Links in the JPG and GIF images.

Similar Questions

• FM2015 - suddenly, FM will display all .png, jpg or gif images! Help?

  Ran v13.0.1.385 when it arrived today and have loaded updated to 13.0.4.532 where it still happens.

  (NOTE: what happens on my main PC (Windows 7).) I have a laptop (Windows 8) that is also running 13.0.1.385 and the problem is * not * be there.)

  Worked on a few pounds, when suddenly, one of the documents shows the dialog box "can not display imported graphics" and showed a gray box. Usually, this happens when too much is running (in the past, at least) and FM would get cranky.

  Closed everything, rebooted, started to frame, open book, same problem - some images were the gray boxes (size of the anchored frame), some are black rectangles (size of the original image in the frame), and some have shown that the upper part of the image and the rest was black.

  Has taken a screenshot of the sample, stored in different formats, then imported the images into my doc to see what will happen:

  • .gif - displays the top of page 1/5 of the image, then the rest is pink
  • .jpg - shows the top of page 1/10 of the image, and then the rest is black
  • .PNG - displays the top of page 1/20 on image, then the rest is black
  • .bmp - shows very well
  • .PDF - shows very well
  • . TIF - poster very well
  • .PSD - shows very well
  • . VSD - poster very well

  The properties of the object for each image are correct (they are all in the same folder).

  If I double-click the offensive images, they appear well in Viewer photos Windows (.jpg/.png) or IE (.gif).

  If I change with an application (for example, Photoshop), they open fine for publishing.

  If I print the document in pdf format, the images will be displayed as indicated above (gif/jpg/png appear as boxes of pink/black), all others appear very well.

  Help? PLEASE?

  :-)

  Thanks in advance for your suggestions.

  Sidenote: Since these are the only types of image using the default Windows Photo Viewer watch a program, I thought I'd pass the default settings of Photoshop, to keep everything "in family". Cannot change the default, stays in the Windows Photo Viewer.

  OTHER STUPID SOFTWARE!

  I downloaded a software yesterday that I needed for the work, do not remember what it was. He installed an application (without telling me) who was supposed to be a malware scanner. (Just saw him in "Uninstall or change a program").

  Uninstalled. (Don't remember the name, sorry.)

  In the framework, and display images fine now. PDF generates very well now.

  Sorry for the grief.

  SOLUTION to THE PROBLEM: what frame suddenly begins to * not * do what he did very well, check if new applications have been installed and remove them to see if they are the cause of the problem.

• break the link between the pix and sound

  Ugh I still don't know how to break the link between the pix and the sound in the timeline then of

  the sound and image are together. I know it of easy but have not yet found the way.

  Thank you everyone.

  Right-click on the clip and click 'Remove link' If you just want do temporarily, ALT click on the clip.

• Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps.

  Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps. If anyone has had this problem and if yes, how do solve you this problem?

  There has been a number of similar reports. See also http://osxdaily.com/2016/03/25/troubleshooting-ios-9-3-update-problems/

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Original title: problem e mail

  I click on the links in the email and get a box that says: "this file does not have a program associated with it for performing this action" and the link cannot be opened.

  Suggestions;

  1. make sure that your e-mail program is your default program.

  2. make sure that your Internet Explorer, or your main browser has all its faults.

  You can do both of the above by following these steps...

  Start button > right column, click default programs > click Set Your Default programs...

  1. click on your e-mail program > it doesn't say "this program has all its defaults"?
  If not, click on choose by default for this program > check all boxes below the list > click on save when finished.

  2 do the same as above for your Internet Explorer, or your main browser.

• Allow a user to the admin of the site and upload images to a DB if possible (was: new to Muse...)

  I've been a user of Dreamweaver, at the time of UltraDev, I need to be able to allow a user to the admin of the site and upload images to a DB if possible. For this I used in DW with a DB on the backend. The customer, log in and then upload images and Add info to the image and details.

  Then I looked and did not find anything which allows for a DB on the backend... can someone help with this question?

  Thank you

  B

  Thanks for the info... I think that allowing them to edit via the adobe software in the edition of browser will do.
  https://www.YouTube.com/watch?v=p12weA0YMCc

  Best regards

  B

• Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Im just get a blue screen, where the image should be in the develop module. What is happening with the Raw and Jpeg images. The display of the preview in the toolbar. Any ideas?

  Disable GPU acceleration. Under preferences-> Performance, clear the check box

• is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  is it possible to have two different images in "develop" mode  I need to match the color and other image to the other.

