[JS OSX running CS3 CS4 script problem]

Similar Questions

• Step 9 10 grille Installation Wizard - run root.sh script problem

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 with 2 Virtual Machines (rac1 and rac2 which BONES are Oracle Linux 5.6)
  and according to the tutorial http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  The virtual disk for each virtual computer is 20 GB which is/dev/sda raw device (the partition/dev/sda1 is the same size).
  
  In order to install the grid Infrastructure, I add 5 disks in the first machine virtual rac1 and 10 GB for each hard drive.
  Then create 5 ASM disks respectively as a disk group. Let me describe them as follows:
  
  OS Phyysical file: C:\VM_RAC\sharerac\asmdisk1.vmdk (asmdisk2.vmdk asmdisk3.vmdk asmdisk4.vmdk asmdisk5.vmdk)
  The corresponding raw device: / dev/sdb (SDC sdd sde sdf)
  Corresponding partition: / dev/sdb1 (sdc1 sdd1, sde1 sdf1)
  Corresponding ASM drive: ASMDISK1 (ASMDISK2 ASMDISK3 ASMDISK4 ASMDISK5)
  
  When I run the installation of grid step 5 of 8, I select all 5 ASMDISK as ASM disk group in the wizard.
  Clusterware files are supposed to be stored in the ASM disk group.
  
  2 virtual rac1 and rac2 machines must use the same ASM disk group.
  Here, I do not do anything about ASM disk group in the second rac2 VM.
  
  By operating step install grille 9/10, run the root.sh script in 2 VMS rac1 and rac2. The root.sh script runs successfully in the first VM rac1. But when the root.sh script is executed in the second VM rac2, the error message appears as follows:
  
  "... ...
  ORA-15018: disk group cannot be created.
  ORA-15031: disc "ORCL:ASMDISK5" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK4" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK3" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK2" specification is no disks.
  ORA-15031: disc "ORCL:ASMDISK1" specification is no disks.
  ASM configuration failed.
  Not properly configure and start the ASM.
  Failure of the initial cluster configuration.
  ... ..."
  
  The error message above, it seems to connect the second rac2 VM with the ASM disk group created in rac1 so that the 2 virtual machines use the same set of disks for ASM.
  
  But I don't see anything on the ASM disk group in the second VM rac2 in tutorial
  http://appsdbaworkshop.blogspot.com/2011/10/11gr2-RAC-on-Linux-56-using-VMware.html.
  
  My question is:
  
  Include any folk how to fix ASM disks in the second rac2 VM when run the root.sh script in rac2 on step 9 of 10 in the Setup Wizard?
  
  Thank you.

  Hello

  Shared storage is the requirement of the CARS. Check if you have shared storage on all nodes.
  Run oracleasm listdisk on Node2 to see if he can see the same discs on node 1. Otherwise you follow this tutorial correctly

  See you soon

• CS3 CS4 CS5 backward compatible or just backward?

  Have just spent more than a month to speak with Adobe "Customer Service" - a call center offshore which all appear to be reading from a script that says "Sir, I understand your problem" - really? "But all I can say is that buy you CS5" - I already had! -«Or visit our online community»

  More than a month - I can include the thread here - including telephone calls a dozen where I was sometimes hung up and where I NEVER talked with a technician who has really understood my problem.

  I have customer video projects that extends all the way back to CS2 first.

  When I upgraded from CS3 to CS4 (on PC) I was told 'start all my video projects from scratch' - which was the Adobe 'Customer Service' useful response team! It seems that Aboriginal media formats handles how CS4 is entirely not compatible with CS3 or earlier.

  Two months ago, I bought a suite CS5 Mac. Once again, my CS3 projects are not compatible, it seems. A month ago my PC is dead.

  I started a dialogue with Adobe 'Customer Service' seeks help.

  I own Production Suite or Master Suite in CS2, CS3, CS4 and CS5 - so I'm not a software pirate - and have a reasonable expectation that I should attract a certain level of support: more specifically, I would like to Exchange my PC CS3 to Mac CS3 software - seems to be the best way to run these older projects - BUT I would gladly take any advice you can provide!

