JDE Eclipse no longer charge

Similar Questions

• IPad Pro 1st gen is no longer charging via rMBP end 2013.

  IPad Pro 1st gen is no longer the load via rMBP end of 2013 after the Ipad pro iOS 10.0.1 update

  can someone enlighten me on this issue? Apart from the iPad pro requires a larger draw of power than an iPhone.

  Thank you.

  I ask as its just designed by using redundant DuetDisplay and I need a complete battery to use the ipad as a second display now...

  Try alternative ways to charge your iPad here > If your iPhone, iPad or iPod touch won't charge - Apple Support

• Satellite T110 - long charge battery

  I got my T110 last week and I have since then charged only 3 times. However, I have the feeling, it takes much too long to load. It takes more than 4 four hours to make it complete. It would be the slowest computer I've ever had in this aspect. Is it my computer or it happens to everybody?

  Thank you.

  Hi Comodoro,

  Are you using the original Toshiba battery and AC/DC adapter or any part of 3rd party?

  To be honest, I can t say how long it takes until that the T110 is completely charged, because most of the time AC/DC adapter is connected then there s always fully charged.

  In addition it s depends on a lot of difference how long the battery will be charged, but I think there are at least 2-3 hours.

  Also check your user manual maximize battery autonomy and charging advice.

• Satellite L450-136 no longer charge with the AC adapter

  I was wondering if someone can help me.

  My laptop Toshiba Satellite L450-136 charge is no longer with the AC adapter.

  It is now run out of dead and the battery power.
  I don't know if the problem is with the computer or the power cable.

  It was working fine yesterday and then not work this morning.
  Nothing happened as the computer having fallen or anything.

  Does anyone have any ideas on how I can understand the problem and then fix it?

  Thank you!

  To be honest, I have two different laptops Toshiba (U400 and Tecra A11).
  The two race perfectly and never had problems charging the battery or similar
  I have other laptop which is 8 years from another manufacturer but the battery is dead, but it's nothing unusual for laptop that is so old ;)
  One of my friends has the same laptop as your Satellite L450 and this also works

  > I don't know if the problem is with the computer or the power cable.

  This can be verified if you would connect a power adapter new and tested.
  However, I think that it s not worth it to buy a new adapter only to run some tests, this should be done by technicians for laptop
  If your warranty is still valid, get in touch with the ASP guys and check this box

• Battery no longer charges. Fastboot OK

  Hi all

  After a long time with Android phones since 2009, it is the first time I have a question.

  Yesterday, I noticed that my phone was low battery and charge it overnight. Do not pay attention a lot the morning and used it a little bit. At work, I noticed that the battery was very low and went in there not load more than 3%. Leave it as this time a couple and realized it loads more - Screenshot 1

  After a long call this morning, the battery dies and it is now impossible to load.

  What I've done.

  When I plug, small battery + lignthing symbol. Nothing else. (shouldn't see an animation of the battery? I don't remember that the battery of this phone generally never dies.)

  Fastboot works well, I tried to fastboot erase userdata and cache, just in case.

  Time by pressing volume down + a couple of seconds, by following the instructions in the help forums, I see the small red symbol (and load text, but obviously do not charge) - screenshot 2

  When you press power + volume down on 15-20 years, same scenario as before, but text is green - screenshot 3

  I tried to contact the seller and the guarantee to work, but they are still trying to contact Motorola and seems complicated.

  Please help me, I have to use an iPhone 6 pending a guarantee/answer is just... so... iPhonish...

  
  

• JDE Eclipse plug-in

  Hello

  I write this message for tips and out of my concern for the current state of the eclipse for JDE plugin.

  As a newcomer to the development of blackberry, I tried to optimize a process for the development team to

  make their job a little easier, more specifically, the ability to debug our application in eclipse using the Simulator.  I managed to develop a simple application that I can with ease, call the debugger, however, I would like to know about 2 main problems I've noticed

  (1) be constrained in the CBC for source file

  (2) not be able to include libraries third 3rd in a workspace of blackberry.

  Problem # 1 is not a problem, it of a pain, but not as bad as (2).  As you know, most java applications use the libraries open source by preventing the Constitution of third-party libraries, life becomes very difficult, and I suppose that in some cases, people/companies drop this and move to another platform.

