Jpg and RAW

Similar Questions

• separating the jpg and raw files after import into lightroom 5

  I would like to separate my jpg and raw files as soon as they are in lightroom (right after importation), so that all my jpg files are 1 after another on the Filmstrip below and my raw files are one after the other. is this possible?

  In the grid view of the library, on the tool bar (T), replace "sort:" to "File Extension."

• Exif jpg and raw data

  Hello I have lightroom 3. I put my camera on the shoot in jpg and raw. I import the two and bring them as 1 image in lightroom. I note the picture with a star and I save exif data it saves only this thseperate xmp file. Also if I rotate the photo he only wrote it in separate folder. I want to also save the exif data in jpg file. How can I do this at once?

  Hello rob,

  Thanks fot the help. I took a quick glance to exiftool. I downloaded the exiftool.exe and after some reading, I changed the name of the exe file

  ExifTool (tagsfromfile - %d%f.xmp - ext JPG - k - progress - overwrite_original) .exe

  And it is great. If I drag a directory to the exiftool it process all jpg files and writes xmp inside data. It really works like a charm. In a go all the exif data copied.

  Thank you

• How to make my Jpg and RAW files into version sets (PSE10)

  I take the two jpg and RAW files on my camera so most of the time, I am happy with jpg and do a little editing, but from time to time I need to really work on a picture which is the place where the RAW file is very convenient. In my photo well, I have 2 of each image displayed is to say the jpg and RAW. How can I get it appears only the jpg and RAW either hidden, or as a set of version collapsed? Have 2 of each photo makes the photo well look poorly maintained and full of duplicates.

  Help appreciated.

  You have to stack pictures. Sets of version does not apply here.

• Can I merge a JPG and RAW file into a catalog and keep your changes?

  I used to shoot RAW and JPG and always used to all copy in the same folder. That worked well, but was a bit pointless as the JPG served as only a temporary preview until the RAW was loaded in behind her. For the speed of editing events, I started to divide files in two separate folders and import, but tag and basic edits, crops etc. on jpg files, so for the use of the 'News' site, then work on any higher quality customer since the FIRST requirement. Would be nice if I could later merge the two together to make these fundamental changes - and sides etc - then were applied to the RAW files. They have the same names - bar extensions, of course - be renamed by LR import. I tried on a test session, but it just seems to add separate JPG and RAW images to the catalog. Is it possible to him have associated the RAW not published with the edited JPG?

  Guy

  Guy,

  I don't want to get into or the not-so-rights of your workflow.

  You can try Syncomatic Plugin from John Beardythat will synchronize the metadata and possibly develop settings between different file formats with the same (or similar) base name. Subsequently you can stack the Raws with JPEG files, possibly using Auto carpet when capturing".

  But remember that application development parameters of a file to a Raw JPEG may not create the desired corrections, as the base is something completely different.

  Gossweiler beat

  Switzerland

  Post edited by: b_gossweiler

• I need assistance with combine jpeg and raw photo even after import [was: Hello?]

  I need assistance with combine jpeg and raw photo even after importation

  You mean both JPG and RAW file after importing from a camera memory card? There is a setting in LR preferences to process the JPG images next to RAW files as separate photos. It is under the general tab of preferences. By default, this option is not checked.

  If this is not your problem, then we will need Lots and Lots and lots more information about what you mean by the combine

• Link adjacent JPG and CR2 files

  Most of my JPG and CR2 adjacent treats files in a single file when you view in Lightroom. However, I have a folder that, for some reason, the treats like two photos - they are not connected. How can I fix photos in this folder for adjacent JPG and Raw files can be considered as a simple photo?

  Thanks for any help.

  You can promote the crude to the top of the stack. Probably if you expand all stacks, then filter to just the RAWs and then SHIFT - S to move them all at the top of their respective batteries. I never shoot RAW + jpeg, so I have nothing to test on.

  Jao

• I started shooting RAW format.  I saved in jpg format and noticed that my images are now about 1 MB in size.  When I used to shoot jpg and save jpg, they were about 8 or 9 MB. I am more that I realize compress.  Can you please walk me through a step by st

  If there is no photographers out there.  I would also like to know if you save as .tif for them.  I wasn't sure that customers could get files printed everywhere .tif that they wanted (as they can with jpg).  Let me know how save you for them.

  The jpg file sizes can vary significantly - depending on the topic and you choose the quality setting.

  Flat images, like a snowy on a cloudy day, landscape will compress much more than an animated image, as trees, sunny with lots of details.

  When you save a jpg file, you can choose quality on a scale between 0 a 12, where 12 gives the highest quality and the least compression.

  You will see the size of the file in the dialog box options Jpg, and you can also preview to see how the jpg will look.

  Having said that, the file size is not really an indicator of the quality or resolution - dimensions in pixels are.

  But if the file will print, use a high quality setting, like 10 or 12.

• Style of photo camera matching and RAW?

  I took hundreds of vacation pictures.

  My Nikon is set to a neutral type style for the video.

  I had as it transfer to Lightroom. Right now the preview looks correct, but when he looks at a crazy contrast.

  Any suggestions?

  In camera styles apply only to the jpgs and never RAW.

  You have the option in LR to apply profiles of cameras that are roughly equal to the styles in camera.

  Operating manual for Nikon: How to get Nikon precise colors in Lightroom

  It is same for Canon or others.

• 5.7 LR is no longer exporting files jpg (from RAW). No error message, just "finished work". No way around changing some options for export as the name of file, image size...

  Why is 5, 7 LR is no longer exporting ALL files jpg (from RAW)?

  No error message, just the usual "finished work" - but without actually writing a jpg file.  No way around changing some options for export as the name of file, image size...

