KB971486 fails to install on Vista 64

Similar Questions

• F4580 - failed to install on Vista (AMD)

  The installer on CD fails repeatedly (disappears without error message) just after accepting the terms and conditions for installation. Then, I downloaded the drivers. This installation is faster, up to fail at the same point in the process.

  I installed the program on an XP laptop but am not able to install on the computer that will normally be used.

  I followed PrintDoc instructions on the message "F4580 - WiFi works on Vista but not XP?" that partially solve the problem successfully. Nevertheless, it still I cannot install any programs offered by HP.

  I looked not again for a work around for scanning.

  Any ideas?

  The installation is now complete. It is made with the help of assistance to the HP Spain homepage. When they got in touch with me yesterday, I emailed the zip file I downloaded the day before. They me sent instructions this afternoon:

  1. Uninstall all printer software.
  2. Remove all the entries in the HP folder in "Program files."
  3. Use the uncompressed version % TEMP % of the file.
  4. Use "Uninstall L4.bat" (in the ccc folder) to remove any remaining software, registry entries.
  5. Run the installer to the folder %TEMP%.

  The installation worked correctly. Everything that had blocked it was probably eliminated with "uninstall L4.bat.

  Thanks to the in-home PrintDoc, DexterM and HP Spain

• communication manager fails after installing vista 64 sp1__

  communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Update KB971644 fails repeatedly to install on Vista 32 bit system

  Every day, I notified of an update recommended to my system, (update KB971644 in particular) and every day it fails to install. Sometimes I get an error message which is recommended to visit the homepage of Install Shield, but I get no response here. (the error code is no.-3). The update is only about 6 MB, and I know I have enough hard drive space. I tried to clear my cache, cutting off the firewall and even leave the virus protection software. Don't know what else to try to install this update! All other updates installed, and I have all the Vista service packs installed and running courses. Thank you.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You receive an error message when you install the update?

  Try to disable all non-Microsoft programs and try to install the update.

  Update KB971644 is the platform update for Windows Vista, it contains the following updated technologies:

  Windows Graphics, Imaging, and XPS library
  Windows Automation API
  Windows portable devices platform
  Ribbon Windows and Animation Manager library

  Updated Windows program malfunctions if none of the non-Microsoft programs interrupts the installation updates.

  If you want to install this update and then, try the steps below.

  Reset windows update components.

  To reset the windows update components visit the below link and click repair button / follow the steps to fix it yourself.

  http://support.Microsoft.com/kb/971058

  Now try to install KB971644 update from windows update.

  For more information visit http://support.microsoft.com/kb/971644

  You can check the link below.

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Vista SP2 (and Net framework 3.5 Family update) fails to install

  Hi, Windows update always fails to install Vista SP2 & Net framework service pack 1 & family update Net framework 3.5 with error code 80073712. I believe that I have now installed the Net framework updates to download and install them individually or in sequence with NDP35SP1-KB958484 - x 86.exe the last to be installed, apparently with success. Unfortunately, Windows update still lists this update as needing to be installed, and that fails to do so. SP2 fails to install with updated Windaows as well, so I downloaded and installed as described in the Article ID: 947366 - last review: June 3, 2009 - revision: 6.1 how bad turn Windows Vista and Windows Server 2008 service pack installation issues, install the tool available to update Windows KB957821 system successfully, restart the PC , the deactivation of all the components of McAfee, but again error: ERROR_SXS_COMPONENT_STORE_CORRUPT (0 x 80073712). I'm open to suggestions as to how I can solve 2 problems. Thank you

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get this error code 646 everytime I go to install the important updates. Updates failed to install. Have: Windows Vista editions Home Premium and laptop Toshiba Satellite. How to fix?

  For about 4 days, it says install important updates, I try and it manages not to install message says to try again, and he still fails to install important updates.  When I turned off my computer, the message says installation step 1... 2... 3..., but still, it will fail to install.  I never had a problem with it before.  Last week, I started having this problem.  It will not install updates importamnt.  Please help, I need to install my updates.  Thanks in advance.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Failed to install Vista SP2 on T61

  I tried to install the Vista SP2 on a T61 running Vista business with SP1 installed.

  Windows Update says it installed OK, but when machine restarts to configure update fails to say that "some changes is not passed, returning from the changes.

  Can someone help me with this problem.

