Join the ESXi server to the advantage of the AD domain?

Similar Questions

• Impossible to join a 2nd Server as a 2nd DC to a domain

  Hello world

  Thanks in advance for your help.

  I would like to set up a test lab, so I can experience on the upgrade of the area from 2003 to 2008 by adding a Server 2008 in a new remote site.

  Now I install a current version of VMWare Server (esx, not). I installed my first new domain controller for a new first domain on the server to the virtual machine. 'S called it Takami.com and DC installation with 192.168.1.2/24. The type of network to the virtual client is 'the bridge' - as some have suggested that NAT and HostOnly.

  DNS and WINS are also configured on the first domain controller. No errors, dns is good.

  Now I tried to add a domain controller 2003 2nd with ip 192.168.1.3 on the same server vm. But now he told me that he cannot join the domain. He told me the RPC server is unavailable and asked me to check section 5171.

  On the two server, they could ping each other, front and rear. Also, I tried to ping the domain of the server 2 takami. HE could he ping too!

  So what else do I need? Both servers are running with SP2.

  I hope you can help... Thanks a lot again!

  Takami Chiro

  With the exception of the DNS configuration on test-dc1, I don't see anything that you may have missed.

  Instead of 127.0.0.1, I would use the real IP for DNS (192.168.1.2).

  André

  Forum upgrade notice:

  VMware will be upgrading systems VMware communities between December 10-12, 2010. During this time, the system will be placed in READ ONLY mode.

• Unable to join the computer Windows 7 the Windows Server 2008 R2 domain

  I'm at a complete loss here. I don't know if its something to do with this specific machine, or if something has changed on the side things server.

  A little history:

  I have joined two other machines to the domain about 3 weeks.

  Meanwhile, a machine has been infected by a ransomware. We completely removed all traces of infection of the machine network drives and mapped the proxy infected. The infected machine is used as a pointer for direct research. Could something have changed within the machine itself? Should I remove it?

  We have restored the mapped via a stored backup files.

  I do not know if somehow widespread infection among the mapped drives to records of service on the server itself change something along the way.

  Help would be greatly appreciated.

  Here is the NetSetup.LOG information.

  10/22/2015 09:45:33:892 -----------------------------------------------------------------

  22/10/2015 09:45:33:892 NetpValidateName: checking to see if 'redacted' is valid as type 3 name

  22/10/2015 09:45:33:992 NetpCheckDomainNameIsValid [Exists] for 'Redacted' returned 0x0

  22/10/2015 09:45:33:992 NetpValidateName: name 'Redacted' is valid for type 3

  10/22/2015 09:45:41:941 -----------------------------------------------------------------

  22/10/2015 09:45:41:941 NetpDoDomainJoin

  22/10/2015 09:45:41:941 NetpMachineValidToJoin: 'DOCTOR1-PC.

  22/10/2015 09:45:41:941 OS Version: 6.1

  22/10/2015 09:45:41:941 Build number: 7601 (7601.win7sp1_gdr.150928 - 1507)

  22/10/2015 09:45:41:941 Service Pack: Service Pack 1

  22/10/2015 09:45:41:941 SKU: Windows 7 Professional

  22/10/2015 09:45:41:941 NetpDomainJoinLicensingCheck: ulLicenseValue = 1, status: 0x0

  22/10/2015 09:45:41:941 NetpGetLsaPrimaryDomain: status: 0x0

  22/10/2015 09:45:41:941 NetpMachineValidToJoin: status: 0x0

  22/10/2015 09:45:41:941 NetpJoinDomain

  22/10/2015 09:45:41:941 Machine: DOCTOR1-PC

  22/10/2015 09:45:41:941 area: redacted

  22/10/2015 09:45:41:941 MachineAccountOU: (NULL)

  22/10/2015 09:45:41:941 account: Redacted\Doctor1

  22/10/2015 09:45:41:941 Options: 0 x 23

  22/10/2015 09:45:41:941 NetpLoadParameters: loading of registry settings...

