Just reinstalled firefox on a new build computer and whenever I try to play a youtube vid I get a black screen, the vid seems to indicate in html5

Similar Questions

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• I recently downloaded firefox on my new laptop computer and it's annoying to have my research redirected, constant ads popping up telling me to install the software.

  I do not understand why this is happening, but I don't have time to constantly close popup windows and redirects, I can always go back to my old browser, Google Chrome, but I wanted to support Firefox. Why can't fix you it on your side?

  Hello, you have a malicious this addon in your firefox profile. Please, try the following steps:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to the firefox menu

     

     > addons > extensions and where there are still extensions listed there, disable them.

  3. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software

• I downloaded LR6 to a new HP Pavilion computer and when I try to change in developing all I get is a blue screen. Photos are .dng when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the re

  I downloaded LR6 to a new computer HP Pavilion. 10 windows and when I try to change in developing all that I get is a blue screen. Photos are .dng but when I click on the before / after button, I get a partial view of the picture and the part is still the blue light in the rear section. When in the module library, photography is able to be seen, but as soon as I click on the development, I see a flash of the photo and then the screen is all blue where I would like to see the photo. I opened both the old and the new computer and against each element and they are identical with the exception of the blue screen. I wonder if it has something to do with the magnifying glass?

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• from vista, I get a black screen, the system works I just can not see

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I tried to re start my computer when I did try to go back but there was only a black screen and it won't go in my log on page, or do anything else that, to go to safe mode, what's wrong with it? What can I do?

  I just got this computer and I don't want it to be a virus

  Hello

  If this is a new computer, you should contact the manufacturer of the system of support and/or whoever you bought
  calling blackscreens on the new equipment can be very serious. Not likely to contain a virus (malware) Although
  It is possible. More likely to be material questions and/or driver. The fixed under warranty. Black-
  the screens can be very difficult to resolve and more you do the more it will claim that this is something
  you did it.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Firefox crashes whenever I try to play a YouTube video

  Hi all.

  I had an annoying problem since this morning. I am able to view the homepage of YouTube, but whenever I try to watch a video, the player will work for a short period of time, usually a few minutes - and then Firefox will freeze. A minute or so after that, I get a crash report and Firefox crashes. Here's the error reports generated since that began:

  Date of the ID report
  BP-b766f314-91ca-4B6D-a3d2-732872151004
  10/03/2015-20:26
  BP-aa6f1e09-94f5-4462-8c60-e1d422151003
  05:50 10/03/2015
  BP-b48330ab-55e4-452C-B026-3a2082151003
  10/03/2015-02:58
  BP-ce1b0f3e-eb21-464c-9F0D-1098f2151003
  10/03/2015 01:49

  It's only Youtube that gives me problems. I tried Twitch and Hulu and each site performed normally. YouTube seems to work very well since I was able to access it on Internet Explorer without any problem. I ran Malwarebytes and McAfee scans since this morning, but the two have developed own.

  Any thoughts?

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• My computer stopped the update since October 23, 2010, and whenever I try to check for popular update, I get the number of error code 80070490. Help, please!

  My update of the computer window stopped updating since October 23, 2010 and each time I tried check the update popular I get the error code 80070490. Help, please!

  Hello

  questions have already been addressed here in my 1st reply:

  Please read the answer given

  Here is the solution for your problem of MS

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

  My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during Setup after loading files? Configuration
  ZOTAC GE Force GTX 670
  PSU Antec 900 W
  Intel core i7 - 3770 k
  Card Asus P8 Z77 - Mother V PRO
  WD 2 TB hard drive

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• If my previous laptop crashed, how can I reinstall Lightroom on my new laptop computer?

  I can't find out how to reinstall Lightroom on my new laptop computer.

  Help, please!

  Install the application of cc on your computer desktop, https://creative.adobe.com/products/creative-cloud and use it to install your lr cc.

• I have 6 LR on my desktop and notebooks (as the license allows). Just got a new laptop computer and uninstalled the old laptop, but now I get the error that I have to disable a computer before I can activate on my new machine. How can I disable an instanc

  I have 6 LR on my desktop and notebooks (as the license allows). Just got a new laptop computer and uninstalled the old laptop, but now I get the error that I have to disable a computer before I can activate on my new machine. How can I disable an instance that has already been uninstalled? Thank you!

  You are now logged for all activations.

  You can activate (sign) on 2 installations simultaneously.

  Let me know if you still have a problem.

• I downloaded iTunes on a new laptop computer and he allowed. First of a süden, I can't sync my iPhone 6. What can I do?

  I downloaded iTunes on a new laptop computer and he allowed. All of a sudden, I can't sync my iPhone 6. What can I do?

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  I have baught a new portable computer and you want to install windows vista (32-bit) on a bootable partition that it will be possible to do it with windows 7 (64-bit)

  the laptop contained Home Basic windows 7 (64-bit) and I want to install windows vista Home premium (32 bit) on a bootable partition that it will be possible to do or tell me the parallel method to move a certain 32-bit operating system...

  I do not understand your question. If the laptop can run Windows Vista, it can probably run Windows 7 too.

  To run Windows 7 64-bit, the processor must be a minimum Core 2 Duo.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

• I have a new mac computer and want to transfer my creative cloud that contains lightroom & photoshop from a PC to a MAC. How can I do this?

  I have a new mac computer and want to transfer my creative cloud that contains lightroom & photoshop from a PC to a MAC. How can I do this?

  Sign in using your adobe id and install cc on your mac desktop app, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your lr and ps.