  Select the reference image and choose window > secondary display > Magnifier (locked). Now the image you want to change, and start working. You can refer to the secondary display window while you work on the image you are editing,

  If you have a second monitor attached, the entire second monitor may be the secondary display.

• Styles different links in the body and the footer?

  Hello

  I want to style links for hyperlinks in the page footer, they are in the body of the site.  Is it still possible?

  The problem is that the body background is white, and footer background is dark brown. So there is no way that I can use the same styles for links.

  I know that there is no "Workaround" that connects the blocks of text, but this isn't what I want.

  Thank you!

  Matjaz

  Please refer to the Link Styles FAQ thread and apply different styles to your links in the footer and body.

  http://forums.Adobe.com/thread/982968

  Thank you

  Vinayak

• Grids of, how to place above the objects and placed images?

  PS the grid can be displayed above the jpegs allowing me to measure exactly, AI shows the grid below placed images and vector obects, which means that I am not the squares of the Board through the objects and images to place my other lines and shapes, is this possible? Place the rack over the objects and placed images?

  Yes. In the preferences: guides & grids: uncheck the box for the grids at the rear. easy.

• create a link to the page html to images and css

  A customer wanted a change to one of the pages on their website. So, I opened the page in DW and "recorded under ' another name of the same page (in order to keep a copy of the original page) in the same folder of the site. I made the changes and it was going on well in the browser preview. I then renamed this revised page identical to the original page back. I made this name change in the file to the desktop folder (could this be the problem?). When I downloaded from the site, it looked like all connections to the doc .css and the folder of images are no longer there. So, I pulled it in offline mode and now I am trying to find a way to re-establish links the .css and the images. Everything seems fine when open in Dreamweaver and when I preview it in mode browser, however in the thumbnail preview shows question marks when the images are supposed to be, and when I download it, it looks like hell.

  Any ideas as to how I can restore links?

  Thank you.

  rigoliarts wrote:

  I made this name change in the file to the desktop folder (could this be the problem?).

  Yes, that would be the problem. You should never work via the files Panel > window > files. If then, you make changes to a file or move to another location in the folder root of the Dreamweaver site will ask you if you want to update the links with this file assocaiated.

  rigoliarts wrote:

  Any ideas as to how I can restore links?

  Unless you have a backup of the original file, you may need to update the links manually. If you have the orginal file back to its original location, and then perform updates through the control panel site.

• How to dimensionnera the JPG in Illustrator image?

  I have skills that are very basic in Illustrator, but known 'reasonably' in Photoshop. I am now trying to create a version vector logo in Illustrator, but the logo contains an image raster JPG for example.

  My question is how this part of the logo dimensionnera like us resize it?

  Not very well, I'm afraid.  Being a JPG file, it has already been compressed and may introduce artifacts that will improve only in larger sizes.  You basically broke rule number one: don't use bitmap images in a logo file.  There are solutions, but the best thing to do is to recreate the bitmap in vector graphics image areas.  I know, not an easy task.  If you absolutely must have the bitmap displayed in the logo, you will need to create several different sizes of logo using Illustrator of high matrix resolution.  That would mean regenerating the (original high resolution file > tiff) image several times more to each new size file.  Possible, but not really a solution.

• Links to the Compositions and/or slideshows?

  Is it possible to put a link on an individual image in a publication or a slideshow?

  I would like to have links to other pages on each image. For example, as the image #1 appears, if the user clicks on the image that it would take the user to a web page. So now an etc. for image 2,3,4...

  If this is not the case, how could I go to solve this problem within the Muse?

  Yes.

  Just click on the image and choose your link. (see image below)

  When you view in a browser, and the mouse on the image a hand will appear indicating that the image is clickable.

  

• Replace the link display the basket with an image

  Hello

  I need help do the above.

  It worked but clicked the wrong button and restore to the original model.

  I searched through the 'help' and found this _image http://KB.worldsecuresystems.com/654/bc_654.html#main_Replacing_the_View_Cart_link_with_an but the link no longer works. It's in a post that Mario has implemented

  The solution involves no javascript code just a change to the tag?

  Hello

  In my view, there is an option in the tag, but I don't remember off the top of my head.  I'll check with our team for this info.

  In the meantime, the solution is to update your 'modulestylesheet.css' CSS and update the background with an image file attribute.

  

  Here is the result on the front-end server.

  

  I hope this helps!

  -Sidney