Similar Questions

• BlackBerry Smartphones BlueTooth will not enable

  I have a blackberry curve 8330 Sprint OS v4.3 and the Bluetooth was turn the days of the tooth. Then disabled Bluetooth itself for no reason and will not turn back. I got a new Jawbone 2 connected to what has worked well for 4 months with my other phone. Any help will be appreciated. Thank you for your time.

  Please solve the message, OK?

  Thank you

• Intermittent connectivity of Smartphones from blackBerry - headsets Bluetooth Jawbone

  I'm having a problem on a Blackberry 8220 Flip. I use the Jawbone 2 and it worked beautifully out of the box and associated for about a month without any problem. Now when I go to turn on my bluetooth I don't get a connection to the jaw. I thought I'd try and pairing again. Now when I install the jaw, I can get the code 0000. It says Pairing complete, connect to the jaw. After that, it hangs on fast forward to jaw... The bluetooth light come on but the sync never ends. The night last at work that I've been playing with it, did bring the pair up as if by magic. I noticed that there was a delay of 1 to 2 minutes or did not work at all when I push the button for voice dialing. I've done several resets hard on the phone and jawbone. Checked that Blackberry OS has been upgraded using the software of 4.7. This morning, I was sure the jaw was the question. I have paired the headset with Blackberry 8220 my wife and worked like a charm. Tried the back pair on my phone, hoping it works perfectly again. I could use some assistance.

  The point on the issue. It is a hardware failure, and fortunately the RAM was quick and painless. New 8220, works much better. It seems that I had a bad bluetooth transmitter.

• iPhone bluetooth connectivity 7

  I've recently upgraded to the iPhone 7 and have had problems of intermittent connectivity with Bluetooth pairing, especially in my vehicle (Kia Optima), but also sometimes with my bluetooth (Jawbone Jambox Big) speaker. With my iPhone 6s, I could always count on turning on the car or speaker and connect it without fail. Now, my car bluetooth could pair one out of every 10 times. My speakers will pair about 75% of the time. When I try to re-pair the car (a much larger issue) often the iPhone will not see the under its section discovered in Bluetooth Handsfree device. This is not the case with my wifes 6s iPhone (it's also on iOS 10.0.1). Does anyone else have this problem?

  Finally someone who has the same problem as me! I had noticed the bluetooth icon blink when I was on the phone setting up ApplePay with my CC company but I just thought it was restore my Apple Watch. Then when I left work I set up my iPhone 7 to work with my stereo handsfree in the car. It is remained connected for a little, but then randomly, he disconnects and refuses to reconnect. He does occasionally with my Apple Watch as well. Yesterday, I feel as if I had a stroke of luck using my BT headset since they worked for a good 45 min before I have them cut.

  I spoke with AppleSupport on Twitter and I did the steps that they told me to do. I reset the network settings and I have not matched and repaired the stereo several times. The only thing that I did is a complete restoration of iOS which seems odd because it's an iPhone brand new. I hope that it is just an annoying bug in iOS 10.0.1 and that an update will come out in a few days to fix. Worst case is a bad chip BT and I need to swap out for a new phone.

  My iPhone 6 had a BT connection problem.

• IPhone s 6 more does not connect to MacBook Pro

  I have a MacBook Pro (retina, 15 inches, mi 2014) 2014, 2.5 GHz Intel Core i7 processor! 6 gb 1600 MHz DDR3,

  Intel Pro Iris 1536 MB OS X EL Capitan. I checked the LMP bluetooth under system reports and the LMP version

  0x6.  I'm trying to pair a 6s iPhone more Version 9.2.1 (13D 15), model MKV92LL/A this phone is brand new.

  When I try to pair the two of them, he said MacBook Pro not supported.

  Also when I turn on my Mac it automatically shows the messages and gives me a code to enter. I go to Messages

  Select text Message Forwarding and enter the number. He'll be right back with another number and starts

  start all over again. When I try to close it, it just continues to do it.  I am connected to iCloud on both devices using the

  same apple ID. I also email and phone numbers boxes checked to receive messages from these two places.

  This is the first time I had all the important issues with my apple devices. I had a small problem connecting my

  my ear buds but Jawbone after a certain time has been able to fix it. I did countless research on this matter and did not

  haven't found a solution.  Please help one of the reasons why I made the switch from apple was integration. I was really looking for

  before you can use the hand off and all the other things that I should be able to do with these 2 devices.

  Thanks Steve cut Frame to finish

  Matching of an iPhone to a Mac is not supported. If you want to move the data, there are some options... Parachuting is a.

  Barry

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• connect blue tooth of poor quality with a dongle

  I tried two bluetooth dongles and have poor reception (unusable) when linking to my jawbone speakers and my hearing. These two connect with excellent quality to my s3 galaxy phone. I have a Dell Latitude E6420 using Windows 7 Pro and a 64-bit operating system

  Hi John,.

  Welcome to the Microsoft community.

  I understand from the description of the problem you are facing problem with Bluetooth connectivity. Let me know if I'm wrong. I'll be happy to help you on this question.