  22/10/2015 09:45:41:941 NetpLoadParameters: DNSNameResolutionRequired not found, a default value of 0 x 2 '1'

  22/10/2015 09:45:41:941 NetpLoadParameters: DomainCompatibilityMode not found, defaulting to '0' 0 x 2

  22/10/2015 09:45:41:941 NetpLoadParameters: status: 0x2

  22/10/2015 09:45:41:941 NetpValidateName: checking to see if 'redacted' is valid as type 3 name

  22/10/2015 09:45:42:046 NetpCheckDomainNameIsValid [Exists] for 'Redacted' returned 0x0

  22/10/2015 09:45:42:046 NetpValidateName: name 'Redacted' is valid for type 3

  22/10/2015 09:45:42:046 NetpDsGetDcName: trying to find DC in domain 'Redacted', flags: 0 x 40001010

  22/10/2015 09:45:57:046 NetpLoadParameters: loading of registry settings...

  22/10/2015 09:45:57:046 NetpLoadParameters: DNSNameResolutionRequired not found, a default value of 0 x 2 '1'

  22/10/2015 09:45:57:046 NetpLoadParameters: DomainCompatibilityMode not found, defaulting to '0' 0 x 2

  22/10/2015 09:45:57:046 NetpLoadParameters: status: 0x2

  22/10/2015 09:45:57:046 NetpDsGetDcName: status check name resolution from the DNS A record for "Server1": 0x232b

  22/10/2015 09:45:57:046 NetpDsGetDcName: could not find a domain controller for the specified domain: 0xa8b, last error is 0 x 0

  22/10/2015 09:45:57:046 NetpJoinDomainOnDs: NetpDsGetDcName returned: 0xa8b

  22/10/2015 09:45:57:046 NetpJoinDomainOnDs: function exits with status of: 0xa8b

  22/10/2015 09:45:57:046 NetpDoDomainJoin: status: 0xa8b

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to count the number of virtual machines on an ESXi server via command line

  I want to know the number of virtual machines running on ESXi. What is the command so that it...?

  "vim - cmd vmsvc/getallvms"

  This order list of the early running of the ESXi Server virtual machine, but I want the number (integer)

  Help, please...

  Thank you

  M@RK! V

  Hello

  You can use the PowerCLI command to get a VM number:

  SE connect-VIServer-Server "ESXi host or vCenter server.

  (Get-VM-location 'ESXi host') .count

  Elodie

• How to install and update the vm on linux systems tools and how to join an esxi host in domain

  How to install and update the vm on linux systems tools and how to join an esxi host in domain

  thanq very much boss

• Nested inside the ESXi Server ESXi

  Nested run ESXi in ESXi server.

  I can't turn on the virtual machine for Vcenter, I get an error "this host does not support Intel VT - x. Here's my server BIOS settings.

  Is there a solution for this?

  
  

  See attached screenshot.

  
  

  My server is running an Intel Xeon processor E5540 Proliant DL380 G6 2 x Xeon Quad-Core 2.53 GHz

  
  

  Physical server Bios settings

  -Intel(r) Hyperthreading Options-> active

  -Intel(r) Turbo Boost Technology-> active

  -Intel VT - d-> active

  Your hardware supports nested ESXi.  Is that you checked the box next to "Hardware-assisted virtualization expose to the guest operating system" on the settings of the processor in the web client?

• How to generate the array Diagnostic Utility ADU for Esxi server

  How to run Diagnostic Utility ADU or HP Insight Diagnostics HP Insight Diagnostics table to collect the status tables and logs data FRO an Esxi Server

  How to generate the array Diagnostic Utility ADU for Esxi server

  Example:

  Download the package .vib here: http://vibsdepot.hp.com/hpq/feb2013/esxi-5x-vibs/hpacucli/hpacucli-9.40-12.0.vib

  and place it on a store of data seen by the host...

  Install it using the CLI:

  software esxcli vib install d vmfs/volumes //hpacucli-9.40-12.0.vib

  Now run it:

  ~ # cd/opt/hp/hpacucli/bin

  / opt/HP/hpacucli/bin # . / hpacucli

  HP Array Configuration Utility CLI 9.40.12.0

  Detection of controllers... Fact.

  Type 'help' for a list of supported commands.

  Type "exit" to close the console.

  => ctrl all diag file=/tmp/my_ADUreport.zip ris = on = on zip xml = on

  Generation of diagnostic report... done

  -Online output

  / opt/HP/hpacucli/bin #.

  my_ADUreport.zip in / tmp can now be downloaded from the host...

  It could be that useful...

  / Rubeck

• Update the Bios ESXi server

  I use 5.1 ESXi and I want to upgrade the BIOS on the server. I downloaded the dell BIN file and place it in a tmp folder in the ESXi server. How can I install this bin file in the server? Can what commands I use to do it?