  Hi antjeh37833361,

  Could you please export a Jpeg image and see if it exports.

  Also try to export the RAW image in Jpeg format on the desktop and then see if it exports.

  Please upgrade to the latest version 5.7.1 if Lightroom you are currently on 5.7

  Kind regards

  Tanuj

• Quality of exported JPG of an original JPG (no RAW)

  Someone gave me a CD of JPG images, and I want to run these in LR. I'm a shooter FIRST, but shoot JPG on a point and shoot, so don't know (and teach) formats RAW and JPG workflow. But here's a question: if I sort a shooting JPG and export all, images of 5 stars, for example, the exported file would be degraded quality? I'd be better off, assuming that there is no editing, noting the names of those who must be exported and simply copy the files in my source folder to a destination? Thank you!

  The quality of course depend on the quality of the files from the CD. Lightroom adjustments will not work in exported files, but can the quality you select when exporting. So if you export to a high quality setting of more than 75% shouldn't you see any degradation at all unless the 'original' is very poor to begin with.

  Hope that helps, but you can be better to test a file to see.

• Links in the JPG and GIF images.

  Hello Board,

  I do a few JPGs & GIFs animated for my site and my CMS allows the images to link to only a single link; for example, it

  connects the entire image.  Is it possible to incorporate multiple links in a single image, and THEN upload to a CMS?  If so, how?

  JPG and GIF image files may not contain even a single link. Links are only made by HTML.

  You can crop the image (see Photoshop help on "cutting") then apply unique to every links in the editor WYSIWYG CMS'.

  You can also manually enter an HTML image map for a single image file if your CMS allows raw HTML and does not filter this type of entry.

• Opening files jpg as raw... size of the image

  My desktop color correct thousands of images per day for newsprint. These come in mainly sub form of files jpg and some eps targets. Most of them need a lot of work in color correction, and I found that the jpg with the dialog box open THOUGHT and tweaking them it can be a huge time saver (a menu with a bunch of sliders, against the opening of the curves, shadow light, hue/sat, color balance, etc.)

  However! There are two things that prevent us from using the opportunity to open jpg files and using the raw dialog box:

  1. size of the image. It is images of several clients who need us to preserve their original image size and dpi, whatever it is. Other customers want to keep us the width/height and rasample the image to 200 dpi. (example: take this 3 x 5 "@ 956dpi and make 3 x 5" @ 200 dpi) If I open one of their images in raw, I don't know what the original width/height were because the file has been resized to what I used on the last image. I noticed defaults to 240. The changes of dpi original jpg with each image we get. Is it possible to do the first dialog does not change the size of the image? Which brings me to...

  2. once I opened a jpg using the raw dialog box it will always open in raw (always change the size of the image.) If I want to just open my jpg as an ordinary image in photoshop, I have to go in camera raw preferences and turn off the ability to use raw to jpg. Is there a faster way to ignore the parameters of raw on a jpg, once it has been changed as raw?

  That is why we do not believe, even if it would be a huge advantage for us to be able to make these color corrections. If anyone has any ideas how to get around this, or even an easier workflow, I would appreciate it!

  # 1, if you look at the image in Bridge, you can note the dimensions and the resolution... then you put this same resolution resolution of the cab.

  # 2, none... as you note the preference of ACR, control or not Camera Raw will serve to open the image. You can use the SHIFT key by double clicking in Bridge to open the image directly into Photoshop and bypass ACR dlog, but Camera Raw will still be used if it is set to be used in the preferences...

  You will need to keep your image resizing in Photoshop because Camera Raw is not designed to do this kind of resize/resampling...it's designed initially as a raw processor and more later added the ability to open and process the camera JPEG and TIFF. Put those kind of controls in Camera Raw would not make sense since the end result of an open in Camera Raw image is supposed to be an image processed and opened in Photoshop. So, what you are wanting is really outside the scope of the concept of development... I'm sorry.

• jpg and videos do not open some sites since the upgrade to FX 39

  Don't know what hurts, but the first attempt at this has no post. I was connected at the time.

  Links that do not open correctly (jpg files and videos (YouTube, etc) are on certain sites only, others work as before.)

  The jpgs on 'broken' websites appear as a large full gray area, a border around a white box, or a small icon. Right click on one and select open in a new tab, the are displayed correctly. Just as same behavior with links of PNG files.

  The videos show as blank spaces. Make a right click on this space does not offer a new tab (share this page, save the page slot, etc..)

  I'm on a laptop of HP under Windows 7 Pro; My wife on a Dell laptop, also Windows 7 computer doesn't have the problem. I have several modules more than she does.

  Thank you

  togfnh said

  Thank you, Bryan.

  I opened an old profile and both related JPGs and YouTube videos open correctly. What happened in (or around the same time that) upgrade affected the current profile.

  Question: opens a new profile of the best way to solve the problem, or is there something else I should try first?

  Thank you

  You might want to try dumping your cache and if unsuccessful following would be to clear out cookies.

  You add or remove plug-ins since it last worked properly?

• Download problems. Images JPG and my Nikon Coolpix P7800 to my MacBookPro NRW

  . JPG and NRW images will upload more from my Nikon Coolpix P7800 to the camera section post it in the Finder on my MacBook Pro.

  So far they have downloaded automatically when I plugged my camera into my Macbook but not anymore. This means that they also aren't in Nikon View NX2 program so I can't work with them.

  I have not changed anything as far as I am aware, but I MacKeeper and I recently had do them an audit of the single system. Maybe people it changed something, but I'm pretty sure that the problem existed before that date.

  Does anyone else have this problem? If so, help!  I run OS El Capitan 10.11.1

  The images appear, when you use a card reader instead of plugging the camera?

  Or when you use another card?