  I suggest you to update the drivers for the Bluetooth dongle from the manufacturers Web site.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also the links: Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  Connect to Bluetooth and other wireless or network devices
  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  I hope this helps! Let us know if you have more questions with windows in the future.

• Palm Pre and Jawbone 2 pairing problems

  I just bought a Jawbone 2 for my pre and I can't get the phone to recognize even I have fitted with a bluetooth device, let alone connect to it for a given period.  I have the piece of ear a few inches away from the phone and it keeps saying no devices.  Why is this so frustrating, that everything has to be a problem so far with this phone? I'm just glad, they got the EAS SSL question worked, but I have to use bluetooth and I don't understand why it does not work.  Fix this Palm or someone please let me know what to do.  Thank you.

  I have a jaw 2 and have no problem that the pairing so that never.

  Look here for putting the jaw bone in twinning mod.

  http://Aliph.custhelp.com/cgi-bin/Aliph.cfg/php/enduser/std_adp.php?p_faqid=143

  then search bluetoothe with pre devices.

  If it has not yet come there is probably a hardware problem in the pre or the jaw.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• How can I connect my 1Connectez 1st generation iPod (original iPod) to a laptop

  I have an original iPod and it has a screen old port how to connect it to a laptop and they don't have these kind of show ports more

  Not sure what you mean by "display port"...  The dock connector of the original iPod (2001) is a FireWire port.  You really have an original 1st gen iPod, with a (not key or click) scroll wheel that physically turns a circle?  Looks like this

  

  If so, it can connect to a computer equipped with a FireWire port .  To do this, not to connect to a USB port.  There are "scam" products that claim to be a USB-to-FireWire adapter cable, but they don't work; they can even cause damage to the iPod if used.  FireWire and USB work very differently (and even use different power supply voltages); You cannot connect them just by changing the shape of the connector.

  If your computer is a Mac (no FireWire port) with a Thunderbolt port, Apple sells a Thunderbolt-to-FireWire adapter.  On a Windows PC, to connect to the 1st (or 2nd) gen iPod, you add an expansion card of a certain type that provides an actual FireWire interface.  For more details, please provide more information on your situation.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• iPhone 7 - 10.0.2 - would not connect to wifi - got hot - DEATH

  I have an iphone brand new 7 (black) who has not seen a bump, the knock, the drop of water, or frankly anything that could damage it - always used with Chargers apple and cables only. I came home one day and noticed that my wifi woulndt connect. He would not even see the networks. The phone started to get hot and the battery percentage began to collapse, down 80% to 0% in about 15 minutes.

  When I tried to reconnect to the power, it will not even turn on, nothing, no display showing load or anything like that. Just completely dead.

  Ive owned every single iphone (except some S models) and have never had this happen. In fact, I could plug in my iphone 3gs right now and I'd be willing to bet $100 it load up and turn right into. Im just stunned, having given apple credit both for making bulletproof devices for years.

  What's the deal? anyone else having this problem? Ive looked online and I can't find anything. I have a genius appt tomorrow and Im prayer I can get a replacement same day. I have applecare +.

  Thank you

  George

  If there is something wrong with the device, Apple should replace it. However, they have the final call, and no one here can say exactly what they will do. Given the age of the unit, I suspect that you won't have problems getting a replacement. They should have stock for replacements. I wouldn't worry.

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• no possible backup - lost connection

  Hi all

  just try to create a backup of my iPhone (iOS 10.0.2) using iTunes (12.5.1) on an iMac (mid2010)

  the problem I keep running into is the following: phone is connected via the port USB iTunes recognizes it and the connection is stable. As I try to start the backup on my mac the phone responds and shows the rotation arrows on the top of the screen to indicate that a backup is in progress, but after that 5 seconds iTunes tells me that apparently, the connection was interrupted and the backup may not be completed. I did a backup but i´d like having directly on my drive. any ideas? THX

  pimpdanjo

  I am happy that you said that you use iTunes 12.5.1, as this is required to connect to iOS 10.

  Open iTunes, and then in the menu of iTunes, produce (iTunes on Mac or Windows) > Preferences > devices.  Looking for an iPhone backup here.  If you find one, remove it and then start the backup process again.

• iMac, loss of internet connection on sleep

  I have remote on my iMac all the time. I have problems with it the loss of connection to the internet since the upgrade to Sierra. I connected to the internet via an Ethernet cable. I'll lose connection 10-15 minutes after leaving my computer and access it remotely. I "Wake for network WiFi access" checked and enable the display of SETTING for 10 minutes. " I just had this problem in the past few days since the upgrade. Any help would be greatly appreciated, I also use it for the presentation of work very frequently and lose the connection during their. Thank you

  Tom

  Not quite the same thing as I'm not trying to access remotely, but since the upgrade to Sierra, my iMac mid-2010 do not reconnect to the wifi in the morning.  It is not slow, it will not reconnect all until I explicitly select the network.  I don't have this problem before the Sierra, and it doesn't seem to affect my Air mid-2012 (also on the Sierra).