  Thank you

  Benito

  You won't be able to go in ESXi. See http://communities.vmware.com/people/vmroyale/blog/2010/12/29/how-to-install-vendor-updates-on-server-hardware-running-esxi for a set of instructions, that you can use.

• workstion 8 - cannot install 64-bit on the esxi Server vm

  I installed VMWARE WORKSTION 8.2 on my system after I installed Win7 64-bit.

  Then, I installed the server ESXI WORKSTION Version 5 469 512 on VMWARE WORKSTATION

  Now I'm running the server via VSPHERE CLIENT 5.

  Whenever I try to install a virtual system on the ESXI 64-bit version, it gives an error that the system is not supported and I can only use it for information.

  If I install the 64-bit version of virtual on my computer without problem systems, why I can not install on the ESXI SERVER ?

  Change the settings for the virtual machine for the VM ESXi.  On the processors tab, check the box next to 'Virtualiser VT-x/EPT or AMD-V/IVR.'  If your hardware supports this feature, you will be able to run embedded 64-bit clients.  For more information, see nested running VMs.

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Export the VM of ESXi to 'not connected' ESXi Server using converter

  Hi all

  Sorry for the newbie question - I've seen a lot of messages about the export of a machine virtual workstation or player, etc, but I couldn't find one for my purpose.

  We need to export a virtual machine that was created on a server ESXi Server ESXi in another place that has no network connectivity between them using the converter v 4.01 Standalone (?). The idea is the following: export image, copy the files on USB key, send to a remote site, they will import image on their server ESXi (same version).

  What is the best way for me to do using the converter?  I thought that I could simply select the VMWare Infrastructure Server as a destination, but that seems to be an option only if you have the remote a plugged into the network.

  Does anyone have suggestions as to the export type that may possibly be more coherent than the others? That is to say; export as "vmware workstation or another vmware virtual machine" say vs "virtual appliance"?  Are just as reliable a prospect of import export and then?

  Thanks in advance!

  D

  If the two ESXi is the same version that you can do is go to the browser data store and download all the VMS in the USB drive and then go to Site 2 and upload is via the browser of data store. Browser for the .vmx and save the virtual machine.

  If you still want to use vmware converter to format of workstation converter so that the destination can be selected as USB key, then a workstation to vmware infrastructure in Site 2.

• What are the methods to ESXi upgrade with 1 single ESXi Server?

  The server requires her to get any update through the update maintenance Manager or VMA is not possible that both run on the ESXi server.

  What options are left during a server ESXi 4.0 to ESXi 4.1? I can think of root direct-ssh access and the 'host Update Utiliy', even if that fails with errors.

  You must use the vCLI, then update the host vihostupdate.pl. Page 55 @ http://www.vmware.com/pdf/vsphere4/r41/vsp_41_upgrade_guide.pdf

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Unable to connect via the Internet to my ESXi server. Help, please

  Hi, I had a server ESXi 4.1 at home. When I try to connect via the Internet, it is not working.

  I put ESXi server to firewall and still, I can't ping my server even.

  No idea why?

  Kind regards

  Pawel Lenart

  Sit behind your firewall router esxi, transfer 443 to esxi management IP and ensure that management network vmkernel has the internal IP address of router as its default gateway.

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• How to reset the ESXi Server?

  Hello

  We have two servers ESXi in vCenter, a ESXi server running a VM to openfiler that shares the data store local as iSCSI target that is mounted by the two server ESXi, for some reason any ESXi and vCenter no longer meets, and after connect you in ESXi via ssh, command df stuck, I suspect that they lost connection to openfiler web interface works always (said status current user 0).

  I'll reset ESXi servers? I tried to restart command, also stuck.

  Thank you

  William

  You could try to restart with the option - f.   Or services.sh restart to see if it shakes things upward.  Something in particular by logging in var/log/messages?

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• LM arrive at the same ESXi server on which it is installed?

  Greetings,

  This is my first post and I am new to VMware, so go easy on me. The question is quite simple. Is it possible to Lab Manager

  to manage the ESXi server which is hosted on? It is a recommended solution, this does not create a circular dependency?

  See you soon,.

  Paul

  Yes it can. The Manager server laboratory in our environment of race on a virtual computer on the cluster manager of laboratory. Everything such as running a vcenter here (where our tracks)

  http://www.vmwareadmins.com

  http://www.vmwarescripting.com