Join a domain

Similar Questions

• Satellite P100: XP Pro Media Center - unable to join the domain

  Recently bought a P100 with XP Pro OS but I'm not to be able to join the field to work correctly. Normally, to create a new account on the SBS 2003 server, then from the PC "join the domain.

  Clues?
  Peter

  Hello

  You should better check the Small Business Server site. You will find FAQS:
  http://www.smallbizserver.NET/

  Also check this:
  http://www.experts-exchange.com/Operating_Systems/SBS_Small_Business_Server/Hot_Solutions_1.html

• px12-350r unable to join the domain - what now?

  Hi all!

  I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.

  Here is what happened:

  * The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.

  * I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.

  * After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.

  * I don't alter the domain infrastructure.

  * I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".

  I have already tried:

  * Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.

  * Connection via SSH. Does not work, probably for the same reason as above.

  I wasn't yet:

  * The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?

  I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)

  Thanks for your help!

  Best regards

  Florian

  Hi André,.

  I fixed it without reboot - by chance.

  In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.

  I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.

  So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.

  Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.

  Andrew Merci for your support!

  Best regards

  Florian

• Tecra A9: Cannot join a domain or view Web sites wireless - Vista

  I'm having a problem with the network card wireless on this new installation of Vista.

  I can discover & connect to a wireless router, no problem, but when I try to join a domain or view most web pages does not have only ball.
  I can ping local and external addresses and web pages works without any problem at all.
  I tried to update the drivers from the website of toshiba wireless and when that has not made a difference on the site of intel, but nothing helped.

  If I plug in a network cable, everything works fine.

  I have a laptop running XP that connects to the same wireless router and has none of these problems.

  Help!
  Stu

  Seems that there is nothing wrong with your all wireless lan device. I think that there are some Vista settings, preventing certain pages internet working, perhaps built in the anti-virus program or firewall. Internet Explorer 7 has built in functions of security as well, so you can take a look at this.

  Perhaps the first thing you could try is to use another browser, like firefox and check the settings of the firewall.

• I cannot join the domain in my office with my home edition, Windows

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  XP Home Edition is not supported to join a domain. XP Professional is.

• Problem to join a domain with Windows Vista Bussiness

  I have my domian with Windows Server 2008 standard, on my network, I have Windows XP, 2000, Win7 and Vista computers and laptops.

  I have no problem to join all computers, but when I try to join a computer or laptop with Vista it keeps giving me this error:

  "An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Please check that this client is set to reach a DNS server that can resolve DNS names in the target area.

  I already do a little research on the web and try disabling IPv6, I also create the computer in the ad before attempting to join the domain, so far without success.

  Thanks in advance for your answers!

  Hi Arturo,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server - general forum

• force GBA v.5 to join the domain with a certain domain controller

  Hello world

  I try to join a CBS c. 5.3 to the domain.  My acs in A location, I can join without problem using my account. When I try to join the ACS in location B to the same domain with the same account, it does not work.

  I looked for the ad client debugging logs and noticed that the ACS in location B goes to some a domain controller. However, I would have expected the ACS to contact a different DC, located on the same site that GBA... This does not happen.

  My question: how to determine what contact DC GBA? Is it possible to force HQ to reach by connecting a certain DC?

  Thanks for any help or ideas?

  IDA

  Hello

  Please check your sites and services in your DNS configuration to see if the right domain controllers are sent to the ACS when attempting to connect to the domain. This function is essential and allows to optimize the links that GBA chooses to join the domain.

  The way this works is that ACS is trying to resolve dns records for the global catalog servers and domain controllers for the dns server configured in the initial installation script. Then the dns makes a decision based on the source ip address of the dns request and think that the ACS is in a specific site and returns the result which domain controllers and global catalogs is configured in this specific site.

  Let me know if this helps.

  Tarik Admani
  * Please note the useful messages *.