  After more than a month, speaking with a range of people "Customer Service" from well intentioned but not trained to rude people walk in a straight line, I said go buy the software somewhere else!

  Adobe CS3 for Mac ships new from $ 800 to $ 1500 on eBay.

  Boot Camp is an option since I own CS3 for PC, but then I need to buy Windows and a parallel software solution - also about $1200.

  I want is no longer such an evangelist for IP - when it's the service that you get as a true customer of Adobe.

  I love using Adobe products but am disgusted by the total lack of service.

  Can anyone help?

  I will make 2 comments.

  First of all, this sounds like the nightmare of compatibility!  PC to Mac and CS3 CS4 are each of the colossal challenges.  If you can get this to work, it will be a marvel.

  Secondly, I am a new user of CS5.  CS3 for a long time, briefly CS4 on my old PC, and then CS5 on my new i7 PC.  Quickly, I came across an oddity just because I was DLing CS3 and CS4 PR projects in CS5.  Does not work.  But I opened each such project in CS5, prompted me for new name, saved those and DL had the new CS5 versions in the project of CS5.  But they had very little things other than video and edited at least.  Then, Jeremiah, I think that your approach is the right one.  Each DL element used in the project of 'old' needs to be high to CS5 before waiting for it to work.

  Matt, good luck!

• CS3, CS4 and CS5 Crash when clicking on.

  Hey, can't find anywhere better ask this question.

  2.8gz 4 GB ram imac running intel latest snow leopard.

  have all 3 installed indesign cs3.cs4.c5 tests.

  However as soon as the start screen has authorized, we arrive at the new document window.

  We can choose document settings, then the page is displayed in white as standard.

  then you click ANYWHERE in indesign and Flash freeze and have to force quit.

  all n software drivers are up to date and have erased the prefrences.

  any guy more ideas?

  see you soon

  x

  Well.

  Sometimes it's obvious what's going on, but usually it is not. In this case it isn't. But.

  I guess we can say that he is waiting for the system to grant him a lock to do something, but this isn't all that clear what who or why. Although it seems to be stuck inside the TIN_Disposefont in calls to SING. I don't know anything about TIN, other than a look of 5 seconds on his web page.

  But it seems that the problem has to do with fonts and Japanese who. I think that Peter above suggests that a font may be a problem.

  So, try to remove all of your Japanese fonts. And if that does not do it, try to delete all your rules policies. See if that fixes it. If so, then add their return in half until what refine you the one who kills. Don't forget, it's only log-base 2 number of fonts, so even if you have 1024 fonts on your system, it is only 10 demi-retrecissements.

• Opening documents InDesign CS3 CS4

  I hope someone from Adobe can help me with this question. Here's the scenario:

  I'm working on the support team in a prepress environment where we get hundreds of files InDesign customer provided per week. Some customers provide their files in InDesign CS3 and some provide files in InDesign CS4. We have two applications.

  From our experience, we found that if we open a document, InDesign CS3 with InDesign CS4, there is potential for the elements in the document. I don't know what is happening from 3 to 4 to cause this problem. This happened to us several times and we have experienced losses of money owed on the errors of the press.

  One could say, as we have, if the document is provided in InDesign CS3, working on it in InDesign CS3. Pretty easy, right?

  Well, not really. If you have CS3 and CS4, both as installed on your mac at the same time, simply by double-clicking the CS4 default file (because it is newer).

  We said to our operators that they need identify which version of the file was created is not the easiest thing in the world either.

  If you 'get info' on the file, you don't get accurate information. He can say "CS4", even if it's "CS3", I think it's because your system is reading the application newer than you have to install is.

  I found that by dragging the file to the CS3 icon in the doc, it will attempt to open the file in CS3 and if it is really a CS4 document, you will get errors in plugin and the file does not open. It works, but my 38 mac operators are so used to simply by double-clicking a file to open it, they sometimes forget to do it my way, and it is when we receive errors.

  Y at - it a plugin available that would make you, when double - click on a file as to which version he is or which version you want to open the file in InDesign?