  Thank you

  Mick

  I solved this problem after trying to install the Vista SP2 about 7 times.

  So, if anyone has the same problem. I turned of my wireless network and SP2 installed without any problems.

• Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663

  WindowsUpdate_80070663

  Windows update fails to install service pack 3 for windows vista because of this error WindowsUpdate_80070663 if anyone can help me I would appreciate

  Hi Juan CarlosPatlan,.

  Windows Vista has only two service packs. You'll find the troubleshooting steps in the links below useful.

  Reset the Windows Update components

  System analysis tool

  Cannot install updates

  Troubleshooting of Windows Update (same steps for Vista)

  If you are unable to install the updates, provide the following information:

  • The full version of Windows you have installed
  • KB # the update fails
  • The troubleshooting steps you have tried

• Pure install Win Vista x 86 HP KB2079403, KB2479943, KB2536275 (fail 0x800B0100) and KB2536275 (not 0x8007065E)

  Clean instal Win Vista x 86 HP on new SSD now in SP2. The material is a Medion Q6600 on mother MSI7366 and NVidia GeForce 9300GS map.

  Will not install KB2079403, KB2479943, KB2536275 (fail 0x800B0100) or KB2536275 (not 0x8007065E).  Suggestions how to proceed?

  I tried each individually - how know one gives what error.

  Run Update Readiness Tool and it says everything is OK. You run MS Baseline Security analyze and downloaded packages individual but can not understand the correct syntax to invoke manually by hand using pkgmgr. I'm stuck with a new installation of Vista precarious missing 4 critical fixes :(

  I could go back and start from scratch, but I think I'll finish exactly in the same place again. Have also tried AV scans of bootable CD made on another system of trust and found no evidence of malicious software with three different products.

  Is it possible to get the best diagnosis of update of windows beyond "failed with unknown cryptic error."

  Any ideas what these patches have in common, which causes them to fail on my kit?

  Thank you

  Martin Brown

  Thank you very much! These well made the case.

  I had not had as much as to put on an AV so that it was not to blame. I have no idea why Windows Update had taken against these specific fixes - they work OK on the hard drive.

  They all performed successfully, according to the newspaper.  But I came to be stuck with a 'respect' in the automatic mode of updates for the last KB2536275 tag applied. He thinks that the patch should always be applied (and running it still does not work).

  Correction - it takes the system a heck of a lot of time to notice that the patch is applied and removed from the list (at least 2 reboots and the time it took me to write this letter) to do. Now, everything is good on the SSD and a nice green checkmark shows that there are no outstanding update!

  Thanks again it was exactly what I need.

  BTW How did you find these .msu files? When I went before all I could find were cryptic and opaque. CAB files with names absolutely inpenetrable, my question at the beginning was to know how to apply them as pkgmgr syntax is not really obvious from the help page.

  They are much more user friendly they are autonomous and run after the download.

• kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

  Original title: kb2633171 security update will not install windows vista

  Hello

  as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.

  I ran the fix it and aggressive to solve this problem, no luck :-(

  any help muchly appreciated.
  Thank you!

  Chiara

  Hi Chiara,

  Try following the steps in the following article.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   

  Let us know if it helps.

• Windows Vista Service Pack 1 (KB936330) fails to install error code 80073712

  Windows Vista Service Pack 1 (KB936330) fails to install, get the error code 80073712. What can I do to reslove it? Have tried everything help section offers any avile.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366>

  UTC/GMT is 03:21 Tuesday, January 10, 2012

• Vista sp1, all updates fail to install including sp2. error code 80070490

  I am running a Dell Inspiron 1521 with Vista sp1, all updates fail to install including sp2.

  I ran set and recommend solutions without success.

  Security updates fail with error 80070490, sp fails with the message installation fails.

  Recommendations of the solution please!

  Executed updated system preparation,

  Vista came installed on the laptop so I don't have a DVD that I can run repair with.

  Hi Norman,

  Unfortunately, you may not be able to repair Windows by using the features of normal repair since you do not have a disk. You may need to contact your hardware manufacturer to see what options they have to repair Windows.

• I have windows vista and are currently trying to install an update of microsoft KB2507938 give my code error 8024200d tried several times but fails to install I need some please

  I need help with one of the Windows Update will not be installed and gives me the error code - I tried to install several times but he says fails to install - thanks phil

  Hi firoz909,

  Install the system update tool and then install the update failed.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2