Key USB airport disappears

Similar Questions

• Satellite A500 - 14K - key USB not recognized with Windows 7

  I have a Toshiba Satellite A500 14 K, it was pre-installed for Windows 7.
  I bought the upgrade to Windows 7: I got a PC upgrade disk and a windows upgrade disk. I launched the first disk, then the other.
  There was no particular error in these facilities.

  Since this upgrade, my PC doesn't recognize USB keys while they work perfectly with the previous version of windows with this pc. They are normally key usb plug-and-play. When I launched the update of windows, the driver exists, but installation failed in error with a message of access problem.
  I check that the firewall does not block access. I installed the latest version of the BIOS

  I can't find any similar pb on the forum
  Thank you for your help

  Hello

  Have you tried to update (restore) chipset utility?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Is there a driver 64 for key USB DVB - T Tuner TOSHIBA PX1211E-1TVD?

  Hello
  I am usiing the key USB DVB - T Tuner TOSHIBA PX1211E-1TVD and can not find a driver for Win 7 64 bit.
  Are there Tom Driver for this OS?
  Or is it possible to use it without a specific driver? I mean something like BDA or more (I don't know-.-)

  Tanks

  Hello!

  > can not find a driver for Win 7 64 bit.
  Why you can t find a driver? What do you think could be the reason for this? Is it really so strange?

  Let me give you a little tip: Windows 7 is not yet on the market and so there is no drivers for Windows 7 available. All that s!

  You can try the Vista drivers because most of them also works on Windows 7, but it's all for the moment you can do.

  Good bye

• I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?

  I allredy backup data, how to restore backup of key USB for windows 2008 r2 standard?

  Hello

  The question you posted would be better suited in the TechNet Forums. I suggest you to send your query to the TechNet forum for better support.

  TechNet > Windows Server Forums > management
  
  

• location code product key my label disappeared

  location code product key my label disappeared

  The other post:

  my label is gone I have no box or cd for location code product key

  GD,

  You can use "Product Key Finder" to find the product key of the windows registry:

  http://www.gearboxcomputers.com/products/product-key-Finder/

  LC

• Update of key USB IBM

  Hi guys,.

  You just bought key USB IBM. They are version 5.0 how update 5.1? I can download an ISO, but don't know how to get it on the USB sticks?

  You should be able to boot from the ISO that you downloaded and select the existing USB drive as the installation drive. When the installation program detects an existing installation of ESXi and VMFS datastore you can choose to upgrade ESXi and preserve the VMFS datastore.

  Just take a backup before you do so that you have a roll back option.

  See the link below;

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.VCLI.examples.doc_50/cli_manage_hosts.4.4.html

  Important: The vicfg-cfgbackup command is available only for ESXi hosts. The command is not available through a connection to the system server vCenter. No equivalent command of ESXCLI is supported.

• Copy (cloning) a key USB of VMware ESXi

  Hi all

  I have a question about the copy of a key USB VMware (a USBkey VMware is an IBM option (in fact, any major brand for that matter) supported). Lack of VMware ESXi 5 from a USB key using the UEFI. Recently the USB has renounced us, so we reinstalled VMware ESXi5, installed updates and set up the latter again and everything works again fine, but to save time to stop in the future we would like to keep a copy of the USB on the tablet. Is there an easy way to easily copy this USB?

  The following would work? :

  1. stop the server

  2 boot from a Linux live DVD

  3. Insert the USB source

  4. Insert the USB of destination

  5 open a terminal

  6. start: If dd \u003d/dev/sda of = / dev/sdb (after checking admesg | grep like command course)

  7. shut down the pc when done

  8. replace the USB source on the server

  9. starting the server

  Is there anyone who has any experience with this?

  Yep - that should do it

• How to access a USB key on airport express

  I have my music on a USB hard drive connected to my Airport Express Extreme and it rarely connects to it. How can I get my iTV to transfer music?

  An express cannot use a hard drive... only the extreme or time capsule.

  I'm not sure what you mean by iTV... an apple TV needs to work with iTunes... If you need to use a computer if you have the iTunes library on the hard drive. Then mount the disc in iTunes to see the library and the Apple TV can then use it.

  A smart cannot use normal TV no matter which airport to apple as a media store... Airport routers have no extension of media.

  A WD TV live can use a hard drive connected to an extreme example... because it's an appropriate media player. But smart TV requires the protocol support DLNA... that doesn't use Apple.

• My key USB Lexar is recognized but then disappears

  I bought a Lexar TwistTurn FlashDrive in December.  It worked perfectly with Windows XP and Vista, but my computer with Windows 7 on it gave me problems.

  The computer is a Compaq with Windows 7 pre-installed.

