Kernel error NT 1256 and vturr.exe

Similar Questions

• Error number: 0x80072EFF; Fixes for Win32 and svchost.exe generic

  I'm trying to solve a problem of message and svchost.exe error Genereic Win32 and need to update windows but get an error number: 0x80072EFF, an inability to connect to the server/website updated.  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Any help would be greatly appreciated.

  I am running WinXP SP3 on a desktop computer that came pre-installed with Norton in 2005 but has fonctionnee McAfee for at least 3 years now. The firewall is through McAfee.

  Assuming that the computer is not infected, the following should solve your problem from Windows Update:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now make this triple McAfee fix & restart: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NB: You have already downloaded step 2 remove the fix tool in my # 1 step b above.

  5. now to reset Windows update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer only;] Run the difficulty in the default and aggressive modes]
  http://support.Microsoft.com/kb/971058

  6. restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• HP Pavilion Notebook: Mfc120u.dll AcceleratorSt.exe - system file missing error and BTServer.exe - Application error

  I get the error message "system error AccelerometerSt.exe) mfc120u.dll is missing.  I was not able to find a reference to this dll missing accurate regarding the AccelerometerSt.exe.  It seems that the AccelerometerSt.exe is the HP 3D DriveGuard software.  In my view, that an update has been installed.  How can I fix this error?

  And also I can find an Application error error - BTServer.exe

  Please give some solutions to this problem...

  Hello

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  Once done, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Yet once, once done, reboot the laptop.

  Kind regards

  DP - K

• When I try to log on my "HP Pravillion 553w" userinit.exe Application error comes up and asks me to click ok to terminalte request. What can I do to connect to my computer?

  "When I try to connect my computere"HP Pravllion 553w"userinit.exe Application error comes on and says" application failed to initialize, click on ok to terminate the program. I just want to open a session. I don't know what made it? can someone help me please.   Georgia

  Hi, Georgia,

  This could be a limitation of the fast user switching feature.

  The fast user switching feature may not work if there is insufficient computer resources to create a new Winlogon service thread. When there is insufficient resources, the system may stop responding (hang), the system may lock up computer or the user may receive a Userinit.exe error application and the following error message:

  The application failed to initialize properly (0xc000012d)

  Method 1: In these cases, some users must log on to the computer, or you must close some programs to free up the resources of the computer.

  For more information, see:

  A discussion on the availability of the fast user switching feature

  This problem may also occur due to registry settings incorrect shell.

  Method 2: Try the steps listed here.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  To resolve this issue, follow these steps:

  a. press CTRL + ALT + DELETE and then click Task Manager.

  b. on the file menu, click new task (run...).

  c. type regedit and then click OK.

  d. in the left pane, look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  e. in the right pane, double-click Shell.

  f. in the value data box, type Explorer.exe, and then click OK.

  g. in the right pane, double-click Userinit.

  h. in the data value box, type %windir%\system32\userinit.exe and then click OK.

  Note The %windir%\System32 placeholder represents the path of the Windows folder. By default, C:\WINDOWS is the path of the Windows folder.
  If you type an incorrect value in the value data box, you cannot connect to the Windows XP-based computer.

  i. exit the registry editor.

  j. restart the computer.

  Check if this can help you.

• Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information DRIVER_POWER_STATE_FAILURE. The error code is 0x0000009F (0 x 00000003, 0x86f692e0, 0x86f692e0, 0x865a6598). BlueScreenView.exe, I see that the root causes are hal.dll + 997f and ntkrnlpa.exe + f5b28. So far, I've had 14 accidents. I run the driver verifier and the causes are hal.dll + 726c and ntkrnlpa.exe + 2ea5a7 windrvr6.sys + 0. Any help is appreciated! Thank you.

  Timothy

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Vista starts with white screen - dwm.exe and dllhost.exe errors on the hard drive.

  original title: freezing after login! ... disk hard dwm.exe and dllhost.exe errors. As usual load screen and then nothing can be used/open to all. Occasionally start opens and closes and nothing else beyond.

  Cannot use the laptop mode safe mode with networking. Have you tried to repair registry free of bugs and using Vista install with view to repair OS repair disk, but there are a lot of people having this problem different from this problem with dwm.exe dwm.exe or versions/varieties. This is is produced immediately after the download and installation of Microsoft Updates I might add.  Please can someone help?  Thank you very much... LiZ :)

  Never use Registry Repair programs.

