. JPGs two (one in top one directly below)...

Similar Questions

• My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?

  My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken.  This seems to be the only program with problems. All the answers?

  Hi retiredinflorida,

  Welcome to Microsoft Vista answers Forum!
   
  It is a known issue using IntelliPoint from Microsoft and Quicken software drivers.  Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
   
  However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.

  The Microsoft wireless mouse does not work as expected if:

  You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398

  In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
  what you think

• Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Can I connect my HP4625 all in one directly on my ipad/iphone without using a wifi network. ?

  Hi xxtopgunxx,

  Welcome to the HP Support forums.  I understand you want to print from your devices Apple to your printer Deskjet Ink Advantage 4625 without the printer is connected to a wireless network.

  It is possible that we can get the printer to disseminate its own network. Please note that the network will broadcast the printer will not have access to the internet.  Please follow the steps below:

  • On the front panel of the printer, please press the wireless button
  • By using the buttons on the right, highlight and select wireless settings
  • Highlight and select Restore Defaults
  • Select Yes. A message appears indicating that the default values of the network have been restored
  • Open your application settings on your Apple device, please
  • Please click on wifi and choose the network that starts with "HP-SETUP.  This should connect to your Apple device to the printer
  • Now you should be able to print using the 'Action' icon.  If there is not a print option when you press the action icon following all guidelines for Apple AirPrint

  If you go to print and your Apple device does not see the network, you will need to follow the procedure again. It should be at least 60 minutes before the HP - Setup network ceased broadcasting.

• Wheel scroll/zoom only in one direction in some programs

  When I use a scroll wheel (external or optical mouse or laptop touchpad scroll wheel) on my laptop (with Windows Vista), but scrolls or zooms in one direction in some programs. For example, when I scroll in any direction in Google Earth or AutoCAD, it zoomed in only (should zoom out when wheel downwards). In IE, the wheel works correctly. In Word, it does not at all. I saw online that others have had this problem with Vista, but I can't find a solution. How can I solve this problem and get the roulette wheel or the touchpad works properly?

  Hello
  I would like to start by installing the latest version of the software/drivers for you devices.

  I noticed a strange behavior in Chrome with my scrolling as well. It scrolls side by side, however I move the steering wheel (4 directions). And only the page up and down if I'm on top of the sidebar. It is a problem with Chrome... not your mouse.
  Most of the maps online zoom only, they do not go side by side... regardless of the browser.
  Word and other applications are a different floor. They must act as expected. This seems to indicate that your driver does not work properly. First try.

  (Note also that some older devices can be is no longer supported.) Mark <> Microsoft Partner

• Flow ip VPN in one direction

  Hello

  I have a VPN from Site to Site that works finein one direction, distance to the Center, i.e. it goes upward, using VNC to connect remotely to Central or vice-versa works, on the back (Central remotely) No and ping is not two-way.

  IMHO, it would take something lack on the central site, because if I ping from central lan to lan remote or vice versa asa central says:

  No group of translation found for icmp src, dst domestic: domestic IP_ON_CENTRAL_LAN: IP_ON_REMOTE_LAN (type 8, code 0)

  Distance is on nat0, i.e. I

  IP LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0 allow Access-list extended inside_nat0_outbound

  inside_nat0_outbound list extended access allow icmp LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0

  IP LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0 allow Access-list extended outside_1_cryptomap

  outside_1_cryptomap list extended access allow icmp LocalLAN 255.255.255.0 RemoteLAN 255.255.255.0

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound list of outdoor access

  card crypto outside_map 1 match address outside_1_cryptomap

  outside_map game 1 card crypto peer REMOTE_PUBLIC_IP

  On the remote control (a pix 501), I have:

  inside_outbound_nat0_acl LanRemote 255.255.255.0 LanCentral 255.255.255.0 ip access list allow

  access-list allowed inside_outbound_nat0_acl icmp LanRemote 255.255.255.0 LanCentral 255.255.255.0

  outside_cryptomap_20 LanRemote 255.255.255.0 LanCentral 255.255.255.0 ip access list allow

  access-list allowed outside_cryptomap_20 icmp LanRemote 255.255.255.0 LanCentral 255.255.255.0

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  card crypto outside_map 20 game peers CENTRAL_PUBLIC_IP

  outside_map card crypto 20 the transform-set ESP-3DES-MD5 value

  outside_map interface card crypto outside

  What I am doing wrong?

