Keep primary data with shared connections to the server

Similar Questions

• Security Server cannot connect to the replica to connect to the server

  
  Hello

  I want to set up two security servers. Each connected to a login server.

  The installation of the Security Server works only when I connect to the backend connection.

  Telnet using port 4001 to replicas login server does not work. (from the Security Server)

  On the login replica server firewall rules seems to be OK.

  Who can help me here?

  Jan Willem

  It certainly works. Have two security servers, each associated with a connection to the server (for example a standard and the other a replica) is a very common scenario.

  Double check the rules in your firewall if you have an external firewall between your security servers and connection. Check for the setting procedure Administrator's guide matching password etc and for matching Security Server Troubleshooting section.  Make sure that the two security servers are configured the same (no group political advertising strategies of firewall different, firewalls running on all servers etc..). Make sure that the two connection servers are configured the same.

  Let us know what it was.

  Mark

• I can't download photoshop elements because it keeps saying 'you're not connected to the internet.  Well, if I'm not how did I get this far?  No problem with Safari or Mail.

  I can't download photoshop elements because it keeps saying 'you're not connected to the internet. Well, if I'm not how did I get this far? No problem with Safari or Mail.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Windows MCE and connect to the shared directory of the server

  Well, I know it's more a matter of Microsoft than a Qosmio question, however, I think that it is better to ask here among others who can actually thought it out instead to pay $95 to Microsoft to answer a question which ought to be established somewhere anyway.

  I have a LAN in my house with several password protected Windows 2003 servers. I do not use a domain system because I've never been fond of roaming computers that belong to a domain.

  I prefer also to encrypt and password protect files on my computer using PGP disk password protect the machine itself. After all, my son likes to watch his cartoons on the computer and at the age of 3, type a password of 8 characters with high, low, numbers and signs of punctuation is a bit out of reach for the moment.

  So now I have bore you with all rebuttles to questions like "Why don't you do this rather", Let's get to the meat.

  Is anyway in Windows XP Media Center edition that when I connect to a shared directory on the server using Windows file sharing (SMB/CIFS), I can choose to save the password?

  Dialog box, I have in mind is the one marked 'Connect to' that appears to request a username and password when a UNC network path is entered directly in the Explorer address line or the path is traversed through "My Network Places" and permissions are insufficient for with the users currently logged in user name and password combination.

  This feature exists on XP Pro, but not on the House and I was under the impression that Media Center was closer to Pro home. If I can't find a solution to this, so I have to install XP Pro on the machine and not the Media Center extensions and this will make me really sad :(

  Thanks in advance

  Hello

  Well, I put t know how you want to watch the video files with the Windows XP Media Center from the file server, because I don t know if the WMC supports this feature.
  But if he finds an interesting site on a simple file sharing on Windows XP Home Edition and Windows XP Pro.

  Please visit this link:
  http://www.practicallynetworked.com/sharing/XP/filesharing.htm

  Hope you find the solution. Please let me know.

  Good bye

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• Connection to the server would not check when you configure Outlook Express with Charter Web Mail

  Hello! I call on my Outlook Express is installed on my Windows XP Professional. I need assistance with the configuration of Outlook Express with my Charter Web Mail. Charter, I called and they helped me with the setup but I'm stuck on the last part and it gave me an error on the server. The "connection to the server don't check not" and the Charter was not able to help me through, and they said it's a Microsoft Issue. I need some help here. Please help me! Thank you!

  See here: http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1241

  There are step by step instructions.

  Steve

• How to get my box to connect to a server to connect to the server. With the help of 2002 XP pro service Pack 3

  What should I do to connect to a server to connect to the server. I use XP pro 2002 Service Pack 3.
  At this point my XP Pro SP3 2002, area has several parameters of user accounts in the box. The journal of users on the box, not the server, how can I remove accounts in the box to allow the server to ask someone that starts this box to connect to the server?

  Hi KevinB56,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the Sub forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access shared files whne connected to the server

  Original title: dfs namespace access

  We have customers from windows 7 on windows 2008r2 domain. We have a couple of file hosting a dfs servers space names with file shares.

  This server hosts a common \\namespace\fileshare that is still available however 2 other \\namespace\share1 & 2 return cannot access this share when you are not connected to the server. This does not affect any clients, but affects enough that it becomes big problem being the only customer resolution of reconstruction. I tried adding and removing updates. I am at a loss what to try next.

  Any suggestion would be great.

  Thanks Mick

  I found the solution myself after a lot of googling and journal of trace events.

  After you configure wsus, it appeared that our Windows 7 clients suddenly received file sync (small green icon in the taskbar) couple this with an intermittent slow wan link. The fix was all right before you disable offline files. We never wanted their first place very frustrating, but we're still learning.

  It doesn't seem to affect all clients which is what got us thrown away but hey its works now.

  Thanks Mick

• With both internal customers and external view of the Horizon, I do * have * to have at least a connection to the server by type of connection?

  If I want both external and non - VPN and LAN users internal to access desktops from view, I need to have a connection to the server dedicated to external users and another for internal? Right now I have one pair of Security Server-connection to the server and external connections work fine, but the internal connections are not. I have to get up at least a connection replication server and change the URL HTTPS Secure Tunnel for internal users only?

  Apparently, you don't need a connection to the server dedicated to internal users if you also external users and a security server. I found this during my troubleshooting. The URL of security server will be configured as administrator mode that external URL can be resolved and accessible while the URL to connect to the server will be configured with a URL can be resolved internally and is accessible in administrator mode.

• Problem with creative cloud update - no connection to the server

  Creative cloud on my PC (Windows 7) trying to update to the latest version. Download update stops at 2% with the statement "connection to the server. My firewall and antivirus BITDEFENDER are disabled. I installed Creative cloud on my PC and my laptop (Windows 8). On both platforms, I got the same error. Creative cloud is not able to update. Someone at - it an idea, what could be the problem?

  Hi Christian,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

  Hi guys,.

  I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

  "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

  A few details:

  My client's IP address is on the same subnet as the view connection server

  There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

  C:\ > nslookup X.X.X.172

  < resolves very well >

  C:\ > nslookup dd - view.viewdomain.com

  < resolves very well >

  C:\ > nslookup dd-notice

  < resolves very well >

  C:\ > tracert X.X.X.172

  < works great >

  If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

  I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

  My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

  LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

  I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

  Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

  VR,

  Brian Whyte

  Political of McAffee HBSS blocked 443 attempts out of the customer to view.

  The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.

• Adobe installation crashes with "trying to connect to the server.

  I hit the download button for Photoshop, which downloads a file "CreativeCloudSet - Up.exe" on Windows 7.  When I run it, it hampers is with "trying to connect to the server...". ».  I tried the tips 'troubleshoot Creative cloud download and install questions', there included connectivity test questions (three URLS for server access work directly in the browser, i.e., there is no proxy).  There is no other error message.  Where should I go from here to debug this?

  Found the problem with the proxy settings.  Debugging instructions above shall include the evaluation of the parameters of proxy (true/false).