Journal inisght - question content pack SQL

Similar Questions

• SharePoint content pack question

  Hello

  I'm actually setting up the SharePoint content pack, and I can't find the SPServerName.txt file in the scripts folder.  I have to edit this file to enter the name of the database server SharePoint.

  I downloaded the pack of content on the market but this file is not found.  I just can it create?

  Thank you.

  Yes you can just create it. Product market has a limit that we can not attach more than just the file content (PMLV) Unfortunately, pack you will need to download scripts, techniques and other vouchers via the exchange of the solution. I hope this helps. I've also attached the file here incase you need it.

• Log Insight publishing WorkFlow content Pack

  I used the Insight newspaper publisher to publish the contents of the pack. End of the publication, he gave me the ID (48ab-32556) and identification of email to contact for any other question.  However, I have got any e-mail communication to confirm the request for publication is received. I sent e-mail to [email protected] to check, have heard support either. So I wanted to make sure that I followed the right workflow for publishing new content pack.

  In one of the doc of LI he says link exchange solution allows you to publish, I did ' t find the option on the web link even after the connection.

  Any idea here would be appreciated. Thanks in advance

  Hello

  Looks like the editor has bug, I don't see any pack of content uploaded on the ftp site. If it is not a lot of trouble may ask you to zip the content pack and send to [email protected] alias?

  You can post on Exchange Solution only review and approval of the Insight CORD journal team.

  The process is explained in this document - Creation of content in vRealize newspaper Insight 2.5 Packs (also available on the Insight Community newspaper Documents tab)

  I look forward to the content in the e-mail pack, will review and get back to you. However, please note that most CORD team members are on leave week next because of Thanksgiving.

  Thank you.

• Wave error when you try to install a content pack

  I use Log Insight in a test environment and am unable to install content packs at all. I wish I could use Log Insight for business center and Application Services, but when I try to install their (or any other content package) on the market I have these unnecessary errors:

  

  I also tried to download packs of content from a browser and their importation, but that results in the same error. The role of my account is "Super Admin" so I don't think that is the question.

  Two suggestions:

  1.) Confirm synchronization time between * nodes ALL * LI * AND * between the client browser and the server of LI - if the time is not synchronized, it can lead to this error.

  2.) reboot the LI/cluster of nodes and try again

• Brocade SAN Content Pack Setup

  I imported the content pack Brocade SAN into our insight of 1.5 log device. The SAN admin configure the redirection of syslog server network to advise to the switches through the IP address and port 514.

  After more than 24 hours, no data appears preview newspaper under the Brocade SAN dashboards.

  Is there another step, I'm missing? The documentation is sparse on this product.

  I thought about restarting the insight journal unit, but a warning appears on the hosts not being able to continue logging after loss of connection with the device, so I wanted to do only if absolutely necessary.

  Thank you

  Would you believe said SAN admin typed in the wrong IP address of the insight journal device? problem solved. human error.

  Thank you

• having problems with dreamscene content packs

  I'm under Acer E380 with Windows Vista Ultimate, I bought later.  I tried to use Windows Update to download DreamScene Content Pack and #3.  These has failed with the error code of 807000D.  I have reviewed this code under Vista, but impossible to find an idea of what to do.

  I tried RegDefense and Dr. Fix It and still it does not load upwards I think I need to format the drive and try to reaload Vista.

  wjchagen,
  The first thing I would say is to download the update to your desktop and then install it from there.  This can help if there is a problem with the file does not download properly before trying to install.  Also if you run a firewall\antivirus program you can disable it if you download the file.  Sure, just that reactivate you.

  Try this and lets us know how it goes. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Content pack for MS Exchange scripts

  Hello

  I am currently installing and configuring the MS Exchange content pack on a server of Log Insight 3.0.

  I did the SMTP configuration on the Exchange Server, but I can't end the scripts that I have to copy it to the Exchange Server, as it says in the installation instructions:

  "Script ".
  

  Copy the scripts from the root directory of the archive downloaded Solution Exchange to its final location. "For example: C:\ProgramData\VMware\Log Insight Agent\exchange\"

  
  

  Where can I find these scripts?

  
  

  Thank you.
  

  Hello

  If you install the product content pack, you will only get the pack content and without supporting documents unfortunately file due to a limitation of the product. However, if download you it from the exchange solutions, then you should get a zip file containing the content as well as all documents supporting documents and scripts pack.