  Thank you

  No group of translation found for icmp src, dst domestic: domestic IP_ON_CENTRAL_LAN: IP_ON_REMOTE_LAN (type 8, code 0)

  something is wrong with the routing on Central

• In order to get several features of tab line do I downgrade to the version of firefox that supports one applications below?

  I want to show the tabs on multiple lines in firefox.

  While Firefox allows you to have as many tabs that you want to open at any time, if you exceed the width of the screen, you will then need to scroll left and right to see. I want to have multiple rows of tabs.

  In order to get several features of tab line do I downgrade to the version of firefox that supports one applications below?

  What are the best options for several features of tab line?

     Tab Kit - https://addons.mozilla.org/en-US/firefox/addons/versions/5447
     Tab Mix Plus - https://addons.mozilla.org/firefox/addon/tab-mix-plus/
     Tab Utilities - https://addons.mozilla.org/firefox/addon/tab-utilities/
  

  Best regards
  Bubba

  Extensions 'Tab Mix Plus' and "Tab Utilities" support Firefox 10.0a1, so no need to downgrade your old Firefox 7.0.1 for an even older version.

• X 200 fingerprint reader Tablet reads only in one direction

  Hi all

  I bought an X 200 Tablet and I got free upgrade to Windows 7 from Lenovo. After I've manually upgraded from Vista to Win7 (not a fresh install), what's up.

  The fingerprint reader works very well and he even kept my impressions of Vista. However, with Windows 7, I can just slide my fingers in one direction (from right to left, if you use the 200 X in the direction of the normal laptop). If you are a user of Tablet, you would know that there is a left and right 'tooth' that surrounds the player, allowing you to slide your fingers in both sense.

  I tried to reinstall the software of fingerprint - as well as my stored reset reader fingerprints - but it only let me slip in one direction. If I slip my fingers from left to right, I get an error 'no match '. I erased my impressions and stored once again, drag from left to right with the screen to its normal position. Lenovo Fingerprint Software my impressions, but when I connect to Windows, I can still only slide from right to left. Is it a question of Win7?

  I finally thought to it! I went to my device manager > biometric devices > one click with the right button on authentic Tech > properties. The pilot appeared to be outdated, so I tried 'Update Driver' for fun. Windows 7 has actually found an updated online version, and now it is updated to v.8.1.2.56, dated dated 07/07/2009. Now, I can slide my fingers from left to right or from right to left!

• BlackBerry smartphones to synchronize contacts from Outlook XP XP for BB 8830, one direction

  I want to only sync from my PC (Windows XP pro) BB 8300 to go one direction ONLY and NOT the reverse.  How can I set up?

  Thank you

  msmouser

  Check the seal capture to configure PC sync to device screen.

  1. open the Desktop Manager

  2. synchronize

  3. click on sync under Configuration

  4. click on sync

  5. Select address book

  6. Select configuration

  7. Select your desktop customer email and press Next

  8. Select Onc waysync device (Device <-> mail client)

  9. check replace all data in the application of traget if you want to erase all data on your device.

• HotSync only works in one direction

  I recently moved from a PC running XP for an Imac OSX 10.5.

  I have a Tungsten E and install Palm Desktop 4.2.1 installed on Imac, open when the connection active.

  HotSync seems to work well, with no error message in the log, but looking at the result, sync'ing of the calendar is only went in one direction. A new entry in my handheld was transferred to the Imac, but a new entry on the Imac did not appear on the handheld. This never happened with the PC, in that any new entry was Sync, regardless of where it was entered.

