find which Mac OS X Version is on my computer?
  • Windows: How to find the Windows Edition and the Version on your computer.
  • Depending on the operating system you are using, click here to locate, download, and install the update of the firmware of the printer.

  If the problem persists and that lines when copying using the scanner flat glass. I have recommended to perform a reset complete semi. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• HP Officejet Pro 8600 N911a will not print from Windows 8.1

  I have a HP printer Officejet Pro 8600 N911a that returns the 72234 error code everytime I try to print a document from my Windows 8.1 desktop (HP 1520 t).

  Also, there is a single instance of error code 74899

  The same document prints fine on my Windows 7 Desktop and my Windows 7 Netbook.

  Firmware of the printer is: CLP1CN1416AR

  Firmware from the Support Page of the printer appears as: CLP1CN1322CR (2014-07-18)

  What should I do next to be able to print from my computer Windows 8.1.

  Steve

  Note: This is the first issue I had with this printer that was bought a year ago.

  Hello Steve, I hope you're well

  Thanks for getting back to me with your info!

  Yes, I would first of all, running the wizard of wireless configuration from the front panel of the printer (installation program, Menu, Assistant wireless network), make sure that the printer is connected to your network, then proceed to uninstall the printer, restart the PC and reinstall them both back on your computer.

  I hope that this is the solution!

  Have a great Monday!

• Why do my printer stop printing from my ipad?

  I was able to print from the Ipad there on my Officeject HP 6500 has more printer.  I usually print using a program on my Ipad called IAnnotate PDF.  I had to stop a print job and I turned the printer off and on again once again because I did not understand how to cancel the print job from the Ipad.  Even if the symbol (symbol lite blue) for the wireless is on I can't have a work print from my Ipad to the printer.  Can you help me with this problem.

  Information on my printer is Nr CN5588A, Option 1 H3, FPU no: {removed privacy} or other numbers that appear on the back of the printer-MAC {removed privacy}.  Thank you

  Hello nyiasgg,

  You can have a document stuck in the print cue of your iPad.  Press twice on the button on the front of your iPad, this should bring up a submenu that displays all the programs running on your iPad.  Find your print queue and cancel documents in queue.  You will need to cancel one at a time and you will want to have the printer off while you do this, as when the print job that blocks the rest is cancelled, all will start printing.  Once that all print jobs are cancelled, turn off the iPad all the way.  Do not only mode 'sleep', make sure that the iPad is turned off completely.  If you must remove the battery to make sure.  Re-turn on the iPad and the printer and try to print.

  If this does not work, make sure that the print job is canceled.  Turn off your router, iPad and your printer.  Turn on the router, but make sure that the stay of the iPad and the printer off.  Wait for the router to stabilize, 1-2 minutes at the most.  Re-turn on the iPad and the printer and try to print.

  If none of those working, let me know.

• Cannot print from the Surface

  Original title: printing from the Surface

  How can I get the Surface to be printed on a LaserJet 4MV printer connected to a home network? Apparently, I need to download the driver to the Surface,
  supposedly through Windows Update. But I get a message that Windows Update is not available and try to come back in a bit. It's been two weeks now. I think that's enough time.

  The selection of the pilot process is slightly different for RT

  Go to add printer, and then select the printer is not listed option and then click Next

  Click Add a local printer... and then create a new port.

  The next point depends on how the printer is actually connected

  SO directly to the local network, then choose TCP/IP and set up address.

  IF on a PC then choose Local Port and set the port name on \\PCNAME\PRINTERNAME

  In the installation of the printer driver, select HP, then on the right side that you have to jump in front of the largest part of the Laserjet section because they are PCL6 and the 4MV is PCL5. 3/4 of the way down are Cffp Laserjet class drivers, even more after Officejet are PCL3 class drivers. You have to experiment with one of them.

  RT in ARMS does not normally support installing x 86 programs. Use of RT v4 driver architecture whish is based more around to support groups of printers using the same file defined as specific drivers of each model. It can lead to minor features, not being is not visible, but it should still work as a printer.

  Neither my K8600 L7780 ot are still both work.

  LaserJet 4, best printer ever made!

  This process works for most of the printers 'unidentified', even if it depends on a little know the specifications of the printer. This question is coming repeatedly, and needs to be better documented.

• I can't print from my laptop or desktop

  I have original plugs so I can use my laptop away from my router. I thought that was the reason why the laptop suddenly had a fit irritate & stopped printing. Now I can't print from my office either. Firefox continues to send me apologetics messages saying he has embarrassed it does not work, but seems not to do something. I checked the configuration and everything seems fine.
  A clue may be that I get something about XPS documents whatever they are?