  What has changed the Adobe in InDesign CS4, which would cause things to disappear or change when working on CS3 CS4 documents?

  Thank you in advance.

  This isn't an official Adobe support link. This is a user to user forum.

  This can help you:

  OSX.php http://indesignsecrets.com/Utility-opens-indd-Files-in-the-correct-version-of-InDesign-in-

  Bob

• If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds?

  Hello

  If I run the calc script to aggregate a BSO cube, it blocks and release each block in a few seconds? Or is it keep held locked blocks even after aggregation for this block is over?

  For example if I correct sparse dimensions Forecast, FY15, dec.  and my accounts dimension is only dense, after calc has my senior level members in the accounts, it it will issue after updating (i.e. in fractions of seconds) or is agg keep it held in a lock?

  I ask because I want to run scripts tot., but there is the update of our cube users.  I never had a problem to start agg, while users are updating.  But maybe I am lucky.  If a user updates a closed block, they will receive an error message that I think.  They may try to update again after a few seconds, I hope.

  Thank you.

  Locking behavior for BSO Essbase is described in the database administrator's Guide: http://docs.oracle.com/cd/E57185_01/epm.1112/essbase_db/dstinteg.html

  It is certainly theoretically possible that a user can obtain a lock because of a calc, although I can't say I saw him be a problem in real-world applications (perhaps because access uncommitted is the default).

• Cannot install CS4 Design Premium Adobe said b/c my CS3 CS4 serial number went from level is invalid

  I have a new iMac and downloaded Adobe Creative Suite Design Premium 4, which has been improved on my old iMac v.3.3.  When I start a trial of v.4 as suggested and ask for a version permanent by putting my serial number v.4, v.4 is downloaded. But, when I try to open the Photoshop application, I get a screen that says I have to put in the serial number for CS3 CS4 has been upgraded since then.  When I entered my serial number for CS3, Adobe indicates that the number is not valid and won't let me use the app HELP!

  Thank you for your help.  I solved the problem.  When I went back to look at the awkward screen, I found that I had chosen the right product. I then chose the right product and of course the problem has been resolved.

• CDF to run commands / Shell scripts

  Hi friends,

  I need help serious here regarding the CDF function.

  I created a JAR file to run batch/shell scripts via the calculation script.

  I tested the JAR file and it works perfectly well that run without the calculation script, but I get errors including in Calc script, I get the error message.

  Initially, the error was: error of Machine virtual Java and later, it is class not found.

  Here are the steps to register the CDF:

  1. place the JAR file in the location: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\udf\

  2. update the file udf.policy with the following statement:

  Grants all permissions to BatEx

  give the code "file:${essbase.java.home}/BatEx.jar" {}

  permission java.security.AllPermission;

  };

  3 restart the Essbase services.

  4. I am trying to create this function at Global level so no mention is not the name of the Application in the MaxL at registration:

  create or replace function '@BatEx' as

  "BatEx.

  Spec '@BatEx(Complete path in double quotes) '.

  Comment "Functions A CDF that runs the batch file in Essbase Server";

  5 this is the calc script:

  @BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat '; -It gives an error: error: invalid syntax 1012000 - not a command CALC [@BatEx]

  I tried another way:

  RUNJAVA @BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat '; -Gives an error: problem running [@BatEx 'E:/Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat']: [can't find @BatEx class]

  Where I am wrong here? Please help me out here.

  Kind regards

  RB

  Thanks much Amit and Jake! I finally cracked!

  Sad thing is that I have found no OTN correct information regarding function Java Custom, rather there was a lot of information about CDFs pre-existing provided by Oracle, so I decided to write a complete solution of CDF, where Java code too was created by the developer of Essbase applications.

  The requirement that I had was to trigger the batch file in the calculation script. Here is the detailed requirement:

  Update Variable of Substitution by planning web form.

  1. the user enters the data in the form of the planning web and saves it.

  2. the calc script attached to the web form, extracts data and records the flat file on Essbase server.