  Any suggestions to make it work in both directions are welcome! Thank you, Alfred

  I've got it-, I think.

  For some reason, my name (the only authorized user) not was not entered in the part of little 'user' on the bar - just a message "no user". Once I fixed that it works very well! I have no idea why it didn't recognize me from the start, but I tried to synchronize both ways since then, and it worked fine.

  Thank you guys for pointing me in the right direction - I had not advanced far enough in the manual to understand how to set up.

  Cheers, John

  Message relates to: Tungsten E

• Someone was able to get the TOP of direct exec to show the other than 0% cpu %

  Someone was able to get the TOP of direct exec to show the other than 0% cpu %
  for all the processes... I've tried it on anf 3.2.6 now 4.0.3 and it still says 0%. Envoy in trouble months ago... Runnig im opensource hyperic on a system of ubnutu 6.06 linux
  Architecture: x86_64
  2.6.15 - 53-amd64-Server

  Mike,

  Here is the bug report that I mentioned when I said that it should be fixed in 4.1.  Now he says he's planned for 4.2.  I swear it says 4.1 when I modified looked at him.  :-(  If all goes well a fix will make it in 4.2. Maybe a 4.1.x if we are lucky. :-)

  http://JIRA.Hyperic.com/browse/HHQ-2678

  Brian

• Muse / subnavigation: How can I create a subnavigation under the main navigation - the TWO levels in the HORIZONTAL direction?

  More specific: I want to create a navigation of two levels, Pentecost two levels in the horizontal direction.

  Example:

  level 1: products,

  2nd level: Type 1, Type 2, 3 etc.

  I thought, it was very clear what to do.

  If, for example, type1, type2, type3 are child pages PRODUCTS, place these sites in the vertical direction under the parent menu PRODUCTS, and menu entries will appear horizontally.

• 6830E all-in-one: direct wireless installation

  try to use direct wireless for my all in one printer. The brochure says it is an option, but there is no option on the control panel of the machine to implement?

  bought for this purpose - can I leave the printer in my trailer on site and I just print from my laptop when needed? Help! (It works fine through my hotspot, but I prefer direct wireless.)

  Hi @ffej1,

  Welcome to the HP Forums!

  I appreciate that you try to set up the direct wireless functionality for your HP Officejet 6830 pritner, on Windows 7. I'm happy to help you!

  Please visit this site, HP Wireless Printing Center - Wi - Fi Direct and direct wireless HP, for more information on how to connect wireless Direct.

  For future reference, hereis the user guide for the your printer.

  I hope that solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• VPN site-to-site initiated in one direction

  Hello. We try to establish a VPN site-to site between two ASA firewalls, let's call them ASA1 and ASA2. Problem is that ASA1 cannot start the connection. ISAKMP of ASA1 packets reach ASA2, but removed by an unwritten rule.

  When ASA2 launches, everything is OK. And while the stream exists on ASA2, ASA1 use flow, so he can start VPN also.

  Here's the output of packet - trace on ASA2:

  ASA2 # packet - trace entry outside udp ASA1_IP isakmp ASA2_IP isakmp detailed

  Phase: 1
  Type: CAPTURE
  Subtype:
  Result: ALLOW
  Config:
  Additional information:
  Direct flow from returns search rule:
  ID = 0xaffd1bc8, priority = 13, area = capture, deny = false
  hits = 14830976, user_data = 0xaee75a18, cs_id = 0 x 0, l3_type = 0 x 0
  Mac SRC = 0000.0000.0000, mask is 0000.0000.0000
  DST = 0000.0000.0000 Mac, mask is 0000.0000.0000
  input_ifc = out, output_ifc = any

