Just bought a Deskjet 3520 e-all in one printer but moving to the United Kingdom, can I still use it?

Similar Questions

• HP Desktop 3520 e-all-in-one: Deskjet 3520 e-all in one printer does not print not black ink

  I just installed a new black cartridge of hp 564xl with an expiry date of 30/01/2017. Low and behold the black is not printing and the printer was bought in 08/2012. I did everything what was proposed in the support forums and nothing helps nothing worked. The three other colors print fine except the black. Based on the responses of everyone I guess that there is no compensation for her and I should scrap this device after three years of constant use. I think from now, there will be a solution to this problem, but Hp is not us.

  I am using HP printers because I bought my first computer in 1992 and never had any problems with them so far.  My second printer that was bought in 2004 still good, except that it is not wireless.

  If I need to buy a new printer wireless, I am sorry to say that I might have to watch the competition.

  If someone knows a solution that I would be grateful.

  The next step is to contact HP.  Even if your printer is no longer under warranty, they may be able to provide a solution.  After you contact HP post back here with the results please.

• Can my HP Deskjet 3520 e-all-in-one printer/copier/Scanner "scan to file"?

  All HP printers/copiers/scanners scan so I can create a file on my laptop for what is copied?  I think buying a refurbished, given that all previous HP scanner/copiers/printers worked without problem.  I replaces one that I bought about 9 years ago. Thank you!

  Hello

  Scan and copy are two different functions: to the scan function, you can save scanned images/files to your computer and to copy funtion, it copies and gives you on the discharge papers. Back to your question: Yes, it can create and save files to your computer using the scan function.

  Kind regards.

• HP Deskjet 3520 e-all-in-one: SCAN not SCAN SINCE the INSTALLATION of WINDOWS 10

  My printer will not scann after installing windows 10. I can print and copy. I tried print and scan the doctor. But I stop serching after a few seconds and goes no further after waiting in several ouhers.

  Afternoon @Gittelone,.

  The information I've found can help you with scanning on Windows 10.

  First, you must consider the information contained in these resources.

  • Guide to upgrade Windows 10 for HP printers
  • Compatible printers Windows 10

  If you printer software was installed before your upgrade, I try to uninstall the software completely and then reinstall it by using the most recent driver available on the HP Web site. Here's how to clean all the drivers of your computer.

  I recommend referencing the steps described in this document to make sure that you haven't missed anything whatsoever; Uninstalling the printer software - use as a rough guide, but the steps for Windows 8 should be pretty close to Windows 10.

  You can also delete files using disk cleanup - take care to put check marks in selection boxes when it is available. (Once again Windows 8)

  Software drivers can hide other places would be in your device manager.

  To open Device Manager:
  1) enter the Device Manager in the search field.
  2) click on Device Manager.
  (3) you can click on View, in the upper part of the windows, click Show hidden devices.
  (4) to develop the types of devices and check for any pilot associated with your printer.
  (5) to remove a device from Device Manager, click on the name of the device in the list and then click Uninstall.

  For more information, see for Windows Device Manager information 8/10.

  Download the newest software package here; HP Deskjet full feature software and drivers

  Or download from this link.

  Then look for the updates of Windows; Drivers and software with Windows Update (Windows Update 10, 8)  

  If the problem persists, you can also try to use the HP Scan and capture App instead if necessary. 

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• DeskJet 3520 e-all-in-one: How do I install the printer deskjet 3520e ink cartridge

  I have a hp laptop touchscreen and I do not remember how to replace the ink cartridges. Please help! l

  Here, the video shows how to install a printer Deskjet 3520e ink cartridge.

• Paper jam in the printer HP Deskjet 3520 e-All-in-One (model SNPRH-1102)

  I had been using HP Deskjet 3520 e-all-in-one printer over a year until yesterday the printer suddenly jammed paper. I have some ideas out of A4 paper to let the printer works normally again. I need printer for printing currently. Please help, anyone here.

  Hi Lsyj,

  I can help you with the paper jam, you have experience. I found the following document that will guide you through the steps needed to solve the problem; A "Paper jam" message on the control panel.

  I hope this helps.

• All the Apps for HP Deskjet 3520 e-all-in-one

  are there apps on the eprint centre which will focus on my HP Deskjet 3520 e-all-in-one

  You will not be able to add apps to the printer.

• I have HP Deskjet 3050 a all-in-One Printer - J611g and need help with printing, please?

  I just bought the HP Deskjet 3050 all-in-one printer-J611g a. The manual has shown to do the printer double-sided printing odd pages then only print even pages only, and it works very well for one page on one side of the sheet. However, when I want to print two pages on one side of the paper and another of two pages on another aspect of the sheet, print the odd pages or even pages only just does not work! Ditto to print more than one PowerPoint presentation on one side of the page, if I click on print the odd pages only, then the printer will display the odd number of powerpoint slide instead of print odd number. I used to have another printer HP Officejet and never had any problems with two-sided printing. This printer comes with the function double-sided printeing at all?  If so, how can I do duplex printing?

  Thank you very much!

  This is a limitation of the software that you use and how the HP printers recognize the incoming files. When compress you multiple pages on a single "page" this page is actually two pages, with even and odd numbers. It is therefore difficult for the software to determine the page numbers 'odd' and 'even' when printing, because it is no longer applicable to the relevant pages, but the format in which they are being printed.

  I hope this information is useful!

• I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  I bought a WF-2650 epson all-in-one printer and am trying to find a replacement for QuickTime so that I can download a video. I have a MacBook Pro computer. Where can I get something instead of QuickTime?

  Can you explain what a printer has to do with the download of the videos?

• I have a Photosmart C6150 all-in-one printer and too HP software. I can remove it?

  I have a Photosmart C6150 all-in-one printer and too HP software.  I can remove it?

  I have HP customer Participation Program 7.0 (245 MB), HP Document Viewer 7.0 (3.09 MB), HP Imaging Device functions 8.0 (2.44 MB), HP Photosmart all-in-One software 9.0 (15.65 MB), HP Photosmart Essential (11.15 MB), HP Photosmart Prime Software 6.5 (245 MB), HP Photosmart, Officejet and Deskjet 7.0.A (44,35 MB), the HP software update (3.42 MB), HP solution Center 7.0 (3.09 MB). (see screen capture below)

  

  Hello

  It is to your liking, in fact BUT in the list if you want to use all functions, you must keep all except 'Participation program.

  Kind regards.

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Just bought a new all in one printer but when I try to scan something I get the error message "JIT debugging of unhandled exception message."

  original title: help needed please...

  I recently bought a new all in one printer and now whenever I try to import something I scanned into my computer in the graphics of MY CRAFT STUDIO program all that I get, it's the exception message not support JIT debugging.

  I tried to disable in Internet Options, but he did not make a difference.  Any help will be greatly appreciated

  Contact support or ask in the forums of the LIM printer software or seller.

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).