  Yes it of true - cut for at least a minute, then turn it back on. I get a very similar problem with mine, and reboot the router always does the trick, hope if it works for you.

• Unable to print from the web... allows to print from notepad or wordpad since

  Well Firefox using more than a year with a Lexmark printer. Switched to an Epson printer yesterday and used the Epson install disk by following the instructions. Tried to print 2 different elements of the internet tonight and got a msg that the printer cannot communicate with the PC. Called Epson which had me a test print om Notepad and print it out. Print very well. Epson said it isn't a problem with the printer, but rather a conflict with Internet Explorer (which I use is any more). Can advise you. The Epson has by default in my control panel and I unplugged then replugged my USB cable, the printer power cable and restarted my PC.

  Bob please remove your E-mail address, we spam bots that cruse forums, looking for things like that. Also what starts here ends here, if others have this issue and the answer is not here that it is not very useful.

   Removing printer:
  

  Disconnect the printer from your computer. Click 'Start' and open "devices and printers". Here, you will find your printer. Right-click on the icon and tell "remove hardware".
  When the printer is removed, restart Windows and make sure that the printer is not available.
  At this point, plug the printer back in and turn it on Win7 must track a driver to make it work. Remember that the word 'works' Win7 found a driver and installed, it does not mean that it is the biggest driver.

   Epson is one of the original designers of printers I would be shocked if they did not have the driver you need right on the Web. That being said, that is where Win7 would receive the driver. BUT Win7 is going to pull from a pool of drivers based on what they get back from pinging your printer, they will pull what is said to work by the printer builder, it would be up to the printer builder to keep the pool up to date.
  

   So once you are up and running you may want to go to Epson and search that out. The proper Epson driver may give you options Win7 won't know about.
  

• HP Deskjet 2510. Cannot print from PC.

  I have some - PDF995 - software on my PC that converts documents to PDF format.  It seems to interfere with the printing of documents for the screen, with my HP Deskjet 2510.  Whenever I try to print a document, after hitting the "print" key, the PDF995 software opens each time.  I have the HP printer as my default printer selected, and I also select him as the printer you want before you hit 'print '.  But the software PDF 995 maintains just opening.   Any ideas would be appreciated gratefully.   Thank you.

  Hi wilen,.

  Welcome to the Forums of HP Support! I see that you are using a free pdf converter software and it interferes with your HP Deskjet 2510 printer. When you try and print a document, even if your DJ 2510 is set as your default PDF995 software opens instead.

  After some research on the PDF995, I managed to download on my computer running Windows 7, download a file readme.html gave me. I noticed that it states the following:

  "Print a document from any application by choosing the PDF995 printer in the printer dialog box. Do NOT select "print to a file." You will be asked to enter the name of the PDF file you want to create. "

  It tell me that it will automatically set the PDF995 printer driver to the printer by default, after you have downloaded and installed, I go to my devices and printers the PDF995 has been set as the default printer. When I changed the default value for my HP printer you want, my pdf software arises as well. I made sure to hit them apply and save the changes. When I went to print it printed on the HP printer - I don't have the pop up.

  I know that you have already configured your printer by default for DJ 2510, but please try the following steps, listed here:

  1. go to your devices and printers

  2. right click on your DJ 2510, and then select set as default printer

  3 now, please do a restart of your computer

  4. Once your computer is back, please make sure the DJ 2510 is always defined as a default

  5. now move forward a document place desired that you want to print

  6. go in the file options and scrolling to print

  7. your printer dialog box opens, your DJ 2510 must always be on the defaultprinter

  8. click on print and the test document

  Were you able to print correctly without the pdf995 software arise? If this is not the case, continue below:

  Go ahead and run HP print and Scan Doctor- it has been designed to provide users troubleshooting by HP and features fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Also, I found when I used the software, I kept getting annoying pop ups, I have found this:

  "The free versions display a sponsor page in your web browser each time that you run the software. If you prefer not to see sponsor pages, you may upgrade by obtaining each of the keys

  Please take a look at the pdf995 frequently asked Questions: FAQ

  I hope this helps, please let me know the result if you use always problems, please leave the following information:

  1. What is your operating system?

  2. have you tried to use the command print-Ctrl + P? Do you have the same results?

  3. what browser are you using to print from, or what program?

  I'll watch for your reply.

  I found this information here: http://www.software995.com/

  Thank you

• HP Photosmart 7525: Unable to print from iPhone 5 since the evolution of routers

  iPhone 5

  Printer HP Photosmart 7525

  We bought a new router and when it was installed, I cannot print from my iPhone 5. My phone is set up on the new WiFi router. I guess the signal to the printer is going through the router. I don't really know.

  I need help to know how to enable printing from my iPhone.

