Unable to join the computer Windows 7 the Windows Server 2008 R2 domain

Similar Questions

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• Authorized access to a Windows Server 2008 R2 domain

  I set up my small office (about 20 computers) on server 2008R2 and created a domain.  Most desktop computers still use XPpro and I have a few 7 on now.  Most of the connections do not have administrative permissions and now whenever they need a new update of Java (for example) I have for them disconnect, connect, do the update, then close the session and then reopen in a them.

  How can I configure systems so they don't have to logoff, but will be just asked to put in access allowed to continue the update / install?  It would be much easier for them to call me on and I just put in my information and get back to what I was doing.

  Thanks for the help in advance,
  Joe

  Hello

  These XP Forums are mainly for general questions about the use of XP for home use.

  You have a Server 2008 R2 Forums for your questions.

  Here is the link to them:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• We have DHCP role configured on the Windows Server 2008 added domain controller but we receive errors.

  We have DHCP role configured on adding Domain Controller(OS: Windows2008 R2). On the same, we get the error in the below event viewer.
  The name "domain name: 1 d" could not be registered on the interface with the IP . The computer with the IP did not allow the name to be claimed by this machine.

  Hello

  The question you have posted is related to the Windows 2008 Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

• Exchange 2007 on windows server 2008

  I work in the company, there is windows server 2008 with domain name, dns, dhcp is configured. now I want to install exchange 2007 in another windows 2008 Server, so please expose me to properly install and configuration...

  Hi Alavi,

  For more specialist on this question help, post your request here

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• ACS any Version with Windows Server 2008 R2 64-bit domain controller

  Hi all

  Is there any version of ACS is currently working with Windows Server 2008 R2 domain controllers?

  Our server controls has recently upgraded domain controllers to 2008r2 and off 2003 servers. This did not our ACS 4.1.4 really happy.

  I read now serveral messages about problems with the ACS and Server 2008r2 and hope to find a solution (not to mention that switching to LDAP, yukk).

  Thank you

  Pato

  ACS currently cannot be installed on a server running Windows 2008 R2.

  As an alternative, you can install ACS on a member server.  Authentication

  ACS uses the local machine net API authentication both compared to a 2008

  R2 domain will work.  The Remote Agent can also be installed on a 2008 R2

  Server if you use devices.

  If you install ACS on a member instead server here is how to configure services

  to authenticate properly with the domain:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/installation/guide/Windows/postin.html#wp1041304

  -Jesse

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Unable to see the Favorites menu when opening my computer in Windows server 2008 R2

  Original title: Favorites Menu

  Hello

  I'm not able to see the Favorites menu when I open my computer in Windows server 2008 R2.

  In Windows server 2003, I used to see the Favorites, I saved in Internet Explorer.

  Help, please.

  Hi Rochdi_carlos,

  Because the question you posted is related to the Favorites menu in Windows server 2008 R2, it would be better suited in the Technet forum. Please post your question in the following TechNet forum to get help:

  http://social.technet.Microsoft.com/forums/en/category/InternetExplorer

• Unable to join the homegroup on new Inspiron 15 5559

  I had a residential group put in place for a good while on 3 computers desktop and an old Tower, but my new laptop Dell Inspiron 15 5559 with 10 Windows fails to reach.  I get to the point of putting in the right password and clicking NEXT, then the bar keeps of moving from left to right for several minutes, then stops without any messages and not to join.

  Here are the details.  Computer of One Office (a Dell Inspiron 630 with Windows 7 Pro), a former HP with Windows Pro 10 office, an old house built office with Windows 10 Pro (64-bit), and an old Toshiba laptop with 64 bit Windows 7 Home.  All these joined the homegroup very well.  In addition to the homegroup, I have the file & printer sharing power with 4 of them.  On the Dell desktop computer, I have 9 folders and two shared printers.  The new laptop Dell can access shared folders, it is just unable to join the homegroup.  I created the homegroup because I had problems to access 2 shared printers (a Canon IP1600 inkjet and laser Samsung ML-2525) with 10 windows, in case you're wondering why I'm not just with the file & printer sharing instead of homegroup.

  In any case the key is that everything on this new Dell laptop works fine except that I can not join the homegroup, and I'm very curious as to why not.  I did full virus scans with Defender and Norton 360 and have done two scans with MalwareBytes, but no malware has been found.  I also ran "SFC/scannow" and it found no problem either.  I checked to make sure that I put in the security key for the homegroup, and at this point, I am triple ideas.  It please does not restore to the factory settings, because I had this problem since the first day that I got this laptop out of the box before I did any customization. FWIW, I'm no novice in computer science.

  What suggest you?  TIA

  Yesterday I posted a note that I would have found and solved the problem.  I don't know what happened to this post.  The problem was that there was a popup that was actually a pop-under hidden behind a number of open windows.  He said that there was an invalid password.  Of course the note that I had used to set up 4 PCs had a "n" where there is now a "m".  I would like to say that this has changed from n to m somehow otherwise I don't know how I was able to put in place the other 4 PCs.  Anyhoo, the problem is now resolved.

