JDE throws a Null ex pointer when connecting to sim

Similar Questions

• Password of Firefox showing under points when connecting

  When registering for a site my login email and password are normally shown with the password showing only the Department of transport. Now it shows to me a small greyish window under my password with the actual password visible? Started making this x 3 days

  Using password modules or programs?

  Start Firefox in Safe Mode {web link} by pressing on the
  (Mac = Options) key and then from Firefox. A small dialog box should appear. Click start in Safe Mode (no refresh).

  Is always the problem?

• When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

  When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

  There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

  I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

  Does my keyboard or a virus, my usb port, the update of security or something else...?

  I use this computer without problem for a few years.

  Thank you, Kathy

  osX version 10.9.5 processor 2.3 GHz intel core 17

  First try another KB

  Next

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• ObjectChoiceField throw a Null pointer Exception error

  Could someone help me please.  I have an ObjectChoiceField object that throws a null pointer exception and I know there was another post but I don't yet understand why.  This is how I create the object and fill it with four points.  Thank you!

  lv_loc1 = "Arlington Heights";
  lv_loc2 = "Waterloo."
  lv_loc3 = 'Fort Madison';
  lv_loc4 = "Colorado Springs";
  String [] lv_locs = {'Loc1-' + lv_loc1, 'Loc2-' lv_loc2, 'Loc3-' + lv_loc3, '-Loc4' + lv_loc4};
  int lv_start_psn = 0;
  ObjectChoiceField lv_locChoice = new ObjectChoiceField ("", lv_locs, lv_start_psn, LabelField.FIELD_HCENTER)
  {
  public void layout (int width, int height)
  {
  Super.Layout (lv_btn_width, lv_btn_height);
  setExtent (lv_btn_width, lv_btn_height);
  }
  };

  Here's how I'm trying to get the selected item

  lv_str = (String) lv_locChoice.getChoice (lv_locChoice.getSelectedIndex ());

  I know that it should be a simple way to do it, here is what I finally realized. It returns the index value to the lv_choice_sel variable, which is a variable so now I can use it throughout the app.

  --------------------------

  String [] lv_locs = {lv_loc0, lv_loc1, lv_loc2, lv_loc3, lv_loc4, lv_loc5};
  int lv_start_psn = 0;
  lv_locChoice = new ObjectChoiceField ("", lv_locs, lv_start_psn)
  ObjectChoiceField.FIELD_HCENTER | ObjectChoiceField.USE_ALL_WIDTH)
  {
  protected void fieldChangeNotify (int context)
  {
  lv_choice_sel = Integer.toString (getSelectedIndex ());
  If (lv_choice_sel is nothing)
  {lv_choice_sel = '0' ;}
  }
  };

• Loop drops when connected wireless (NI 9191)

  Hello

  I can't understand why an a chassis OR cDAQ 9191 a connection drops when connected wireless and works

  perfectly when it is connected to the LAN.

  I wrote a small essay VI to check the accuracy of the connection. The chassis has a module of e/s 9375 OR plugged.

  A Moxa AWK3121 is used as a wireless access point. What I do is check 5 digital inputs and control outputs 3 digital.

  The outputs are continuously placed power at a different pace. I use a loop of events and a main loopt that communicates

  on the chassis at a rate of 10ms loop.

  

  

  The chassis, the laptop and the Moxa A.P. are all close together on my desk. The Wifi signal is excellent.

  Now, the code I wrote is probably not optimal.

  But...  If I start by connecting the chassis with a LAN cable to my laptop, Wifi disabled, Local bound. Communication is perfect.

  No drops between loops and real-time.

  No communication error. Runtime was 52 minutes.

  Second test. Connected the chassis to the A. P. Moxa with LAN cable. Laptop connected wireless to the A.P. Moxa

  Chassis in Local link. IK can access the chassis in Max no problem.

  When I run my test, I immediately see pauzes loop. After a minute you can already a difference of 20 sec.

  between calculated looptime and in real time. The led on the chassis will sometimes market.

  When the light is out, the loop is pending. (Which is normal because I assumed that the acquisition of data VI are awaiting response).

  After appr.10 minutes the error-50405 'no transfer in progress because the transfer was abandoned by the customer'.

  If I look at the timings, there is already a difference more then 5 minutes between the moment where the loop and real-time.

  

  I tested with the chassis and the PC last connected wireless to the A.P. Moxa

  I don't have the error of 50405, but once again the loop drops. After 10 minutes, we went from 2 minutes.

  

  Someone at - it experience with wireless with the NI 9191 chassis connections?

  Can I change my code? I've put something? (I'm a newbie to Labview)

  For any help or suggestion would be appreciated.

  Thanks in advance.

  Frankie.

  LabVIEW 2014 SP1 (32-bit) on Windows 7 Enterprise (X 64)

  Chassis and Moxa all updated to the latest firmware.