  3. earlier we were executing the script batch on the web server as the workflow will identify the lots on the web server and not on Essbase server, but after the development of this CDF to run the batch job, the batch files can be run directly Essbase server.

  4. the idea is to keep the user limited to the tasks list, so that it does not jump to the to-do list to SubVar web form, workflow and then return to the task list for a simple job to change SubVar.

  There were a few challenges that I encountered during the development of this JAVA function, namely:

  1 function CDF records do not : I tested JAVA code separately using command line and the executable Jar file will execute the batch, as expected. But I couldn't get why my CDF is not have recorded trace. After a lot of searching on Google and analysis, I found that it was the difference between the Version of JAVA (the JAVA compiler I used to compile and create my JAR file) and JAVA (JVM Essbase) virtual machine. I used JDK 1.7 update 65 to compile and create my POT so that the JVM used in the Essbase Server Update 1.6 is 35. I uninstalled JDK 1.7 of my machine, downloaded Update 1.6 35 archives of the Oracle and recompiled the code. Guess what! My CDF function was recorded first.

  So always check the compatibility of the Version of the JDK you used to compile and create the JAR file and JVM on your Essbase server.

  You can check the version of the JVM in console EAS-> EssbaseCluster-> right click-> Edit-> properties-> tab environment. There is a line that appears something like:

  ; JvmModuleLocation $J (EPM_ORACLE_HOME)-...-jdk160_35\jre\bin\server\jvm.dll (the bold is your version of the JVM).

  2. "main class not found" error after successful registration of CDF:

  I haven't had that one category of Public in my JAVA code and this error took me by surprise. I also checked the "public static void main" section in my code and everything seems to be OK. Please note that JAVA is case sensitive - 'hand' and 'Hand' aren't even in JAVA.

  I did some further research and one of John's response to a CDF request, I came to know that I need to include another argument (context) in the main section of my Java code and recompile with classpath "essbase.jar" (I will explain the controls in the next steps). I changed the main section of my JAVA code and included the argument:

  Public Shared Sub main (paramContext context, String [] paramArrayOfString)

  The following JAVA code to perform the batch in Essbase Server:

  import com.hyperion.essbase.calculator.Context;

  import java.io.BufferedReader;

  import java.io.InputStream;

  import java.io.InputStreamReader;

  import java.io.OutputStream;

  import java.io.PrintStream;

  public class BatEx

  {

  Public Shared Sub main (context, paramContext, String [] paramArrayOfString)

  {

  Try

  {

  String str1 = paramArrayOfString [0];

  LocalProcess process = Runtime.getRuntime () .exec (str1);

  InputStream localInputStream1 = localProcess.getInputStream ();

  OutputStream localOutputStream = localProcess.getOutputStream ();

  InputStream localInputStream2 = localProcess.getErrorStream ();

  BufferedReader in = new BufferedReader (new InputStreamReader (localInputStream1)) localBufferedReader;

  String str2;

  While ((str2 = localBufferedReader.readLine ())! = null) {}

  System.out.println (str2);

  }

  System.out.println ("package executed successfully.");

  }

  catch (Exception localException)

  {

  System.out.println ("error!:" + localException);

  localException.printStackTrace ();

  }

  }

  }

  Install the (compatible to Essbase JVM) compatible version of the JDK on your machine. Compile the above code by using the following command:

  C:\ >javac - classpath essbase.jar BatEx.java - please specify the path to the file "essbase.jar". It generally to the location: : \Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\

  The code should compile without any problem, and a .class file must be created with the same name.

  Now is the time to create the JAR file. Use the following command:

  C:\ >jar cf BatEx.jar BatEx.class

  Now the executable JAR file must also be created.

  Place this JAR file: : \Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\java\udf\

  Restart the service of Essbase and application (the only Application Restarting should work, but I didn't take any chances to restart both).

  Check the log of function CDF recording applications. The application log should be at the location:

  : \Oracle\Middleware\user_projects\epmsystem3\diagnostics\logs\essbase\essbase\app\-

  The CDF enrollment message should be something like:

  External function of [GLOBAL] [@BatEx] saved OK

  I used the following MaxL to register my function in Essbase:

  create or replace function '@BatEx' as

  "BatEx.