  Phase: 2
  Type: ACCESS-LIST
  Subtype:
  Result: ALLOW
  Config:
  Implicit rule
  Additional information:
  Direct flow from returns search rule:
  ID = 0xae06b0c0, priority = 1, domain = allowed, deny = false
  hits = 16921285389, user_data = 0 x 0, cs_id = 0 x 0, l3_type = 0 x 8
  Mac SRC = 0000.0000.0000, mask is 0000.0000.0000
  DST = 0000.0000.0000 Mac, mask is 0100.0000.0000
  input_ifc = out, output_ifc = any

  Phase: 3
  Type:-ROUTE SEARCH
  Subtype: entry
  Result: ALLOW
  Config:
  Additional information:
  identity of ASA2_IP 255.255.255.255

  Phase: 4
  Type: ACCESS-LIST
  Subtype:
  Result: DECLINE
  Config:
  Implicit rule
  Additional information:
  Direct flow from returns search rule:
  ID = 0xad731f30, priority = 0, domain = allowed, deny = true
  hits = 60834932, user_data = 0 x 9, cs_id = 0 x 0, use_real_addr, flags = 0 x 1000, protocol = 0
  IP/ID=0.0.0.0 SRC, mask is 0.0.0.0, port = 0
  IP/ID=0.0.0.0 DST, mask is 0.0.0.0, port = 0, dscp = 0 x 0
  input_ifc = out, output_ifc = any

  Result:
  input interface: outdoors
  entry status: to the top
  entry-line-status: to the top
  the output interface: NP identity Ifc
  the status of the output: to the top
  output-line-status: to the top
  Action: drop
  Drop-reason: flow (acl-drop) is denied by the configured rule

  ASA1 added to inbound ACL on the external interface of the ASA2 did not help. Using tracers of package in ASDM has not point to any specific rule, he just showed the entire list of the ACL rules. Using asp-menu type capture displays the reason of gout as packet-tracer, without more details. ASA2 layout only response did not help.

  How to interpret the values of phase 4, i.e. to find the rule that causes drops, based on the id and other data? There is no such id in HS to access lists.

  Any other ideas? Thank you very much.

  And an idea more :)

  Maybe you have something like this on ASA2:

  Access-group outside_access_in in interface outside control plan

  ?

  Keyword group-access-control-plan sentence, traffic, which is aimed at the interface of the ASA, may be filed. Please, see the following discussion:

  https://supportforums.Cisco.com/discussion/11130691/access-group-control-plane-Cisco-pixasa

• Execute SQL commands two one after another

  Dear all,
  
  I have these two lines of code that I need to run individually. Is there anyway that I can get them both to run simultaneously?
  
  CREATE TABLE TBL_DATE AS SELECT DUAL FROM SYSDATE;
  CREATE TABLE TBL_DATE_2HRS_AGO AS SELECT (SYSDATE - 2/24) FROM DUAL;
  
  Perhaps inbed in a procedure or something? It should not be simultaneous, even if they are run one after the other.
  
  Thank you

  Still not very clear to me, but maybe you are looking for sth. like

  BEGIN
     EXECUTE IMMEDIATE 'CREATE TABLE TBL_DATE AS SELECT SYSDATE dt FROM DUAL';
     EXECUTE IMMEDIATE 'CREATE TABLE TBL_DATE_2HRS_AGO AS SELECT (SYSDATE - 2/24) dt FROM DUAL';
  END;
  /
  

  ?

• vertical scroll bar only goes in one direction if used

  original title: scrolling vertical bar troubleshooting

  I have IE 9 with Vista, logitech wireless mouse. Recently, I had problems with my vertical scroll.  If I try to go into the menu for something I don't see that it reverses back to the top before I can choose something less. If I try to adjust my sound on the taskbar, it goes back to the high and will not stay where I put it. I can use my mouse to point, but not to move the scroll bar down. I have to use my page down. I can also drag either.

  Lisa

  What is the model of the mouse?

  You can also try to change the mouse settings in the Control Panel or try to uninstall then reinstall mouse and make sure you have installed the latest drivers. You can find more information about your mouse below

  http://forums.Logitech.com/T5/mice-and-pointers/CT-p/mice_trackballs