  
  

• Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

  Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

  You try to reset by pressing the power button / stop 20 seconds does not help.

  Using different USB ports does NOT help.

  The cable using different USB does not help.

  Another computer has NOT appeared.
  

  SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

  Jonathan Bailey is me:

  Kyle Ahmed is the man of SanDisk tech support:
  

  
  

  Of the troubleshooting information for "not recognized by PC.
  ***************************************************************************

  Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
  Jonathan Bailey: black, Sansa Clip +.
  Kyle Ahmed: Please provide me with the ability as well?
  Jonathan Bailey: I think it's a 4 GB
  Kyle Ahmed: Please tell me when and where did you buy this drive?
  Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
  Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
  Jonathan Bailey: No, it is not when connected by USB.
  Kyle Ahmed: Please tell me, are you using Windows 7?
  Jonathan Bailey: Windows 7
  Kyle Ahmed: I understand. Please connect the player to the computer.
  Jonathan Bailey: It should say READING and WRITING.
  Kyle Ahmed: very well. If you please, right click on computer and select manage.
  Kyle Ahmed: Click Device Manager in the left pane.
  Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
  (if the player has MSC) 2. portable (if the player is set to MTP mode)
  Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
  Jonathan Bailey: a yellow exclamation point icon
  Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
  Jonathan Bailey: icon done, went
  Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
  Jonathan Bailey: said device still WRITTEN in reading
  Jonathan Bailey: said ball driver software not properly installed
  Kyle Ahmed: very well. Please disconnect the player from the computer.
  Jonathan Bailey: ok, says still WROTE
  Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
  Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
  Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
  Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
  You should see it in the devices with removable storage section in the computer.
  Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
  Kyle Ahmed: Check if the drive is recognized by the computer.
  Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
  Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
  Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
  change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
  by creating playlists with Windows Media player to transfer songs from your player.
  Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
  Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
  Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
  Removable storage in the computer (Explorer)?
  Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
  Kyle Ahmed: Please disconnect the player from the computer.
  KKyle Ahmed: Please activate the drive.
  Kyle Ahmed: Then go to settings > system settings > USB mode.
  Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
  Kyle Ahmed: PSG and click the Center button to confirm.
  Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
  Jonathan Bailey: OK now recognized as his former self again.
  Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
  Jonathan Bailey: I have not checked the media player yet
  Jonathan Bailey: it is recognized in Explorer
  Kyle Ahmed: Please disconnect the player from the computer.
  Kyle Ahmed: To check the version of the Firmware of the player.
  Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
  Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
  Kyle Ahmed: Go to settings > system settings > Info.
  Kyle Ahmed: Give Me the version of the firmware of the drive please.
  Jonathan Bailey: Version V01.02.16A, isn't it?
  Kyle Ahmed: It seems that the version is up-to-date.
  Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
  songs that have been transferred, which can take the time to read.
  Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
  Kyle Ahmed: I understand.
  Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
  Kyle Ahmed: You should not face additional problems.

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• After running System Restore my computer asks for a password when connecting and I don't remember the password.

  I am running Vista Home Premium on a laptop Toshiba Satellite L305.  I ran the system restore due to a problem of "Internet Explorer cannot display the website" (by Microsoft troubleshooting guide for this problem) and selected restore point earlier.  Now the computer asks for a password that I don't remember.  I tried all the possible passwords I can think.   There is only a single user account on this computer.  The administrator account should be disabled, it is not an option when connecting safe mode.  I don't have a system repair disc set.   Is it possible to run the system back restore to select a more recent restore point which does not require a password?  Or y at - it another way to connect to the computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/undo-system-restore

  If you tried to use the system restore to solve a problem, but the problem remained or other problems were introduced, you can undo the restore operation. After you cancel the system restore, you can try using a different restore point.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones phone hangs when connected via USB

  Hi I have a Pearl 8120. There is a problem where the phone will break if I connect it to some PC via USB.

  When I say that it blocks the screen turns off and the red light stays on. To recover from this point, I have to unplug and reinsert the battery.

  But for example if I connect it while the PC is not started in Windows so it will not crash.

  When I connect the phone via a charger cable is also very good, and never, it hangs on my own PC at home.

  Is there a way to fix this?

  Hi, it seems that too much effort for reload software blackberry at this stage.

  Although I solved the problem by changing the option "Auto enable mass Storage Mode when connected" guest.

• Can I set a default role to that point of connection?

  Hi all;

  I have a doubt of roles.  After three roles assigned to the test user.

  SQL > select dealer, granted_role dba_role_privs default_role where dealer = 'TEST ';

  DEALER DEFAULT_ROLE

  --------------- ------------------------------

  TEST R1

  TEST R3

  TEST ORCL_DEV

  SQL > alter user test by default role orcl_dev;

  Modified user.

  SYS > select dealer, granted_role dba_role_privs default_role where dealer = 'TEST ';

  DEALER DEFAULT_ROLE

  --------------- ------------------------------

  TEST R1

  TEST R3

  TEST ORCL_DEV

  $ sqlplus test/test

  TEST > select * from session_roles;

  no selected line

  TEST > set orcl_dev role identified by oradev;

  Role play.