  Spec '@BatEx (StringArray).

  Comment "Functions A CDF that runs the batch file in Essbase Server"

  I used the following script to calc to run my CDF (fairly simple however):

  ESS_LOCALE English_UnitedStates.Latin1@Binary

  RUNJAVA BatEx "": / Oracle/Middleware/EPMSystem11R1/common/utilities/Test.bat ";" -Note: please replace with the name of the physical drive.

  I went and checked the logs that the Test.bat written and "wallah! The log file had some content and 1 KB in size. I deleted the contents of the log file and checked again, the result was the same.

  Hope this answer helps all of us who work on CDF that is clean.

  Please like this post if this can help you in some way.

  Thanks again to Amit, Jake and John for helping me solve this puzzle.

  Kind regards

  Amit Kumar Singh

• Can I upgrade Photoshop 7.0 for my MacBook OSX running?

  Hello. I have an old Photoshop 7.0 that I bought at the end of the 1990s that I can't install it on my MacBook OSX running. The installation of the said error 'PowerPC applications are no longer supported.  Is it possible to upgrade? It collected dust, but I remember paying a lot to get him out and hope that it is something interesting, but customers say that they won't support this older problem to answer my question.  I take a class where I would use it.

  No, it is not possible to use Photoshop 7 on a Mac modern or upgrade to a newer version. It is much too old.

  You will need to either buy Photoshop CS6 or Photoshop elements 13 or join the Cloud.

• How to run a Powershell script via a batch file

  I'm new on using Powershell and I have a fundamental question regarding running a powershell script. Basically, I wrote a file of commands as shown below.

  C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe - PSConsoleFile "C:\Program Files\VMware\Infrastructure\VIToolkitForWindows\vim.psc1" - NoExit-command "C:\MyScripts\RunSpanshot.ps1".

  I run the batch file and nothing seems to happen. What is the problem with trying to run the RunSpanshot.ps1 script as shown above? -any help is appreciated.

  Thank you

  You could do

  C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsoleFile "C:\Program Files\VMware\Infrastructure\VIToolkitForWindows\vim.psc1" -NoExit -Command "& 'C:\My Scripts\RunSpanshot.ps1'"
  

• Call the SQL of a script problem

  Hello
  I have a script for example query.sh:
  #! / bin/sh
  sqlplus-s ${ORACLE_USER} < < HIC
  set the position
  NewPage set to none
  
  SELECT 'ALTER TABLE' |' TEST_TABLE' | 'ADD PARTITION' |' P' | To_char (trunc (sysdate + 7), "IYYY"). » W'|| To_char (trunc (sysdate + 7), 'IW') | ' VALUES LESS (TO_DATE('''||) To_char (sysdate + 14, 'YYYYMMDD') | " ((', "YYYYMMDD")); "FROM DUAL;
  output
  HIC
  
  This will actually give me: ALTER TABLE TEST_TABLE add PARTITION P2010W46 VALUES LESS THAN (TO_DATE('20101122','yyyymmdd'));
  
  I'll do this output of the second script. for example create_part.sh
  
  #! / bin/sh
  
  SQL='/home/Bill/scripts/query.sh'
  
  sqlplus ${ORACLE_USER} < < EOF
  Set serveroutput size 1000000
  set the position
  
  $SQL
  
  output
  FO %
  
  
  When I run the 2nd script I get:
  
  SQL > SQL > SQL > SQL 2 > ALTER TABLE test_table add a SCORE from P2010W46 LESS THAN VALUES (TO_DATE ('20101122 ',' yyy))
  *
  ERROR on line 1:
  ORA-01861: literal does not match the format string
  
  I suspect that the output of the 1st script encapsulates a second line, and it defective runs correctly.
  
  East of Oracle 9i
  
  Please suggest a way to overcome this problem.
  
  Thank you in advance.

