JQuery errors and slow site

Similar Questions

• When I try to open a PDF in a Web site, I get a runtime error and the site is stopped.

  Hello

  When I try to open a PDF in a Web site, I get a runtime error and the site is stopped. How can I fix this problem? I am running Windows XP Home Edition.

  original title: Run time error

  Hello.

  I guess you are using Acrobat Reader to view the PDF files?

  You can try to download the latest version of Acrobat Reader here:

  http://www.Adobe.com/

• many runtime errors and slow responses

  Originla title: what is WiseFixer and is a legitimate program?

  I get a lot of errors of execution and slow responses.  Ran the scan in the wise Fixer but was reluctant to unlock the registry to run the repair.

  Hello

  · When you receive the errors?

  · It is when you work with a program or a particular application?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  · Give us the exact error message that you receive to help us best solve the problems.

  For the problem with the performance of the computer, you can follow the steps in the link below: how to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• Redraw tons of Script errors and slow

  Recently, I set CS 5.5 with Bridge 4.1.0.54 on a new MacBook Pro.

  When I launch Bridge I get the following messages:

  

  

  

  I am confident of a few things. First of all, it is obviously somewhat related to this issue:

  http://forums.Adobe.com/message/3083307

  Secondly, it has nothing to do with the CFS or Samba share.

  Finally, the error has something to do with the output module script - if I start without it, no errors.

  Currently I have my MBP installation with two drives. SSD for the system software and a second SATA drive for content. All software from my system are on the boot SSD drive, however, my users folder is divided between the two. All except ~/users/xxx/library is symbolicly linked on the second disc.

  If you look carefully at the above referenced thread, all errors are the same except for the error "could not create. In the thread, it lists a specific user, my error lists the Volumes/Null /...

  Here's what I've tried so far:

  Reset the app

  Trashed the prefs.

  Start without scripts

  reinstalled all of the CS Suite 5.5 after uninstalling and using the cleaning tool

  To add insult to injury, when the output script is disabled and bridge does not charge, it makes it very slow to the point where it is not usalbe. It should also have a ton of redraw problems.

  Any advice?

  I think I can find a workaround.

  I've been racking my brain over the past days to understand it. I've tried at least a dozen patches permsissions, through the apple utility and manually. I reinstalled the bridge and CS 5.5 three times using the cleaner script and a new installation. NOTHING.

  So, I went back to the original error message:

  

  One thing I noticed was that whenever bridge began, it created a folder in /volumes called 'null '. I checked three different installation program for Mac that it the same mine and NONE of them has created this folder when you start bridge.

  I still don't understand why my laptop does this.

  However, I looked at the error and it seemed to me that the bridge was looking for a path that does not exist, which was null/volumes / / Adobe/Adobe Bridge CS5.1/Adobe Output Module/Mediagallery

  the path of Adobe/Adobe Bridge CS5.1 /... is the same way that my folder ~/library/application support /... for adobe.

  First, I created a regular alias in this folder to create the false path. No dice. Then I tried a symlink to creat the fake/volumes/null/Adobe/Adobe Bridge CS5.1 road / Adobe Output Module / Mediagallery

  Voila. Worked like a charm. I can now start Bridge without errors, script errors, etc. I have also all the features of my exit sign back and I am able to use it without having the disk space error.

  Now to understand why bridge creates a folder "Null."

• Help with jquery error on the site of muse

  Hi Musers,

  I hope you do well. I have a small question, I hope someone can help me with. I created a website using muse and each page is displayed with the same 4 mistakes when I inspect the site.

  
  Here is the link:

  http://www.digital-trip.com/

  www.Digital-Trip.com

  During the inspection in chrome, what it comes up with this error:

  www.Digital-Trip.com/:1 uncaught SyntaxError: unexpected token % in JSON in position 0

  Any help would be greatly appreciated.

  Thank you very much

  Adam

  I think the problem is in your hero slider. Just for testing purpose out a slide or add a slide and see if this error number changes. Have you used a third party for that widget?

• When I try to get into google I get a certificate error and do not trust the site

  When I try to enter in google site I get a certificate error and a message not to trust site and put / add www in the address bar, but it does not work either thank you for anyone who can help

  Please start with the basics:

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Report with the results if you need assistance. MS - MVP - Elephant Boy computers - don't panic!

• Computer is very slow, send me errors, and programs do not respond.

  Original title: Windows 10

  I have upgraded to Windows 10 and did not like it and changed back to Windows 7. Now my computer is very slow, it sends me errors, and the programs fail. What I do?

  Hello

  Please contact Microsoft Community.

  I understand your problem and will certainly try to help you with this.

  I suggest you try the methods mentioned and check if it helps:

  Method 1:

  
  You can run the fix that it provided on the link and the Coachman.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  
  You can also try the steps outlined in the links to improve the performance of the computer.

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  See also the links in the help:

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Slow PC? Optimize your computer for maximum performance.

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  I hope this helps.

  Kind regards

  Anusha

• Generic Host Process for Win32 Services has encountered an error and needs close.__Unable to access windows update through the site or automatic updates.

  Hi, I really need help.

  My computer has been giving me problems recently.

  I get a random error message: Generic Host Process for Win32 Services has encountered an error and needs to close.

  My taskbar would turn gray and I cannot control the volume.

  I checked the event viewer, and this is what has been shown:

  Failing application svchost.exe, version 5.1.2600.5512, failed module ntdll.dll, version 5.1.2600.5755, address failure 0 x 00023845.

  %

  Hi E_G_G_S,

  1. did you of recent changes on the computer?

  2. when the taskbar turns gray?

  3. have you printer connected to the computer?