  They can cause more harm than good.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• errors.__Programs bad image Explorer.exe and dwm.exe chrome.exe gel!

  Laptop has gone haywire, a couple of days and were not abloe to use it since. End laptop will start, then freeze as soon as I click on something. The cursor stays on loading mode (blue circle) until I have to manually turn off. I ran windows Defender, but he couldn't finish before freezing. I had Google chrome.exe bad image or dwm.exe and explorer.exe errors pop up. I even tried to run in safe mode, but my malwarebytes scan froze at the 6 minute mark. If all else fails, I'll have to re - install Vista, but hoped for more suggestions of your savvy it professionals there. IM on Vista Home btw.

  Altogether. Yes, you can replace a hard drive in a laptop. If the laptop is still under warranty, contact Dell technical support. If this isn't the case, you can buy a hard drive for the laptop to your favorite online or offline store. I normally buy equipment in NewEgg.com. Of course, you will need to install Windows on your new hard drive. If you do not have a recovery with her media, you need get the Dell disks. After you have installed Windows on your new hard drive, if it was not with a recovery disk, you will need to download/install drivers and utilities from the Dell Web site, update Vista Service Pack 2, do all the Windows updates, install a good antivirus (I recommend ESET NOD32 for a commercial and Avast for a free) restore your data from backup.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  Dell - request backup discs - http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form

  MS - MVP - Elephant Boy computers - don't panic!

• error: do not copy WIMGAPI.dll and NAPP7x64.exe of ram

  I'm trying to factory reset my laptop that is running Windows 7.

  I get these errors of two 2 ("' error: fail to copy the WIMGAPI.dll file to ram" and "error: fail to copy NAPP7x64.exe of ram" "), the one right after the other.

  What can at the factory to reset the laptop without the CD with Windows 7?

  

  

  Hello

  I understand that you are trying to reset the PC to the factory settings (without CD) and you receive these errors. I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the PC?
  • Are you facing problems with the PC you want to reset to factory settings?
  • Which operating system was installed when you bought the PC?

  The error you receive may be due to a corrupt disk sector or your recovery partition is corrupted.

  Your computer is equipped with a recovery instead of disk partition.

  This is how the recovery partition is available for the most popular brands:

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery disks.

  After the reset, you should count with all updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

  Note: Back up your data prior to factory reset.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Error in MAP using PLINK.exe and PSCP.exe

  Working on a script in PowerCLI which allows me to audit security and re-concile ESXi from the security settings for all our guests. For the ESXi 'Message of the day' host, I check to see if the file ' / etc/issue "is filled with the warning banner I want and if it is not, copy the correct file. The problem is one of our environments has 20 + ESXi hosts on the same subnet. For some reason, some of the guests become ' pam_sm_authenticate: failed [error code: 40017] "and access denied when I try to run PSCP.exe and PLINK.exe. Firewalls between hosts and my script box is clean and its looks like the connection is made.  Anyone have an idea on why some hosts the same generation, config, FW rules and subnet would work for some but not others?

  -ESXi Var\log\auth error - "pam_sm_authenticate: failed [error code: 40017]."

  -Error PowerCLI\PowerShell;

  Connect to % IP % port 22 host

  Server version: SSH - 2.0 - OpenSSH_6.6.1

  Using the SSH version 2 Protocol

  We pretend that version: SSH - 2.0 - PuTTY_Release_0.61

  Diffie-Hellman group Exchange

  Make the exchange of keys Diffie-Hellman with SHA-256 hash

  Footprint of the host key is:

  SSH - rsa 2048 RSA KEY % %

  Detected-> server encryption AES-256 SDCTR customer

  Detected-> MAC Server algorithm HMAC-SHA1 customer

  Initialized AES-256 SDCTR Server-> client encryption

  HMAC-SHA1 Server detected-> client MAC algorithm

  Using the user name "root".

  ******************************************************************

  Message from the WARNING message % day\Banner %

  ******************************************************************

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Access denied

  Received disconnect message (Protocol error)

  Disconnect message text: too many failures for root authentication

  Server disconnect message has

  Type 2 (Protocol error):

  "Too many failures for root authentication."

  * PLINK and PSCP is part of the PuTTY application group. PLINK is to run the CLI and PSCP commands remotely, is to copy the files via SCP.