  In the first script, add the VALUE LINESIZE 1000

• Book Adobe® InDesign® CS3/CS4 SDK programming by Kris Coppieters

  Hi, I would ask if anyone knows if Adobe® InDesign® CS3/CS4 SDK programming Kris Coppieters booklet is available in ebook, since I could find only version printed on Lulu.com. Thanks for your help

  Maciej salvation,

  No, I never published my book in ebook. Don't know if it would be worth it - it's a terribly small market! I got my book up on Lulu mainly for my own use, like the note that I use when I run an InDesign SDK training session - so that I can quickly print some documents of good quality for my students.

  See you soon,.

  Kris

• After Effects CS3/CS4 Mac PC compatibility

  I use After effects to school and they work on PC (with the CS3 version). At home, I'm working on a brand new iMAC OSX Leopard (with CS4). After effects in Leopard recognizes the file I started working at the school. But if I work on it on my iMAC, when I open the files in After Effects on school PCs, it does not open. Is there anyway to get the compatibility of both sides?

  Caroline

  The question is not cross-platform, it's between versions.

  After effects is not backward compatible (projects saved in a newer version cannot be opened in an earlier version).

  The school has to update CS4, or you need to install CS3 at home and to maintain the parity of version.

• CS4 installation problem: Flash/Dreamweaver/Fireworks does not open

  Hi, I was wondering if someone could help me. I want to install Design premium CS4 on 32-bit Windows Vista. The installation goes by apparently fine, but then when I try to open Dreamweaver, Flash or Fireworks it evokes error message saying

  "The application is not initialilze properly (0xc0150004)" with these details

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Flash.exe
  Application version: 10.0.0.544
  Application timestamp: 48 c 73089
  Fault Module name: ntdll.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e03821
  Exception code: c0150004
  Exception offset: 00009eed
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 2057
  Information additional 1: 9 day 13
  More information 2: 1abee00edb3fc1158f9ad6f44f0f6be8
  Information additional 3: 9 day 13
  Additional information 4: 1abee00edb3fc1158f9ad6f44f0f6be8

  All other programs work fine, it's just who does not even open. I tried to reinstall in all different directions that I can think of, without AV, MS SQL and IIS cut, office with selective startup, you name it and it still has the same problem.

  Can anyone help me with what could be the cause of the problem? don't know if its a problem installation or a problem of windows (a setting or something) but I would really like to have ideas anyone might have.

  Thank you

  Tom

  Oh yes, when I look in install also newspapers, it evokes this error

  ERROR

  Journal of: object

  isRunning {string}: 0

  percentComplete {string}: 100

  message {object}: [object Object]

  Journal of: object

  {string} code: 0

  args {object}: [object Object]

  which I think refers to the installer of freezing when you check the profile of the system during installation, but it seems to go through install well. It also has the following errors.

  ERROR

  The payload with AdobeCode: {35304775-CB5F-101B-A142-83B5468C225C} demanded dependence on:

  Family: InDesign

  ProductName: Adobe InDesign CS4 icon Manager x 64

  MinVersion:

  This dependency is not satisfied, because this payload is x 64 and is not supported on this computer.

  Removing this dependency of the list. Product may work correctly.

  Had the same error, try to run Dreamweaver CS4 on my Dell Studio XPS laptop:

  This sorting me and works fine now:

  2. use the registry (Regedit) editor to locate and expand the following registry key:

  'HKEY_LOCAL_MACHINE\COMPONENTS\DerivedData\Components\ '.

  4. from the long list on the left, remove the following key:

  'x86_microsoft.vc80.mfc_1fc8b3b9a1e18e3b_8.0.50727.762_none_0c178a139ee2a7ed '.

  Then uninstall, reboot, and install

• CS4, script files appear not in the script Panel

  Never use scripts, but I had one that I downloaded for use for CS3.  Its been a while but I thought that I it falls right in the Scripts folder and it should appear in the actions panel in InDesign.  I just put this same script in my new CS4 scripts folder and his does not.  I restarted same ID to ensure, and it still does not work.  Is there something im forget?

  CS4 has a slightly different model.

  In the Scripts folder, there is a folder called "Scripts panel". Script view in the actions panel in InDesign, place your scripts in this folder inside.