  Method 1

  See the Microsoft articles below and try the steps mentioned them, check if it works very well.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Method 2

  Even after following the steps above if you are unable to access volume control and taskbar gray towers I suggest you check it persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300-1N8 on XP in AHCI - "iaStor" error and gel

  Hello guys,.

  A friend of mine bought a new A300-1N8 Toshiba without BONE a month ago.

  I installed Win XP Pro Sp3 and after 2 days of wondering how to activate DCIS (because in compability mode it was hellish slow), I found out how do and I've done my XP with NLite and drivers from the Intel Matrix Storage Manager - ICH9M and reinstalled windows in AHCI mode with no problems (because I did not know that there is a way to install it without reistaling windows)
  I installed all the drivers on the site and everything was going well until the time we discovered that the system randomly stops responding and freezing... then restarts the only way to switch.

  I found that in the event viewer (in the Control Panel - administrative tools) on the information system pops up an error randomly:
  {color: #ff0000} "the device, \Device\Ide\iaStor, did not in the expiration time". {color}
  And in fact, the Iastor.sys was the system for the Intel AHCI controller driver, is it good?

  So after this error apears - the HDD lights on and the system unresponsive after some time or after trying to restart or shut down Windows menu start.

  I found here
  [http://www.hardforum.com/showthread.php?t=1368385]
  the error can be can be solved by changing the settings in the LPM from 1 to 0.
  I fixed it but the still apears in the error and the system freezes randomly :(

  Any suggestions?

  Hmm, I read on one of the sites that I've found in google that a HARD disk failure could cause this problem too.
  A guy has reported on the same issue of time out, and after installing Win XP on another HDD error didn t happen.

  You must also make sure that the DMA if available option has been selected in the Device Manager-> primary IDE channel-> avancΘs-> device 0

• I just installed win 7 Ult 7 days. In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

  I just installed win 7 Ult 7 days.  In the event viewer, I got 1000 errors and I was wondering where I can get help? TY

  And the list continues to become more mistakes as the months go bye.  Usually after 3 monts, my PC slows to a crawl, and I have to reinstall Windows & Ultimate!

  It is very annoying.  I'm not the smartest when it comes to the PC, but I know enough when I have a problem.

  Now, while I was with PC Cleaner Pro, I allowed a representative to take control of my PC to help set, and he went into the event viewer and showed me the error 1007 in

  the event viewer.  He told me that only a technician 35 Microsoft could fix tis problem.

  I would like to know how to solve these problems myself.  If that means classes or tests, I'm ready to get there!

  But for now, I just want to know how to clean and fix the errors in the event viewer

  So if you could tell me please small whet you need to me to help him with this problem, I'm ready

  It's really annoying tio do reinjstall windows every 3 months.  So if you can help, I would be very happy VERY MUCH!

  Sincreley,

  Joseph M Hart

  Errors and warnings in the event logs are not usually a sign of a major problem.

  Unfortunately, there are many technical support providers who refer clients to the event log in order to convince them to pay for questionable services.

  Use of cleaners and Tune up utilities is not recommended. They can often cause problems.

  Use the construct in Windows utilities

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Ensure that all remote access program is deleted from your computer.

  Use a search engine to find information on all the events that occur frequently, specifying the event id and source, for example search for "eventid 512 capi2. Try to avoid scam sites that are always asked by this kind of research. Stick to sites of Microsoft or somewhere like www.eventid.net which is a good source of free information.

• What is "agile basic error" and why I can't get rid of?

  I tried to place an order with the company of Melitta coffee. Everything is going well until I hit the "place an order" and then comes back the gibberish "agile basic error" and I cannot cross it, get rid of it, and I am never able to place my order.

  This is an error with the server of the Web site. Please contact website assistance.

• My 2013 series MacBook Air hot and slow or freezes when I'm on Facebook or Tumblr. In addition, the battery begins to drain. Why?

  Whenever I'm on Facebook or Tumblr, my MacBook freezes and runs hot and slow, eventually freezing. He also began to overheat, with maximum speed cooling fan and battery drainage. This only happens when I'm on these two sites since it rolls when they are not open. There is no problem in loading the computer or using other programs and Web sites.

  These issues have started only very recently, in the last week or so. What is strange is that for a number of programs or open tabs does not seem to cause problems, but once I open Facebook or Tumblr, the computer becomes overloaded (even if there are no other programs running outside of Safari and they are only two tabs open). Even YouTube does not cause the same effect.

  Help is very appreciated!

  MacBook Air (13 inch, mid 2013), OS X El Capitan (10.11.3)

  Hey there!

  What browser do you use? I had some problems of my own with Tumblr, Google Chrome, and power draining eventually led me to dump Chrome when I realized it was hogging all my resources. I recommend also to configure tumblr to show you your dashboard in the pages of 10 to 15 positions rather than scroll without end - in this way, he does try to keep everything loaded at the same time.

  You can also see your Mac activity monitor while you use these sites to get a better idea of how the power of the computer's processor and RAM are handling activity.

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• Application 'Tweed' increasingly greater and slowing down

  I noticed the wire of time that my request of Tweed becomes slower and slower.  I just pulled up the application information, and it's an enormous size 17 024 Ko!  Apparently, this isn't clear all that there is storage when it is downloaded from Twitter.  I tried to delete the account and re-adjusting upward, but that did not bring the size down.  It seems I have to remove the entire application from my pre and reinstall it.

  Anyone else notice these issues of size and slowness with Tweed?

  Hi Silvrdrgn36

  If you go into the menu of the Tweed application or any other application, there is a link to the support site or contact more details the author. I suggest that notify you these guys there on the issue - this is probably a memory leak in the code which they will determine if you can get the info.

  http://pivotallabs.com/Contact_us