  When I connect you as "USER of TEST" stated I must perform the role play .

  so, what's the point to set the default role for users?

  Without executing set instruction role, can I get a default role to that point of connection?

  '

  Thank you.

  Hello

  default role assigned to the users are by default roles. This means that roles does not need to be explicitly enabled with set role.

  If you set a role as a default to a user role, it must be explicitly enabled.

  that is to say:

  SQL > create user identified by test test

  Created by the user.

  SQL > grant create session to test

  Total grant.

  SQL > create role r1

  Created role.

  SQL > create role r2

  Created role.

  SQL > create orcl_dev role

  Created role.

  SQL > grant r1 to test

  Total grant.

  SQL > grant r2 to test

  Total grant.

  SQL > grant orcl_dev to test

  Total grant.

  SQL > alter user default test except orcl_dev's role

  Modified user.

  SQL > select the dealer, granted_role, dba_role_privs default_role where dealer = 'TEST '.

  DEFAULT_ROLE GRANTED_ROLE ASSIGNEE

  ------------------------------ ------------------------------ ------------

  TEST                           R1                             YES

  TEST                           R2                             YES

  TEST                           ORCL_DEV                       NO

  3 selected lines.

  sqlplus test/test

  SQL * more: Production version 11.2.0.1.0 Mon May 18 10:03:15 2015

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from session_roles;

  ROLE

  ------------------------------

  R1

  R2

  SQL > role play all;

  Role play.

  SQL > select * from session_roles;

  ROLE

  ------------------------------

  R1

  R2

  ORCL_DEV

  For more information you can take a look at the Oracle documentation on roles:

  http://docs.Oracle.com/CD/E25054_01/network.1111/e16543/authorization.htm

  Kind regards.

  Alberto

• Process page not throwing no data found error when you remove the item in a table

  Hi guys,.
  
  I'm trying to run a process page just before the process of MRU in tabular form and it is throwing an error no data found . Here is my code:
  

  BEGIN
       
       for i in 1..apex_application.g_f02.count LOOP     
            
            IF apex_application.g_f01(i) is not null THEN
                 
                 UPDATE STOCK
                      SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                 WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                 COMMIT;
                 
            END IF;
       END LOOP;
  END;

  F01 here is the checkbox column and the if statement is the cause of the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
  
  When I click on a checkbox, and hit the Remove button what fires off times this process and then the MRU, I get the error not found data .
  
  Would appreciate it if someone could shed some light on this. Thank you very much.
  
  Published by: taepodong on July 1, 2012 07:54

  Hello

  >
  I'm trying to run a process page just before the process of MRU in tabular form and he throws no data were found error. Here is my code:

  BEGIN
  
       for i in 1..apex_application.g_f02.count LOOP     
  
            IF apex_application.g_f01(i) is not null THEN
  
                 UPDATE STOCK
                      SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                 WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                 COMMIT;
  
            END IF;
       END LOOP;
  END;
  

  Here f01 is the column of the box and the if statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.

  When I click on a checkbox and click on Remove button that triggers both this process and then MRU, I get the no found error of data.
  >

  You iterate over the f02 and seeking f01 not null. It's the misuse of the checkbox element. Please see these links. in particular the examples of process OnSubmit.
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215

  Kind regards

  PS: That's what you need to understand
  >
  Note that the boxes displayed by using APEX_ITEM. CHECK box will only contain values in the APEX_APPLICATION tables for those lines that are checked. Unlike other elements (TEXT, TEXTAREA, and DATE_POPUP) that can contain an entry in the corresponding table of APEX_APPLICATION for all submitted ranks, a checkbox will be an entry in the APEX_APPLICATION table if this option is selected.
  >

  Published by: Dominique July 2, 2012 09:44

• Still play songs from my iPhone when connected to wifi

  Had this problem before, but it stopped happening a while ago only to re - emerge with the iOS 10 update.

  I'm running on an iPhone 6 and used to play my music library on shuffle.

  Over the years, I've deleted some songs from my library of songs, but they remain available for re - download in iCloud.

  However, from time to time, if I play songs on shuffle when connected to wifi, one of these songs removed will be available on my phone and play.  It does not download to my phone and still only available for download on iCloud.

  Is it possible to stop these removed songs to play on quite my phone when connected to wifi?

  I'll add that I'm not on all subscriptions either except to increase my storage iCloud.

  Post edited by: sound_man

  I believe that you open the music application, select "download music", then make your choices from there.  If you do not select the "download music" it will first play all the songs that you have purchased.

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please. I have

  Indicator light charging cable does not go on when connected to power what a lack of cable or battery problem? Advice please.

  Troubleshooting help here > Apple Portables: Troubleshooting MagSafe adapters - Apple Support

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)