  Hello

  AirPrint is based on Hello (multicast), which should be supported by your router.

  Some routers does not support such an and some may need to change the settings of the multicast router work.

  Please let me know your router brand and model to understant better capabilities.

  So, you can try the HP ePrint app and check if that can allow the addition of the printer by its IP address.

  Click on the plus sign while choosing a printer and type its IP address, which can be found by clicking Setup > network > network display the summary on the front of the printer:

  http://support.HP.com/us-en/document/c01616126

  Kind regards

  Shlomi

• New HP Photosmart 7520 won't print from the photo tray

  EDIT: He will feed from the phototray if I print the photo in Windows Photo Viewer.  However, he still refuses to print directly from the jpg format, even if I specify explicitly in all the settings I want to print a 4 x 6 from the photo tray.

  Is this a normal behavior?

  I guess it would print correctly from other photo editing and look at software, but haven't checked that yet is not sure.

  PREVIOUS POST:

  I just got this printer and cannot print from the photo tray.  He printed from the phototray during installation and configuration, but it was the only time.  The rest of the time, when I try to print a photo, it selects only in the regular paper tray.

  Is there a magical procedure involved?  I have an operating system of Windows 7 and just installed on the HP site.  I uninstalled and reinstalled, but it still does not work.

  I load a sheet in the phototray, make sure that the correct printer is defined, select the paper size (in this case 4x6in photo sample provided with the printer paper), select HP Everyday Photo Paper, glossy paper, click on print and the printer does not take into account the phototray and prints from the regular paper tray.

  I've scoured the web and answers do not solve the problem.  It's very frustrating.  If I can't get this resolved in a day or two, I will back this printer and will try another brand.

  

  

  These settings should always print to the Photo tray.

• Printing from iPhone

  When I first set up my HP 5510 he printed PC and iPhone. Now I find that I can't print from iPhone (4 s). Tried emailing photo to the printer, but it was rejected as spam. Any suggestions? I would use the print function of the iPhone more than on PC. Regular e-mail doesn't print or the other.
  
  Thank you.

  Hello Mimi_64,

  As for printing on the iPhone's on-board printing function, there are a few steps, you could try to see if they are able to solve your problem.

  1 clear print jobs from the print queue on your device iOS by tapping twice on the home button. The Print Center should appear at the bottom of the screen. Select Print Center and clear print jobs by sliding your finger across each task and select "delete" until no more jobs are listed.

  2. after clearing the print queue of the printer, you have to completely turn off your iPhone by pressing and now the power button on the top right of the camera until see you "Swipe to turn off" and slide on the screen to completely turn off the iPhone. Do not feed the iPhone on yet.

  3. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

  4. once the printer is back on, you can return - turn on the iPhone and try to send a picture or an email for printing test and see if this solves the problem.

  As for sending emails to print from your iPhone, please make sure that:

  (a) there is a single address in the ' to: ' field (printers email address)

  (b) remove any signature you defined to attach at the bottom of each email (for example, "sent from my iPhone")

  Now, you can try to send an email from your iPhone and see if it will print correctly and not responded with enamel "rejected as SPAM.

  If you have any other questions do not hesitate to reply to this message and I'll try to help you further.

• photosmart HP 6520 trying to print from the ipad, but it keeps telling me tray paper empty

  I try to print from my ipad and it still says that the paper tray is empy, when it is not.  I think he wants to "photo paper" and I don't want to print a photo.  ??

  HI Vicki_O,

  Welcome to the Forums of HP's Support. I understand that when I try to print from your iPad using Apple's AirPrint feature that you have found an error output of paper for the printer Photosmart 6520.

  I suspect that you are right and the AirPrint feature is that the document is printed as an image file, so it's like a photo manipulation. I have included document Basics AirPrint from Apple. For any additional consultation, I've also included HP How to use Apple AirPrint on a wireless network.

  If you want more that what is available with Apple's AirPrint printing options, you can use the application Mobile HP ePrint. I've included the HP ePrint Mobile App FAQ document.

  If you want to scan from your printer directly on your iPad, you can always download the AiO Printer Remote app from HP.   I've included the HP all-in-One Printer Remote Mobile App FAQ document.

  If you need further help, feel free to post back.

• I can print apps but I am wireless and can't print from the web wat I do?

  I'm not sure why I can print apps and I can't print from the web, but I'm not sure what to do ideas?

  my printer is hp photosmart d110 all in one series

  Sorry tkdchick25, I see where you have Win7. Just click the start menu > Control Panel > programs and features > IE9 are updates once installed display that you are here in the list of updates and uninstall.  This will go back you to your previous version of Internet Explorer.  Let me know if it helps.  Thank you!