• Can not join the domain of the Hyper-V virtualized system

  Hello!
  I have a domain controller active directory (adserver) in my ws12 network, and I have another physical server (server) also runs ws12 who is able to join the domain, but the virtualized systems can not.
  DNS and other settings are ok (identical to what is implemented on the server) and made the flush and registerdns steps. I even tried to add the host name of the dc and the name of FQDN for hosts files.
  I type in the domain (gczinege) and I'm able to type in the username and password. After awhile the virtualized pc SAIS: could not join the domain - not found network path
  I feel there is something with the installation of hyper-v or network server.

  Thank you all.
  I solved the problem, first I was promoting to a domain controller and to be in the area and that the installation of hyper-v after everything went well.
  Best regards.
  g

• Windows 8 and join a domain

  So I just got a windows machine 8 and want to join the field of society.  But now, I learned that I need Windows 8 pro.

  Should I spend the money on an upgrade to Windows 8 pro or 8.1 has the ability to join a domain?

  If so, should I pay for an upgrade to windows 8.1?

  Thank you

  Hello

  You cannot join a domain in Windows 8.1. You must have Windows 8.1 pro or Windows 8 Professional to join a domain. See the article for more on this topic.

  Compare editions Windows 8.1

  http://www.Microsoft.com/en-us/Windows/enterprise/products-and-technologies/Windows-8-1/compare/default.aspx

  You are always welcome in our community for all queries related to windows. We would be happy to help you.

• Unable to join the domain on VM

  Hello - I just installed Workstation 12 on a machine and try to understand networking. We use the network configuration connection bridged, that seems to work for most. I give a static IP address to the virtual machine and am able to ping this IP from other computers, but I'm unable to join this virtual machine to the domain. All our DNS settings are configured correctly on the virtual computer. The error indicates it does not find our dns server when attempting to join the domain. What I'm missing here? Must the virtual machine use the host's IP as gateway or DNS? Shouldn't if we in bridged mode right?

  Thanks for any help!

  This has been resolved. I had to make the switch port that the host computer has been connected to a trunk instead of an access port port.

• vMA unable to join the domain

  Hello

  
  

  I can't join the domain (windows-based).

  I want to join my vMA to the domain, but it is always the wrong password
  

  
  

  When I follow these steps on my vMA

  domainjoin-cli join < domain name > <-domain admin-user >

  
  

  He invites me authorization error so I tried with sudo

  
  

  VI-admin@VMA: sudo domainjoin-cli join < domain name > <-user-admin of the field: can I use to connect on my other computers >

  
  

  then he gives me a wrong password... my password is correct...

  I tried on two versions of vMA, 4.1 and 5.1/5.5
  

  any suggestions...
  

  Hey VirtualRay

  Your VMA has the same DNS settings in your area?

  So if you your vCenter Server ranging from ping vcenter01.mydomain.lan pings is returned correctly?

  If so, it should work

  1 from the vMA console, run the following command:

  sudo domainjoin-cli join

  2 when you are prompted, provide the password for the administrator of Active Directory.

  On successful authentication, the command adds vMA as a member of the domain. The command also adds entries in the file/etc/hosts with vmaHostname.domainname.

  3 restart vMA.

  Now you can add a target Active Directory at the VMAs. For the procedure to do this, see Add servers at VMAs targets.

  To check the settings of the domain of the vMA

  Since the vMA console, run the following command:

  sudo domainjoin-cli application

  The command displays the name of the domain for which vMA joined.

  :

• Join the domain with existing VM

  Hello

  How can I join a domain with existing virtual machines? We have a couple of VMs that we want to join a domain via the command (PowerCLI) file. etc name should stay as it is, only a domain join must be made.

  Thanks in advance.

  CU

  Rainer Friedrich

  You can try to create a new OSCustomizationSpec (New OSCustomizationSpec) with only the domain (domain, DomainUserName, DomainPassword) join.

  Then, apply the OSCustomizationSpec to the VM (s) with the Set-VM cmdlet (and the OSCustomizationSpec parameter).