  Management of the clouds market | Solution Exchange

  Thank you

  -Jean-Marc.

• AD and Windows content Packs

  I am using two of these content packs at the same time. I have the windows agent installed on all my domain controllers. However, the default widgets do not display data in my Windows content pack. They appear in the 'Presentation of security' section of the AD content pack. I can view the logs in the Interactive analysis, but they are not automatically placed under widgets.

  I noticed this warning for two content packs.

  Important: the following Insight Log agent configuration is required for this content pack work:

  Add the required tag ms_product following in the liagent.ini file to get results in thewidgets.
  Tags = {'ms_product': 'Active Directory'}

  
  

  Important : The following Insight Log agent configuration is required for this content pack work:

  Add the required tag ms_product following in the liagent.ini file to get results in widgets-

  Tags = {'ms_product': 'windows'}

  
  

  How am I supposed to put this tag in my liagent.ini file? I'm not sure of the correct syntax. I'm also not sure how to use two of these tags on the agent as duplicates are not allowed.

  
  

  Any help would be appreciated.

  Hmm, I think you're misunderstanding. Two content packs can and should be used at the same time. Each content pack requires a different agent configuration. Looks like you want to use Windows and Active Directory content on the same domain controller packs, right? If so, you need to use the TWO configurations on the agent on the domain controller. This means that the liagent.ini and add the following (and then two content packs will work - I hope this helps!):

  [winlog |] Request]
  Channel = Application
  Tags = {'ms_product': 'windows'}

  [winlog |] Security]
  Channel = security
  Tags = {'ms_product': 'windows'}

  [winlog |] System]
  Channel = System
  Tags = {'ms_product': 'windows'}

  [winlog |] DirectoryService]
  Channel = Directory Service
  Tags = {'ms_product': 'Active Directory'}
  

  [winlog |] DNS_Server]
  Channel = DNS server
  Tags = {'ms_product': 'Active Directory'}
  

  [winlog |] DFS_Replication]
  Channel = the DFS replication
  Tags = {'ms_product': 'Active Directory'}

  
  

• LogInsight and view Horizon content Pack

  Hello

  I downloaded the Horizon view content Pack and have seen pointing to our instance of LogInsight.

  I see a lot of data analytics Interactive to see, but nothing through the content Pack.

  Is there a configuration additional post the content Pack download, for example the installation of the Agent on servers view?

  Thank you

  Richard.

  Hello

  Missed the extra details in the CLoud market place!

  Sorted.

  Richard.

• vCAC6 content Pack installation instructions

  I try to install the vCAC Log Insight Content Pack and tried to download the "vCAC 6.0 Content Pack for installation of Insight Log"document.  He asks me to register, I already did.  This is more than a day and I'm not able to receive the activation e-mail to activate the download of this document.  I wonder if someone has the same problem?  Or, better yet, maybe make the document public?

  Hey Rick, requests for Exchange of the Solution must be processed within three business days. The document is just a formalization of this blog so feel free to make reference to it in the meantime: vCAC logging to remote & #124; SFlanders.net

• Content Pack: Bar color graphic Tags & enable & E-mail JSON for alerts

  Hello

  I am writing a content pack. I am facing following issues. Can someone help me how to solve or provide the link to the documentation to write the contents of the pack.

  #1 I want to make different colors for the different gravity events such as errors in the red bar in the graph. How to provide this JSON file.

  #2 by default alerts are in disable mode, I would like to know the "JSON" parameter to activate the alert.

  #3 How to deliver mail to report id in the JSON file?

  Murali

  #1 I want to make different colors for the different gravity events such as errors in the red bar in the graph. How to provide this JSON file.

  It is not possible today. That you is impossible to graphics in the web user interface. We are considering this for a future version.

  #2 by default alerts are in disable mode, I would like to know the "JSON" parameter to activate the alert.

  It is not possible today. Content packs are supposed to be generic, so they can be applied to any instance of Log Insight. Alerts can be configured with either an address of electronic mail or via vCenter operations. Two of these types of alerts will be specific to a particular environment. To activate an alert, you must specify an email address or vCenter information Operations (once again not possible the content pack)

  #3 How to deliver mail to report id in the JSON file?

  Same as #2 - is not possible.

• NetApp Insight Journal content packs

  Guys,

  I installed the insight journal, and my virtual centres taking data and install vcops. I installed the content to netapp pack, but it doesn't seem to be bringing in my controllers of netapp data. Y at - there a step I'm missing or additional configuration?