  When I plug the flash drive into one of the USB ports, it is recognized and autoplay starts, but 10 seconds after the AutoPlay window opens, it closes and the flash drive is no longer recognized.  This continues in a cycle for as long I let the flash drive is plugged.

  I googled this problem to death and have found no solution.  I also contacted Lexar support and I was told that the problem is probably caused by the pre-installed drivers.  I checked that my OS is up to date (it is), as well as trying to find the drivers to re - install on the manufacturer's website.  They may be there somewhere, but I couldn't find them.

  I'm pretty close at the end of my rope with this problem: Please help?

  Hello
   
   
  Normally the usb drivers work with the built-in Windows drivers. Given that the drive is detected that it should not be a problem with the drivers.
   
  Method 1.
  Let us check and Open the hardware and devices Troubleshooting If this solves the problem automatically. refer to the article below for the procedure. If the problem is to move the methods listed below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2.
  I would ask you to uninstall the USB in Device Manager and then restart the computer and re - insert the hard drive and check. Navigate to the Bus USB controllers in Device Manager and right-click on the drive and click on uninstall and restart the computer. Once the computer is restarted, connect the usb drive and check.
   
  Here is the link to Lexar support:
  http://www.Lexar.com/support/index.html
   
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to copy music from a key usb to itunes

  kindly help. I have music on my usb key and you want to copy in my iTunes

  Insert the drive.

  Drag the music to iTunes

• Who to back up data from USB airport

  Hello everyone,

  I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick.

  Are there suggestions, how these files within the USB stick file system can be backed up to another another drive?

  Is it possible to include the Airport extreme network shares in a local machine to a Mac attached Time backup?

  Kind regards

  Volker

  I have an older version of Airport Extreme (7.6.4 firmware version) that has a USB drive connected as a fileshare storage device. Now, I'm looking for a good concept of backup files stored on the USB - stick.

  Are there suggestions, how these files within the USB stick file system can be backed up to another another drive?

  You must use a program that backs up network drives. Such a program would be Carbon Copy Cloner.

  Is it possible to include the Airport extreme network shares in a local machine to a Mac attached Time backup?

  Sorry, but no. Time Machine can back up only of the following sources:

  • Internal hard drive to the Mac
  • An external drive connected directly to a Mac.

• Satellite T130 - 11 H - problems trying to start with a key USB Ubuntu 10.10

  As the title says I have problems with my laptop I'm unable to initialize the device with a USB key with Ubuntu.

  Any suggestions to solve my problem?
  See you soon!

  Hello

  The BIOS is certainly able to boot from a USB flash drive.
  You need to connect the USB to the computer, then turn on the unit and press F12
  Now you should be able to see the USB flash drive like device starting.
  Select this option and press ENTER.

  That s it

  PS: of course, we must make sure that Linux bootable flash drive.

• Satellite L300 gives a BSOD with network key USB "alcatel x 220.

  I received a new key "alcatel x 220" from the phone company network and after that he moved to my l300 laptop gives me a blue screen at all the usb 3
  But the netstick does not work on my pc
  I've updated the bios with toshibas update and the screen stays blue

  Help, please

  I know it may seem stupid now but third party hardware or software use is not about Toshiba s and if there is a problem, you should contact the manufacturer s support and ask for help.

  They have the best experience with own product and I presume that they tested on different hardware platforms and operating systems.

  Call Alcatel s support and ask for help.

• Satellite S50 - key USB Bootable for OS Backup

  Good evening everyone

  I am trying to resume my S50 Satellite to factory settings and wonder if I could save the Windows 8.1 on a new USB 16 GB as a bootable drive?

  Thanks in advance

  Stephen

  Original recovery image is saved on the HARD drive and you can create a bootable recovery media and using this bootable USB key you can install the original version of Windows that you got with your laptop.
  Using of preinstalled Toshiba Recovery Media Creator you can do.
  I have S50 - B and I created a USB recovery media. I used 16GB USB DRIVE.

  How it all works, you can read in the document of the user manuals.

  If you have any other questions do not hesitate to ask.

• PROTECTED Z10t starts key USB NI USB CD-ROM

  Hello
  for some reason, I have to boot from a USB key memeory containing WinPE and Linux (depending on the task to perfom). My problem is I got blocked on the logo "Toshiba leading innovation" and nothing else happens.
  As soon as I remove the USB key, it starts from the internal drive.

  I tested with an external CD-rom with no more success.
  All keys & CDs have been successfully on other hardware platforms.

  Thanks in advance

  > To boot from an external device with any OS you disable safe in the Security menu in the BIOS mode, and then change the startup (from UEFI to CSM) mode

  Yes, that's correct.
  By the way: this theme has been tested here in the forum several times and there are discussions linking to this document:
  [BIOS configuration changes are necessary, if booting from external devices is required (Genuine Windows 8 units) | http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm]