JMS adapter to consume and produce

Similar Questions

• Want JMS adapter to consume the HornetQ section data

  Hi all
  I have a stand-alone hornetQ topic with a durable subscriber. Now I want a BPEL process with adapter to JMS that will consume the hornetQ field data. I have all the hornet associated jar files. I already have all the jar files in the folder of wls. Then set the PRE_CLASSPATH in the setDomainEnv script. But now, JMS adapter, I chose option of third party. After that, it will ask for JMS JNDI connection. What should I enter here? I need to create any JNDI in weblogic console? If yes then please give me steps to that end.
  
  Thanks in advance.

  Hello

  In the 2nd screen it ask the service name and it can be any name and select advance option queues in the display 3.

  If you configure you queue name to the foreign server on the destination tab, and then in the configuration of the card in the screen 7 you will see the queue, select the name and give the correct JNDI name eis/aqjms/queue or ist/aqjms/threads - in case if you use default JNDI names.

  Hope this helps you.

  Kind regards
  Tarak.

• Moving Consumer and Producer to the test environment.

  Hello
  
  Move when the consumer and the producer WLP 9.2.1 applications from DEV environment for the test environment what are the steps that we must do in order to get all the Federated pages/books/portlets of consumption of the test environment? We using the same hostname in dev and test environment, simply by changing the ip address of the host in the backend.
  
  Is that all we have to takecare specifically when we spread?
  
  Thanks in advance
  Rajesh

  Hello Renon,

  For option 2, I believe that the steps would be:

  1. Consuming portlets from the producer of staging environment
  
  
  2. Set preferences in the portlet Federated on the consumer and the test, keep track of what preferences have been on portlets for step 5.
     
  
  
  3. Propagate from the intermediate producer to the producer if necessary production - as long as the same ears and wars are deployed on the production and staging of producers, spread may not be necessary if it is used only as a producer.
  
  
  4. Spread all the portlets intermediate consumer to the producer of the production. The propagation tool will spread Federated portlets, but when it installs them to the producer of the production, the spread of WLP 9.2 tool is to assume that it points to same instance of producer than intermediate consumers. Since this is not the case for your installation, all of the custom federated portlets will be broken on the consumer of the production. If you have configured the consumer of production with the same producer handle that you used in the staging environment, Federated portlets that have never custom should work after propagation.
     
  
  
  5. By using the administration tools, remove these custom federated portlets broken consumer of production and re-create them, adding the preferences of step 2 and add them in the appropriate pages.
     
  
  

  Unfortunately, this is not a single task. Whenever you do not want to propagate staging to production, all custom federated portlet must be re-created on the production environment with appropriate preferences. This includes the portlets that you had changed a preference on and portlets that you had not changed the values preferably on since the last time that multiply you, because the propagation tool will overwrite these instances of portlet on the consumer of production with invalid portlet CCP handles.

  WLP 10.0 and later, the steps are much easier - you would just run the tool in spreading on the producers, while consumers and any customizations would be automatically transferred from the staging to the production.

  Kevin

• JMS Adpapter consumer - and mark listening to message question

  Hello.  I use 11.1.1.7 Jdeveloper and SOA Suite that comes with this version.

  I am trying to understand JMS adapters.  Of course, I'm new to JMS and SOA Suite, so I'm learning both.  (so please try not to be too cryptic if you answer).

  I get a lot of messages contradictory and exasperated, asking for clarification.

  Here is my information and examples:

  1. I created an application that sends a message via JMS successfully to a queue and - EVEN ON weblogic server and domain - successfully comes from this message another application that uses the JMS message (and then he treats).

  2. However, if the consumer application is not on the same application server / domain as the publication server.  (I tested this by creating a second application on another computer server/domain and published the application look (even) to it.)  When I published a message on the server 'A' on the server 'B' consumer demand does not kick off and treat it (as he did when he was on server A).

  3. According to this post https://forums.oracle.com/thread/2506054 they try to have a JMS adapter just to sit and listen to the messages in a queue.  Someone answered and said there is nothing out of the area to do so and that you must build a tool to do this.

  4A what good is a JMS application consume if she isn't actually query for messages?  (In other words, I suppose he could query for messages).

  5. I can't find the specific mention of it, but a lot of documentation has indicated this election will be JMS messages.

  6. most examples of different books of SOA downloads show JMS using adapters that are supposedly polling for messages.

  Thus, in the East:

  a. no JMS adapters ask for messages or do you have to plan the application to run and kick off the JMS poller.

  How would b. you do that in SOA Suite using SOA components?

  Thank you very much.

  Stuart

  Gratitude and infinite respect points will be rewarded for the answers!

  As far as I know and I put in place,

  a. no JMS adapters ask for messages or do you have to plan the application to run and kick off the poller JMS?

  JMS adapter queries messages if you have it set to 'Queue' messages.

  How would b. you do that in SOA Suite using SOA components?

  You can use the adapter to JMS SOA Suite with the option 'Disable the queue' and should also have created a Pool of connections to the JMSAdapter configured in Weblogic which refers to the queue that you are listening to. Also make sure that your queue is accessible from the servers that you use "Server A" and "B server.

  Thank you

  Wajid

  http://www.YouTube.com/channel/UCOKrIq2ltqnLtItOwxSnIKA?feature=watch

• Store and Forward jms adapter agent configuration - jdeveloper

  I'm created the store and forward (SAF) agent in weblogic to connect with another weblogic server.

  After I tried to set up in Wizard jms adapter, but I can't see my queue of FAS there.

  so now, how can I give my SAF queue payload to test.

  Please provide suggestions, I'll give you points.

  Thank you

  Ajay Athuluri

  Finally, I learned I should do the AIA PIPS configuration to automatically get these queues of FAS.

• JMS adapter - it works on the internet

  Hello
  The fact of carrying messages JMS adapter using "HTTP" or "TCP/IP". In other words can produce and consume messages from a source outside the company (local area network) system. He can speak with a supplier on the internet.
  
  Thank you

  It depends on the implementation of JMS from your choice. The JMS adapter uses JMS, JMS is not a product but a standard. There are many implementations. For example, you can use AQ Oracle or IBM MQSeries as the implementation, to name two common possibilities.

  It may be possible to configure the tunneling over HTTP, but by default, most implementations use the native high-performance protocols.

• The limitation does not not as expected in the JMS adapter

  Hello
  
  I have a BSE consumer (name: ConsumerESB), that retrieves messages from a weblogic JMS queue and routes them to a BPEL (InvokedBPEL) process.
  The queue will get messages in mass 5000 requests at once and I need to implement the limitation to process applications slowly.
  
  
  Here's what I put.
  
  For the .esbsvc map file, I put
  
  minimumDelayBetweenMessages - 3000 (3 seconds behind should be there between each message)
  adapt. JMS. Receive.threads - 1
  DequeueTimeOut - 3
  
  According to the above definition, I think, a request must be sent by second and three seconds between two messages.
  But I don't see that past, I think I'm getting something like 4-5 requests per second.
  
  The limitation does not seem to work.
  
  Later, I tried the following options:
  (for adapter .esbsvc)
  minimumDelayBetweenMessages - 10000
  adapt. JMS. Receive.threads - 1
  DequeueTimeOut - 10
  
  
  (for .esbsvc routing rule) - got - I need this setting for the routing rule esbsvc?
  minimumDelayBetweenMessages - 5000
  DequeueTimeOut - 5
  
  Now, I see only one application per second.
  
  Can you please let me know how can I get a perfect delay of 3 seconds between two messages.

  I raised a SR with Oracle and discovered that the minimumDelayBetweenMessages property is only applicable for BPEL and not BSE. Therefore, I created a BPEL consumer instead of a BSE consumer and applied to the property of limitation. It worked.

  SR link is below for reference.

  https://support.Oracle.com/epmos/faces/SrDetail?_afrLoop=38176284950252&srNumber=3-6559897401&_afrWindowMode=0&_adf.CTRL-State=18obtvw6uw_4

• Error: Invalid Configuration for the JMS adapter

  Hello!
  
  I do a test with the CEP to get messages from a WebLogic JMS queue but I get the following error:
  
  < BEA-2045010 > < the context of the "Test" application could not be initialized: org.springframework.beans.FatalBeanException: error initializing context of life cycle; nested exception is java.lang.IllegalArgumentException: configuration not valid for the JMS adapter, you must Bean or specify a converter or an event type.
  
  Teste.Context.xml:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  < xmlns = "http://www.springframework.org/schema/beans" beans
  xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance".
  xmlns:OSGi = "http://www.springframework.org/schema/osgi".
  xmlns:wlevs = "http://www.bea.com/ns/wlevs/spring".
  xmlns:JDBC = "http://www.oracle.com/ns/ocep/jdbc".
  xmlns: space = 'http://www.oracle.com/ns/ocep/spatial. '
  "xsi: schemaLocation =".
  http://www.springframework.org/schema/beans
  http://www.springframework.org/schema/beans/Spring-beans.xsd
  http://www.springframework.org/schema/OSGi
  http://www.springframework.org/schema/OSGi/spring-OSGi.xsd
  http://www.BEA.com/ns/wlevs/spring
  http://www.BEA.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
  http://www.Oracle.com/ns/OCEP/JDBC
  http://www.Oracle.com/ns/OCEP/JDBC/OCEP-JDBC.xsd
  http://www.Oracle.com/ns/OCEP/spatial
  http://www.Oracle.com/ns/OCEP/spatial/OCEP-spatial.xsd ">."
  
  < wlevs:event - type-repository >
  < wlevs:event - type the type name "Pet" = >
  < wlevs: class > testewithprotobuf. MyPet$ Pet < / wlevs: class >
  < / wlevs:event - type >
  < / wlevs:event - type-repository >
  
  < wlevs: adapt id = "pet_messageAdapter" provider = 'jms-entrants' >
  < wlevs:listener ref = "pet_inputChannel" / >
  < wlevs:instance - name of the property = "converterBean."
  REF = "PetMessageConverter" / >
  < / wlevs: adjust >
  
  < wlevs: channel id = "pet_inputChannel" - type of event "Pet" = >
  < wlevs:listener ref = "pet_messageProcessor" / >
  < / wlevs: channel >
  
  < bean id = "PetMessageConverter" class = "testewithprotobuf. PetMessageConverter"/ >
  < bean id = "PetBean" class = "testewithprotobuf. PetBean"/ >
  
  < wlevs:processor id = "pet_messageProcessor" >
  < wlevs:listener ref = "pet_outputChannel" / >
  < / wlevs:processor >
  
  < wlevs: channel id = "pet_outputChannel" - type of event "Pet" = >
  < wlevs:listener ref = "PetBean" / >
  < / wlevs: channel >
  < / beans >
  
  My converter class:
  
  import java.util.Collections;
  import java.util.List;
  
  Import javax.jms.BytesMessage;
  Import javax.jms.JMSException;
  Import javax.jms.Message;
  
  Import testewithprotobuf. MyPet.Pet;
  
  import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
  import com.bea.wlevs.adapters.jms.api.MessageConverterException;
  import com.google.protobuf.InvalidProtocolBufferException;
  
  / public class PetMessageConverter implements InboundMessageConverter {}
  
  @SuppressWarnings ("rawtypes")
  @Override
  conversion of public list (message Message) throws MessageConverterException.
  JMSException {}
  
  BytesMessage, bytesMessage = message (BytesMessage);
  
  long bodyLen = bytesMessage.getBodyLength ();
  ubyte [] buffer = new byte [(int) bodyLen];
  
  bytesMessage.readBytes (buffer);
  
  try {}
  Pet animal = Pet.parseFrom (buffer);
  
  Return Collections.singletonList (pet);
  
  } catch (InvalidProtocolBufferException e) {}
  throw new MessageConverterException (e);
  }
  }
  }
  
  Please, what is the problem?
  Thank you!

  This error usually indicates that you have two type of event and bean converter specified or not specified. In your case, which does not seem the case by looking at the source file. You could also paste the contents of your configuration of the directory META-INF/wlevs file?

• How to assign a dynamic name of the factory of connections to a JMS adapter

  Hi all
  
  IM using JDeveloper 11 g Release 1 version.
  
  First of all, I need to get the name of a table connection factory and then passing to the JMS adapter is it possible? I can potentially affect the connection factory name a kind of variable and then assign a value to what I get from the database?
  
  Thank you very much
  José Correia
  BB - D

  Hello
  You can do this by setting the properties of JCA in the invoke of the adapter. Open the BPEL/mediator who calls the adapter when BPEL click twice on the DB adapter inoke-> go to the Properties tab and set the /jca.db.XADataSourceName 'jca.db.DataSourceName' with a variable value by using exp. Builder. In your case, get the value of the DB and set the property with the value of DB

• Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT &amp; T U-verse services?

  Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

  Why have something to do with your Uverse services?

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• S2415H adapter part number and possibly how to buy a replacement?

  I have misplaced my adapter while moving and can not understand which adapter I need to buy, either 3rd party or Dell (if they sell them).

  My monitor is the S2415H, but on the back, it is listed as S2415Hb. Not sure if there is any difference.

  I tried to chat/email technical support, but the monitor has no serial number and the serial number does not work so I can not simply contact technical support which is currently closed by phone. If someone who has the same monitor could help or if dell support can provide the part number it would be appreciated. I would like to order as soon as POSSIBLE I currently can't use my PC without him.

  1XRN1 = power adapter 65w
  K260C = power cord

• JMS adapter Request-Reply does not

  I created a request-response in the JMS adapter, but its does not work... can someone suggest me the script step by step...

  Blog of Biemond has a good...
  http://Biemond.blogspot.com.au/2009/10/JMS-request-reply-interaction-pattern.html

• Do we have something like a deployment plan for PART JMS adapter?

  We have an obligation to deploy our application to the cep of the oracle where we use JMS adapter. How can replace us the adapter of the URL of the JMS PART service during deployment? We want to avoid having the 3 packages with different endpoints, one for each environment.

  Hello

  Smart...

  Now that I think about it a little more, I think that you should have used our PropertyPlaceholderConfigurer:

  http://docs.Oracle.com/CD/E17904_01/apirefs.1111/e14303/com/BEA/wlevs/spring/support/ConfigurationPropertyPlaceholderConfigurer.html

  Give it a try when you get a chance.

  Thank you
  Alex

• two loops of consumer a producer, dequeue even item in two consumer

  Hello!

  What is the best way for the following:

  I have given in my loop of producer enqueu. I need this data dequeue-d in both loops of my intake, but I want to dequeu the same element in two loops.

  Of course if I take off in two loops, then the second loop of consumer will lose the odd elements and the first loop of consumer will lose the same elements.

  Thank you!

  Hello

  Create two queues or use notifiers...