  Thank you

  Ryan

  The content of NetApp pack requires ONTAP cluster. If you don't see any data being filled, then I assume that you are running the legacy version. If you want that NetApp to build a content for legacy mode pack then leave a comment on the content of NetApp pack to the Exchange Solution.

• Question newbie Oracle SQL adding columns to count the contents of the other columns

  Greetings,

  I do not understand how to integrate charges to my current SQL code that would consist of food and then the elements of the car for each person. Once I understood this concept I want to apply to my real data base (Oracle) where I count medication and problems for each patient.

  Using my data of test below, for example the My goal would be to have the number of columns show that Cathy had County 3 foods and an element 1 cars (the County would need to ignore the values zero in these columns). I really don't like if the counter value is repeated in every row for that person.

  Select data1. Name, data1. Category, Data1.Results,

  Box When data1. IN category ("food") then end FOOD data1.results,

  Box When data1. IN category ('Cars') then data1. Results end of CARS

  Of

  (

  Select T1.name name, category null, null results in a_Main T1, a_Food T2 where T1.cpi_seq = T2. CPI_SEQ

  UNION

  Select T1.name, 'food', T2. Food a_Main T1, a_Food T2 where T1.cpi_seq = T2. CPI_SEQ

  UNION

  Select T1.name, 'cars', T3. Cars a_Main T1, a_Cars T3 where T1.cpi_seq = T3. CPI_SEQ

  ) data1

  where data1. Category is not null

  by name, category

  Name	Category	Results	FOOD	CARS
  Cathy	cars	Fiero	NULL VALUE	Fiero
  Cathy	food	Soaking of the points	Soaking of the points	NULL VALUE
  Cathy	food	Scoop	Scoop	NULL VALUE
  Cathy	food	SoftServe	SoftServe	NULL VALUE
  Dave	cars	Firebird	NULL VALUE	Firebird
  Dave	cars	Gremlin	NULL VALUE	Gremlin
  Dave	cars	Transport	NULL VALUE	Transport
  Dave	cars	Vega	NULL VALUE	Vega
  Dave	food	Count Chocula	Count Chocula	NULL VALUE
  Dave	food	Donuts	Donuts	NULL VALUE
  Dave	food	Little retarded	Little retarded	NULL VALUE
  Dave	food	Pizza	Pizza	NULL VALUE
  Mary	cars	Taurus	NULL VALUE	Taurus
  Mary	food	Bird seed	Bird seed	NULL VALUE
  Mike	cars	Honda	NULL VALUE	Honda
  Mike	cars	Jeep	NULL VALUE	Jeep
  Mike	food	Burger	Burger	NULL VALUE
  Mike	food	Fries	Fries	NULL VALUE
  Mike	food	Foam	Foam	NULL VALUE
  Sue	cars	Pinto	NULL VALUE	Pinto
  Sue	cars	Taurus	NULL VALUE	Taurus
  Sue	food	Humus	Humus	NULL VALUE
  Sue	food	Kabooli	Kabooli	NULL VALUE

  Select data1. Name, data1. Category, Data1.Results,

  Box When data1. IN category ("food") then end FOOD data1.results,

  Box When data1. IN category ('Cars') then data1. Results end of CARS,

  Count (*) over (partition t1.name, data1. NTC category),

  Of

  (

  Another way would be

  Select

  ..

  de)

  all

  )

  Group

  name

  Category

  order by

  name

  Category

  Depends on your needs (for example, the final projection).

• See questions based on SQL.

  Hi once again, everything

  I use Jdev 12.1.3. I have a SQL view opposed based on a rather complex SQL query in my ADF application.

  This query has 5 parameters for which I created 5 bind variables.

  (A) Comment can I fill these variables programmatically? I would like to take the information by other objects of my page (tables and forms). I have more or less clear how get the information of these objects, but not how to fill in the query parameters, and then how to run to update the ADF table which shows the contents of the SQL view.

  (B) what is the best approach to automatically refresh this display object (table ADF)? In my page I have several tables cascading which are automatically updated thanks to their combination of keys etra (and set the behavior of the waterfall on the AppModule), but I don't know how to get similar behavior on my table in sql view. Let's say I can handle encapsulate the code to update my opinion in a method of bean (with the answer of A question), could I call this method from a few listener? I first of all on the selectionrowlistener, but my paintings have this listener already 'occupied' by the default.