  Yes, all nodes have been running the same version.

  It seems that this could be a problem with the same or agents. We noticed while speaking with the support that only systems which were related to the area were affected. It turns out that if separate you them from the field and then stop the Service Active Directory, it will suddenly start working. Support is always trying to figure our why, as the error only we were what I mentioned in the previous announcement.

  LucD thanks for the reply.

• Error 'TSUVEF.exe' and "TCA.exe" have stopped working.

  Yesterday I stupidly opened an attatchment email and soon discovered that it was a virus, the worst I've seen to be honest, he had allsorts of keyloggers and Trojans to the breast. I installed my anti-virus software that sent the virus and also installed antispyware who got rid of the other of the United-desirables Nations.

  Although everything is now clean, when I restart my computer, I get the message "TSUVEF.exe has stopped working" and "TCA.exe has stopped working" (the latter is not pop up more that this may have been a product of the virus.

  But 1 appears on occasion and as such a unusable EACH link, shortcut and the program on my PC.

  When I goto my Start menu and click on one of the many programs installed (including my web browser) I get the dialog box that appears "choose the program you want to open this file..."

  Absolutely everything THAT seems to have lost his path or your identity, I have so much work on my computer I don't want to have to format, is there another solution?

  Thank you.

  Your computer is still not clean or infections damaged the operating system too bad.

  Go through these stages of systematically General malware removal:
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

  http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
  http://tinyurl.com/yoeru3 - download link and further instructions

  You can also check to see if it has targeted for removal for your malware here steps:
  Bleeping computer removal how - to - http://www.bleepingcomputer.com/forums/forum55.html
  Or here: Malwarebytes malware removal guide - http://tinyurl.com/5xrpft

  When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• CEC_main.exe and TosIPCSrv.exe does not

  Error messages received at the start for these two files. "Cannot run CEC_main.exe... Please reinstall" and "TosIPCSrv.exe has stopped working and was closed..." "How can I sort this point, please? May be related to the installation of the toolbar for Firefox?

  Post edited by: humphreyyg

  Hello

  I found an info that the TosIPCSrv.exe seems to belong to the Toshiba S.M.A.R.T. Log Service

  I think that it of a utilitarian protection of the HARD drive and maybe you should try to reinstall it.

  Welcome them

• Re: Satellite slow C due to osIndicator.exe and tosKillerindicator.exe

  Hello!

  In my laptop appear 2 errors known as tosIndicator.exe and tosKillerindicator.exe and because it is very slow and gets stuck, anyone could hel me?

  I have can´t delete Toshiba WLAN.

  Your ad is very confusing and maybe you should offer more information.
  What model do you have?
  What operating system do you use?
  Are you using the original OS that you got with your laptop?

  Why would you remove Toshiba WLAN?

• Live control error 2983 while building an exe which has source

  Hello

  I am tyring to generate an exe for a code that has the control code source screw inside. I get error 2983 while running the exe. I did some research and found that on the three parameters that must entered in the ini file. I did this and the NI_SCC_P4CMD.lvlib also added to the dependency. I still get the error. don't know what I'm doing here. Here's my variables in the ini file

  SCCConfigData = 'TRUE; TRUE; »
  Necessarily SCCProviderName = "command line".
  SCCProviderLocation = "P4CMD".

  people of Nevermind. I added the file to the list always included instead of the .lib file and it works great!

• Color LaserJet 500 M551: printer displays error message: error PCL XL and GE issued WARNING 75

  Suddenly, I'm unable to print documents on all HP printers when they used to work perfectly. To print a test page for my work printers, printers print a page saying: "GE publ. WARNING: ' 75 When I try to print a document from the printed page says: "PCL XL error, subsystem: kernel, error IllegalTag operator: Oxba, post: 75. The error varies from printer to printer, but all say error PCL XL.

  I tried uninstalling all printers and drivers, the removal of all traces of the drivers in the registry and in the file spool\drivers\x64\3 and then by reinstalling the latest driver on the HP site. I also tried to change the printing preferences. I also tried the universal PCL6, PCL5 and PS drivers. Although it has never been a connection problem or to initiate a print job, I always get the same accurate print of the above errors.

  Please help me. Thank you

  After finding a few other posts of similar problems, the solution is simply to disable to moy. Their new updates randomly intereferes with printing.