  What I really want to know is - what, work to correct these problems and to deliver a new version anytime soon?

  I hope you are because in its current state, you send a bad message to developers, youenjoy that problems with eclise JDE plugin google see what I mean.  I like to develop for the blackberry, but the lack of a debugger is a pretty serious problem.  Given that both Eclipse and Netbeans are main currents IDE, you will need to accept that most of the people will NOT fall to use your own custom made Java IDE.

  There was on my team talks about moving to another platform and is one of the main factors as bug fixing is a nightmare without a debugger and we have standardized on the use of eclipse.

  If the task to solve this is also very good, why not make it open source and you will have an idea of how much of an issue this is and how much people are willing to invest to make it better.

  If you are any chance to go to the Conference for developers in San Francisco next week, then it would be an excellent opportunity for you to ask in the future for various people on BOARD on the plug-in.

• AutoStart w/o JDE (Eclipse)

  I use the plugin Eclipse and all the docs seem to point to examples of JDE autostart configuration.

  Can you tell me what the JDE is hilarious on the autostart options so I can do the Eclipse?

  Thank you

  I havn't widely used eclipse, but you can find the autorun option in the ownership of the project.

• Laptop no longer charge! Battery almost empty, but is it also the faulty wiring?

  Is it possible to charge my battery now? I think my battery is completely dead now. In the past months, he stayed on less and less time without his agreement. Today, he says "battery 100%" "6 minutes". Usually, I have it just load by turning the charger cord in weird positions. I don't know if it of a faulty wiring or not. I'd rather just buy a new battery to deal with faulty wiring.

  Yes, I was making the change in your battery in the boot menu thing. I have a 625 HP and have had it for over 3 years now. Last year, I had to adjust my cable just so she can load. He stirs around a little bit when inside, but the cord/plug itself seems not loose or anything... Today, that did not work at all. I tried for several hours moving my rope to the right position for my laptop can turn on. I usually get it loads in not more than 1 minute, but today was different. Last year I replaced my load and it seemed in fact it is much easier to load. However, it is a loader rather newish and this is my battery at fault this time.

  My problem will resolve everything by getting a new battery? I can probably go to Best Buy or something. Or maybe buy one online.

  If you think that I can also be a problem with the faulty wiring, what can I do to get it fixed? I feel that this would cost me a lot. Or, do you get a new battery will solve my problem charging?

  If you think that I don't have faulty wiring, then should everyone jiggle their rope around until their laptop starts to load? It seems right that that's what I have to do just to power my laptop.

  In addition, if you think that Best Buy isn't the best place to buy a new battery (expensive as hell!), a link to a site worthy of confidence with fast delivery and the fair price would be great!

  Well, it really depends on a few things, but replace the battery and the charger is the first step to discover.  It is not too difficult to find replacements, fortunately.  Here is the battery and This is the charger .

  It could be a bad connection on the laptop itself, which would mean the jack needs replaced.  Not an impossible task, but it would have required a qualified technician to open the case to replace the power supply.

• Battery charging port is no longer charge the battery.

  The charging port on the laptop seems to the eye, didn't notice any visible damage. I have to recharge my battery using laptop of her husband... We have the same type battery. The charger works fine.

  Any thoughts?

  Thank you

  Kit

  So much worse... spoke to a gateway tech and he told me the problem is the chipset that controls the loading or the port itself.

  Thanks anyway,

  Kit

• Acer aspire 5740-6378 will no longer charge the battery under Windows 7

  The title sums it up.  I have a new computer that beginning yesterday will not charge the battery.  I didn't have problems with battery or power systems before that.

  * original title - (sector, do not load) with 21% of battery. It has been so for 24 hours after several reboots. It is a 2 month old acer aspire 5740-6378. Is there a way to reset the power control software? So far, he has played very well.*

  Managed to find a solution that worked for me.   I write this to help those who like me have sought a forum where this problem has been fixed.  I sent to acer tech support and they finally gave me this procedure:

  Could you please go through the following steps to perform a power drain: 1. unplug the adapter from the laptop. 2. remove the battery. 3. press in and hold the button for about 30 seconds, then release. (You won't see anything happen) 4. connect the power adapter to the laptop. Make sure that the power adapter is plugged in. 5. Start the computer as usual. 6. After Windows starts, insert the battery. I hope this helps someone! Mike