• Script to join the domain, the role of configuration, add permissions and activate/SNMP configuration

  So I'm writing a script to install our vSphere hosts to work with our monitoring software.  Right now, it's all done by hand and I would like if possible to automate it.  So far, I came up with this.  I get to step 5 and that's where it fails.  I can get it manually run the Get-VIAccount command, but in the script, it fails.

  These are my steps

  1. connect to an existing host and retrieve role properties.

  2. connect to the new host

  3 join the domain.

  4. disconnect the new host and reconnect with the credentials of domain

  5. get the domain account, role of research/create and add permissions to host

  6. enable and configure SNMP

  7 restart MGMT officers.

  #Variables

  $vmhost = "Host03".

  $domaintojoin = "Domaine.org".

  $domainAlias = "domain".

  # $usernametograntpermissions = "service.account".

  $rolename = 'team - account control service '.

  #Connect to host17 to retrieve the role privileges

  to connect-viserver host17

  #Extract of privileges for the role of vcenter Monitoring Service

  $privsforrole = get-viprivilege-role (get-ferrule-name $rolename)

  Server VI #disconnect

  disconnect-viserver *-confirm: $false

  VSphere hosts #Connect above (enter the credentials of the root when prompted)

  SE connect-viserver-Server host03

  #Join field

  Get-vmhostauthentication - VMhost ctcvsphere3 | Game-VMHostAuthentication-domain $domaintojoin - user %-% - JoinDomain-confirm password password: $false

  credentials of the #disconnect root

  disconnect-viserver *-confirm: $false

  #reconnect with the credentials of domain

  SE connect-viserver-Server ctcvsphere3-user username-password password % domain\username

  #Get domain account and add to the host

  $viAccount = get-VIAccount-DOMAIN-User - ID service.account

  # Get the role

  $viRole = get-ferrule-name $roleName

  If (-not $viRole) {}

  throw the "Role of the creation.

  New-ferrule-name $rolename - Server $vmhost

  Together-ferrule-role (Get-ferrule-name $rolename - Server $vmhost) - AddPrivilege (get-VIPrivilege-id $privsforrole - Server $vmhost)

  }

  # Add permissions on VMHost

  New-VIPermission-Director $viAccount-role $viRole - entity $vmHost

  all VIServers #disconnect

  Disconnect-VIServer *-confirm: $false

  }

  #Configure SNMP

  Get-vmhostsnmp | set-vmhostsnmp-enabled: $true

  Get-vmhostsnmp | game-vmhostsnmp - ReadOnlyCommunity 'SNMP.

  #Restart Mgmt officers

  Get-VMHostService - VMHost $vmhost | where {$_.} Key - eq "vpxa"} | Restart-VMHostService - Confirm: $falese - ErrorAction SilentlyContinue

  Here is my error:

  Get-VIAccount: 27/02/2014-16:03:11 VIAccount Get A general system

  rror occurred: access to the directory error

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: NotSpecified: (:)) [Get-VIAccount], SystemError)

  + FullyQualifiedErrorId: Client20_VmHostServiceImpl_RetrieveUserGroups_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.PermissionManagement.GE

  tVIAccount

  Get-VIAccount: 27/02/2014-16:03:11 Get - VIAccount VIAccount with the id

  "service.account" was not found using the specified filters.

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: ObjectNotFound: (:)) [Get-VIAccount], VimExceptio)

  n

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.PermissionManagement.GetVIAccount

  New-VIPermission: Impossible to validate the argument on the parameter "principal." The argument

  ent is null or empty. Provide an argument that is not null or empty, and then try

  the command again.

  C:\ps1\vmware\snmp1.ps1:56 tank: 40

  + New-VIPermission-main < < < < $viAccount - $viRole - entity role

  y $vmHost

  + CategoryInfo: InvalidData: (:)) [new VIPermission], ParameterBi)

  ndingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.PermissionManagement.NewVIPermission

  The term 'catch' is not recognized as a cmdlet, function, script fi

  the, or an executable program. Check the spelling of the name, or if a path has been included

  DED, make sure the path is correct, and then try again.