• px12-350r unable to join the domain - what now?

  Hi all!

  I hope you can give me some advice because at the moment I'm in a really silly situation, being probably locked out of my Iomega px12-350r.

  Here is what happened:

  * The device was successfully linked to my domain name Microsoft AD and worked with this config at least a year.

  * I expanded the storage matrix, 2 days adding 2 drives. Everything went well and the end of the expansion, the new total disk space is displayed correctly in the web administration interface.

  * After this, I restarted the device. After the reboot, I couldn't connect to the device more using my domain account. This account had administrative rights on the NAS and I connected on the NAS using this account before.

  * I don't alter the domain infrastructure.

  * I know that the device cannot join the domain more because I enabled e-mail notifications and he continues to send me "unable to join the domain".

  I have already tried:

  * Connection using the usual accounts: doesn't seem to work once the device is connected to a domain.

  * Connection via SSH. Does not work, probably for the same reason as above.

  I wasn't yet:

  * The user manual mentions reset the admin password by pressing the reset on the back button. But this will only reset config (I'd be okay with it), or it will erase the data on the drives as well?

  I'm from the Germany. Despite having purchased a service plan 24 x 7 hotline support German will only redirect me to the hotline American which claim to do only office, no SIN px12. I'm kinda in the middle of nowhere now. ;-)

  Thanks for your help!

  Best regards

  Florian

  Hi André,.

  I fixed it without reboot - by chance.

  In a desperate attempt, I tried to connect using the domain administrator account - and it worked! I don't remember giving any px12 admin permissions to this user and I certainly don't connect to the device using this user before. But the account has permissions to create computer accounts in the ad, and in the moment when I logged in the computer account of the AD px12 updated password.

  I tell myself that the px12 has used the account admin for re - joining the domain. From the web interface, I could now do a sync AD and after that, all users of domain reworked.

  So, if anyone has the same problem, try connecting the device with any account that has administrative rights on the whole of the field, even if you have not used the account on the device before. It can work for you, too.

  Local accounts still do not work. I think that if the device is connected to a domain and the domain link is broken permanently, so it's only the reset button.

  Andrew Merci for your support!

  Best regards

  Florian

• Unable to validate a way out of trust on either of the two domains using Windows Server 2008 R2

  I have two domain controllers in the two different forests.  Both have a Stub dns setup for each other and can ping both the field and the name of dc for eachother.  Domain1 build outgoing approval and validate successfully.  Domain2 see confidence applied, however any attempt to validate this trust or build from the Wizard ends with only 2 domain cannot locate the domain controller for Domain1.  What can be done to allow Domain2 validate this trust?

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Unable to connect to the server under any account except in safe mode - Windows Server 2008 R2 Standard.

  My Windows Server 2008 R2 does not all connect directly to the server - level of the console or via the desktop remotely.  The symptom is that Active Directory is not running.  I tried to connect computers MacBook with OS X (10.5) to active directory.  I can log on to your desktop and see all the network shares, so all users seem to work OK - performance is slower than usual.  Logging indicates the user ID or password is not valid, but they are working on the jobs or when we book in safe mode.  DCDiag does not work because it cannot log in with credentials.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to configure the mode of kiosh for thin clients on windows server 2008

  I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.

  I'll have another group that more access is needed.

  Kiosk.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• VHD for evaluation of Windows Server 2008 R2 not accepting not a password on the Microsoft Web site

  Hello

  I recently downloaded and installed Windows Server 2008 R2 evaluation VHD on my Hyper-V using the link below.

  Title: Windows Server 2008 R2 Evaluation VHD for Hyper-V Images (180 days)

   

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16572

  However, every time I get the username and password as "Admin" & Pass@word1 mentioned in step 12, in accordance with the instructions, that I get the error message below.

  "The user name or password is incorrect"

  My data from the computer

  Operating system: Windows 8 Pro

  The use of Hyper-V

  Can someone help me?

  Hello

  The issue of Windows is more complex than what is generally answered in the Microsoft Community Forums. Appropriate in the TechNet Forums. Please post your question in the TechNet Forums.

  You can check the link to post your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

  I hope that helps!

• Auto, judgment of 10 days after installation for the Windows Server 2008 R2 evaluation version

  Hello

  I downloaded and installed the Windows Server 2008 R2 evaluation version. Initially. It seems to work perfectly. According to Microsoft, the trial period is 180 days. However, ten days after the installationt (10 days for activation), the system began to stop automatically every half hour.

  For events, file system log event ID is 1074.

  The information for this event are below.

  The wlms.exe process has launched the power off computer Win2k8R2-1 (server name) for the NT AUTHORITY\SYSTEM account for the following reason:

  Other (unplanned)

  Reason code: 0x0

  Stop type: power off

  Please help solve this crucial problem.

  Best regards

  John Zhang

  John,

  For assistance, please ask for help in the appropriate Microsoft TechNet Windows Server Forum.
  
  Thank you & good luck.