• I have just updated an Alcatel one touch fire to version 1.3 (firefox OS) and the market no longer charge

  I have just updated an Alcatel one touch fire to version 1.3 (firefox OS). Rigth after installation completed and restart, the market App has not loaded at all. He showed only a blank page and the exit button (x) that have nothing. I also tried to access market from the pre-installed browser (firefox), but the result was the same.
  E-mail has failed also. A message that a secure connection to the server imap.googlemail.com was not possible and that the certificate is not valid, appeared (something like that because it's in Greek). How can I fix these problems? If not, how I can return to the previous version (1.2) rll?

  Hello, can you check that your clock system, the date and time are always well positioned?

• Satellite A500-19 t - battery no longer charges

  Hello

  I have a Satellite A500-19 t and since last week my battery is fresher.
  When I start the laptop, the battery light is turned on for a few seconds, and then turns off.

  In windows, he knows the battery is in place, but it does not load it. Is the battery that is dead?
  Should I buy a new one?

  Or could it be something else?
  Has anyone experienced this problem?

  Hello

  Try to update the BIOS.
  Sometimes the BIOS update allows to solve some battery problems, but to be honest, it sounds a little like a malfunction of the battery in such a case, the battery must be replaced.

  Incidentally... try this work around:

  Disconnect the AC
  Shutdown
  Remove the battery
  Connect AC
  Startup
  Under the category of batteries, all ads by Microsoft ACPI compatible control method battery do a right-click and select Uninstall (it ok if you only have 1).
  Shutdown
  Disconnect the AC
  Insert the battery
  Connect AC
  Startup

• InDesign is no longer charge

  Hello

  It's something that struck me as strange. I used the program earlier today very well, and when I pulled it came out very good, no error or anything.

  But this afternoon it will not load. I made no changes to my system, although between the closure of the programme and attempt reopening of InDesign updater for Adobe media encoder component updated. I doubt that his associates, but this isn't the only change that's happened between labor and it.

  When I load the app it loads in the list of processes in Windows, but the splash screen never appears and niether does the application itself. I tried in administrator mode by restarting the PC and reinstall InDesign, and none of them make a difference.

  For reference, I use a updated Windows Vista Ultimate 64-bit version.

  Any ideas on how to solve this problem? Or has someone else encountered something similar? I did a good search everywhere for something similar, but I guess that its either quite rare or my search terms are not so good

  Create a new account fixed user, but only for this account. Its a useful solution in the short term, but I especially want to another account purely to use InDesign.

  Of course. It was a test, not a solution.

  I have seen several types of problems solved on the basis of a new user account. These problems are usually fixed by deleting files in the folder temp of the user account:

  C:\Documents and utilisateur\Local Settings\Temp Settings\nom

  The path of this folder is for XP. I don't know what would be the equivalent path for Vista. If it works, please let me know what is the path of Vista.

  I copy the files and folders in my temp folder in a backup folder before deleting.

  Ken

• Wireless flash drive... How long a charge stick when in service

  I loaded my flash drive last week. On the instructions it says that you should see the orange light and it stops once loaded. I've never seen the orange light while charging. I put the drive to the USB port to recharge last night and the ipad app shows that it is totally charged. I need it for my class in college in two days.

  How long charge you? the app shows a change in the level of the battery? try other USB ports or an AC charger if you have one.

• Preprocessing in Blackberry JDE plugin for Eclipse

  Hello

  Here's a piece of code

  //#preprocess
  public class Main {
  //#ifdef AAA
      int x;
  //#endif
      int x;
      x = 3;
  }
  

  If I run the JDE Eclipse plug in point 1.1, it works perfectly.

  However, when I use Eclipse 1.0 component package 4.2.1 plugn it does not work.

  Eclipse is said to 'Duplicate the field Main.x'. (I have not "define constants 'AAA')

  Any idea on this?

  Eclipse 1.0 and package 4.2 does support preprocessor?

  (I need to develop the application that support 4.2.1 so it is important to use JDE 1.0 eclipse plugins).

  Thank you in advance.

  I found the solution:

  Define an arbitrary Constanst (preprocessor definitions) in the project properties.

  That activates the function "preprocessing" of eclipse and everything works fine.