  C:\ps1\vmware\snmp1.ps1:57 tank: 12

  + captures < < < < {}

  + CategoryInfo: ObjectNotFound: (catch: String) [], CommandNotFou

  ndException

  + FullyQualifiedErrorId: CommandNotFoundException

  Thanks in advance!

  Dimitar did a nice write-up of this phenomenon and a possible solution.

  See ESXi hosts to join a domain and licensing with PowerCLI

• VCenter 5.1 does not start after joining the domain

  I have a VCenter Server 5.1 that I had to join the domain. The domain controller has died and I had to rebuild the domain from the ground controller. It is early in the generation of the environment and the user does not backup turns yet. The SQL database is on another virtual machine which I added to the domain and at least I think I have fixed the AD accounts on the SQL Server. I ping the SQL server machine vcenter server. I also have a Web server that uses the SQL Server and it works correctly. All thought that the web server uses a SQL account and not a Windows account. Having said that it's the VCenter error I get. I don't know where I can get more detailed logs. VCenter service dies as soon as I try to start it.

  Here's the log of events

  Application error event ID 1000

  Name of the failing application: vpxd.exe, version: 5.1.0.35539, time stamp: 0x514d6239

  Name of the failed module: vmacore.dll, version: 5.1.0.35539, time stamp: 0x514d5992

  Exception code: 0xc0000005 fault offset: 0x00000000000022f7 failed process id: 0xbd0

  Start time of application vulnerabilities: 0x01cefb39789687d1

  The failing application path: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe

  Path of the failing module: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vmacore.dll

  Report ID: bf5595b0-672c-11e3-958d-000c2944f450

  Just rebuilt the VCenter server, was faster than to try to fix it.

• Unable to join the domain using customization comments vCD

  I have vCloud Director installed and running.  I created a vApp and edited the properties to allow customization of comments and more everything works so far but the computer will not join the domain.  I tried to use organization customization, as well as customize the TIME after deployment.  As soon as the server ends with the customization and is powered, I can log in and join the domain manually without any problem, I can't get comments customization to do that for me.   Its a Windows 2008 R2 server.  I found this entry at the end of the journal to customize-comments on the server:

  run the command netsh interface ip set dns 12 xxx.xxx.xxx.xxx static (it has the correct address for my DNS server) =

  The command has been successfully run, the output of the command:

  The configured DNS server is incorrect or does not exist

  Any thoughts?

  It is a farily well known problem.  For a join of field works in vCloud Director, you must have on your DHCP subnet.  Many people make using the vShield edge device that is located on the network of the Org.  The sysprep process runs before tools VMware is running (which applies to the satic IP address to the client).  It's sort of a situation or hen that the guest has ip when in sysprep, so the easy solution to make it work is DHCP.  Conversely, people did it is in port, a lab post script custization in vCD Manager who entered the field after the sysprep is made completely and the guest it's static IP.  Frankly, it's something of the order of operations that is causing the problem.  We are looking at this for other clients, but at the moment, what your options are

  (1) add DHCP to the subnet by using your own server DHCP OR vShield Edge

  (2) add a PostScript of customization to join the domain, it can be inserted into the comments thus customizaion area.

  Hope this helps you stop banging their heads on the wall

• Discover the State of the agent (18) composer initialization error: could not join the domain (expected 815 seconds)

  Hi all

  My Active Directory, View Manager, composer and vmware vcenter are all on windows 2008 R2.

  I took a spanshot of Windows XP SP3 with DHCP setting, installed vmware tools, see agent installed, firewall disabled, the Member of domain etc.

  When I tried to clone the snapshot XP to several XPs with the pool creation process it get error in personalization with error, below

  *03/10/10 18:01:49 IST: View Composer agent State (18) initialization error: could not join the domain (expected 815 seconds)*.

  Help, please.

  Thank you

  Selim Desai

  VCP410

  Take a look at http://communities.vmware.com/message/1613937

  the solution has been http://support.microsoft.com/kb/944043/en-us

  André