  Thanks for your help, sorry if I'm not quite clear on the description of my problem, I'm still a noob on ADF.

  Marc

  Hi user

  Partial trigger helps refresh the UI component, but it applies to any operation

  This requirement, you can override default selection of the Employee table listener

  and in selectionListener, you can still call ExecuteWithParams using the OperationBinding class

  See - http://www.awasthiashish.com/2013/01/invoke-adf-table-selection-listener.html

  Give the floor to this listener of selection at the managed bean ExecuteWithParams the use of this

  public BindingContainer {} getBindings()

  Return BindingContext.getCurrent () .getCurrentBindingsEntry ();

  }

  OperationBinding operationBinding is getBindings () .getOperationBinding ("ExecuteWithParams");.

  operationBinding.execute ();

  information packet-

  Import oracle.binding.BindingContainer;

  Import oracle.binding.OperationBinding;

  Import oracle.adf.model.BindingContext;

  Thank you

• question on the sql statement

  Hi expert,
  
  I have after sql statement, the function 'hiroc_get_delta_amount1' and 'hiroc_get_delta_amount2' are used separately in select and where subparagraph. These two functions are exactly the same, except that there is a log insert inside statement. for the 'hiroc_get_delta_amount1' function, newspapers are supposed to write the newspaper of table1, while for the function "hiroc_get_delta_amount2", newspapers are supposed to write the newspaper of table2. After you run this sql, I got the data loaded in the table2 newspaper, however, no data is loaded into newspaper table1.
  
  could you please tell me why there is no data in table2 journal for function
  
  1. sql statement;
  
  Select
  pp.policy_premium_pk,
  pp.policy_fk,
  pp.policy_term_fk,
  pp.risk_fk,
  pp.coverage_fk,
  pp.transaction_log_fk,
  pp.coverage_component_code,
  hiroc_rpt_user.hiroc_get_delta_amount1 (pp.policy_fk, pp.policy_term_fk, pp.risk_fk, pp.coverage_fk, pp.transaction_log_fk, pp.coverage_component_code),
  pp.rate_period_from_date
  PRODBKUPDW_MART.rmv_policy_premium pp
  where pp.rate_period_type_code = 'TERM_COVG. '
  and pp.coverage_component_code <>'NETPREM '.
  and hiroc_rpt_user.hiroc_get_delta_amount2 (pp.policy_fk, pp.policy_term_fk, pp.risk_fk, pp.coverage_fk, pp.transaction_log_fk, pp.coverage_component_code). = 0
  Pp.policy_premium_pk group,
  pp.policy_premium_pk,
  pp.policy_fk,
  pp.policy_term_fk,
  pp.risk_fk,
  pp.coverage_fk,
  pp.transaction_log_fk,
  pp.coverage_component_code,
  pp.rate_period_from_date;
  
  2. Insert the statement used for two functions of journal:
  
  (1) function "hiroc_get_delta_amount1".
  
  insert into HIROC_RPT_USER. Values of LOG_TEST1 (v_start, sysdate,
  p_policy_fk, p_policy_term_history_fk, p_risk_fk, p_coverage_fk, p_transaction_log_fk, p_comp_code);
  COMMIT;
  
  
  (2) function "HIROC_GET_DELTA_AMOUNT_1".
  
  insert into HIROC_RPT_USER. Values of LOG_ZB_TEST_1 (v_start, sysdate,
  p_policy_fk, p_policy_term_history_fk, p_risk_fk, p_coverage_fk, p_transaction_log_fk, p_comp_code);
  COMMIT;

  WRONG FORUM!

  Welcome to the forum!

  Unfortunately, you have posted on the SQL Developer forum which, as the title of the forum is NOT for questions of SQL and PL/SQL.

  Please mark this thread ANSWERED and transfer your question in the forum SQL and PL/SQL
  SQL and PL/SQL

  When repost you your question, you must provide the DDL for the two functions, not only a query in them. And unless these functions use the pragma AUTONOMOUS_TRANSACTION and VALIDATION and then inserts into a table 'log' what they do will be not permanent anyway.

  You will also need to provide the number of rows that the SELECT query returns since if no line is activated, the first function cannot even be called.

  Where this question: why are you recording of information in the context of a still SELECT query? What goal are you trying to achieve this returns the loss of performance you pay?